A Closed Form Solution for the Energy Release Rate of the Double Cantilever Beam Specimen with an Adhesive Layer

A simple, yet accurate, strength of materials approach is used to derive a closed form solution for the compliance and energy release rate of the double cantilever beam specimen with an adhesive layer and cohesive cracks. Such capability currently is not available in the literature. The results are valid for either isotropic or orthotropic mate nals in plane stress or plane strain. The specimen is modelled as a beam partially free and partially supported by an elastic foundation. The solution is an extension of previous work by Kanninen [1] for the special case of a homogeneous material (e.g., no adhesive layer). The closed form results are subsequently verified using the finite element method. Ex cellent agreement is found for a variety of crack lengths and material properties. It is shown that, for composite adherends, shear deformation must be taken into account in ad dition to elastic foundation effects. The present results are useful in analyzing test results to determine the fracture toughness of adhesives and composite laminates with adhesive interlayers or resin rich ply interfaces, and in sizing specimens.

[1]  Richard Schapery,et al.  Effect of Finite Width on Deflection and Energy Release Rate of an Orthotropic Double Cantilever Specimen , 1988 .

[2]  I. Raju,et al.  Factors Influencing Elastic Stresses in Double Cantilever Beam Specimens , 1988 .

[3]  M. F. Kanninen,et al.  An augmented double cantilever beam model for studying crack propagation and arrest , 1973, International Journal of Fracture.

[4]  John W. Gillespie,et al.  Finite element analysis of the end notched flexure specimen for measuring mode II fracture toughness , 1986 .

[5]  M. Williams.  The fracture threshold for an adhesive interlayer , 1970 .

[6]  James M. Whitney,et al.  A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite Materials , 1982 .

[7]  J. Eisenmann,et al.  Characterizing delamination growth in graphite-epoxy , 1982 .

[8]  S. S. Wang,et al.  An analysis of the crack tip stress field in DCB adhesive fracture specimens , 1978 .

[9]  W. Fichter.  The stress intensity factor for the double cantilever beam , 1983 .

[10]  M. F. Kanninen,et al.  A dynamic analysis of unstable crack propagation and arrest in the DCB test specimen , 1974 .

[11]  Kl Reifsnider,et al.  Evaluation of GIC of a DCB Specimen Using an Anisotropic Solution , 1988 .

[12]  S. Mall,et al.  Finite-Element Analysis of End-Notch Flexure Specimens , 1986 .

[13]  J. L. Bitner,et al.  The interlaminar fracture of organic-matrix, woven reinforcement composites , 1980 .

[14]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[15]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[16]  Isaac M Daniel,et al.  Effects of strain rate on delamination fracture toughness of graphite/epoxy , 1985 .

[17]  L. Carlsson,et al.  Mode I Interlaminar Fracture of Interleaved Graphite/Epoxy , 1992 .

[18]  Zhigang Suo,et al.  Orthotropy rescaling and implications for fracture in composites , 1991 .

[19]  T. Hughes,et al.  Techniques for developing ‘special’ finite element shape functions with particular reference to singularities , 1980 .