Effects of a Solid Solution Outer Layer of TiO2 on the Surface and Electrochemical Properties of LiNi0.6Co0.2Mn0.2O2 Cathodes for Lithium-Ion Batteries through the Use of Thin-Film Electrodes
暂无分享,去创建一个
[1] Hyuk-Ki Cho,et al. Energy density improvement by controlling the properties of conductive agents in Ni‐rich cathodes , 2021, International Journal of Energy Research.
[2] J. Woo,et al. Analyzing the Electrochemical Properties about Artificially Degraded Structure of NCM Cathode , 2021, Journal of The Electrochemical Society.
[3] E. Seki,et al. STEM-EELS analysis of improved cycle life of lithium-ion cells with Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode active material , 2021, Journal of Alloys and Compounds.
[4] X. Zhong,et al. Binding mechanisms of PVDF in lithium ion batteries , 2021, Applied Surface Science.
[5] Hong Dong,et al. Which of the nickel-rich NCM and NCA is structurally superior as a cathode material for lithium-ion batteries? , 2021, Journal of Materials Chemistry A.
[6] Jinbao Zhao,et al. Insight into the Redox Reaction Heterogeneity within Secondary Particles of Nickel-Rich Layered Cathode Materials. , 2021, ACS applied materials & interfaces.
[7] M. T. Elm,et al. Thin Film NCM Cathodes as Model Systems to Assess the Influence of Coating Layers on the Electrochemical Performance of Lithium Ion Batteries , 2021, Advanced Materials Interfaces.
[8] A. Manthiram,et al. A review on the stability and surface modification of layered transition-metal oxide cathodes , 2021, Materials Today.
[9] R. Gupta,et al. Surface modification of cathode materials for energy storage devices: A review , 2021 .
[10] Lei Cheng,et al. Al-doping enables high stability of single-crystalline LiNi0.7Co0.1Mn0.2O2 lithium-ion cathodes at high voltage , 2020, RSC advances.
[11] Qingyu Li,et al. Stable surface construction of the Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material for high performance lithium-ion batteries , 2020, Journal of Materials Chemistry A.
[12] Huixian Xie,et al. A general route of fluoride coating on the cyclability regularity of high-voltage NCM cathodes. , 2020, Chemical communications.
[13] Feng Wu,et al. Advances and Prospects of Surface Modification on Nickel‐Rich Materials for Lithium‐Ion Batteries † , 2020 .
[14] Ling-Ling Xie,et al. Review of synthesis and structural optimization of LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium-ion batteries applications , 2020 .
[15] A. Popovich,et al. Comparison of conductive additives for high-power applications of Li-ion batteries , 2020, Ionics.
[16] C. Ouyang,et al. Formation and thermodynamic stability of oxygen vacancies in typical cathode materials for Li-ion batteries: Density functional theory study , 2020 .
[17] Wengao Zhao,et al. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries , 2020 .
[18] Arumugam Manthiram,et al. A reflection on lithium-ion battery cathode chemistry , 2020, Nature Communications.
[19] K. Du,et al. Conductive cyclized polyacrylonitrile coated LiNi0.6Co0.2Mn0.2O2 cathode with the enhanced electrochemical performance for Li-Ion batteries , 2020 .
[20] Ling-jun Guo,et al. Improved cycling stability of LiNi0.6Co0.2Mn0.2O2 through microstructure consolidation by TiO2 coating for Li-ion batteries , 2020 .
[21] A. Chakraborty,et al. Layered Cathode Materials for Lithium-Ion Batteries: Review of Computational Studies on LiNi1–x–yCoxMnyO2 and LiNi1–x–yCoxAlyO2 , 2020 .
[22] L. Gaines,et al. Cathode healing methods for recycling of lithium-ion batteries , 2019 .
[23] J. Janek,et al. Investigation into Mechanical Degradation and Fatigue of High-Ni NCM Cathode Material: A Long-Term Cycling Study of Full Cells , 2019, ACS Applied Energy Materials.
[24] Xin Liu,et al. In-situ thermal annealing Pt/Ti interphase layers for epitaxial growth of improved Li(Ni0.5Mn0.3Co0.2)O2 solid thin-film cathodes , 2019, Nano Energy.
[25] Hongcai Gao,et al. Oxalate co-precipitation synthesis of LiNi0.6Co0.2Mn0.2O2 for low-cost and high-energy lithium-ion batteries , 2019, Materials Today Communications.
[26] F. Gao,et al. Effects of Charge Cutoff Potential on an Electrolyte Additive for LiNi 0.6 Co 0.2 Mn 0.2 O 2 –Mesocarbon Microbead Full Cells , 2019, Energy Technology.
[27] A. Westover,et al. Synthesis of Ni-Rich Thin-Film Cathode as Model System for Lithium Ion Batteries , 2019, ACS Applied Energy Materials.
[28] Moon J. Kim,et al. Kinetic Stability of Bulk LiNiO2 and Surface Degradation by Oxygen Evolution in LiNiO2‐Based Cathode Materials , 2018, Advanced Energy Materials.
[29] I. Ivanov,et al. Electrolyte Solvation Structure at Solid-Liquid Interface Probed by Nanogap Surface-Enhanced Raman Spectroscopy. , 2018, ACS nano.
[30] Erik J. Berg,et al. In situ and Operando Raman Spectroscopy of Layered Transition Metal Oxides for Li-ion Battery Cathodes , 2018, Front. Energy Res..
[31] Jun Lu,et al. 30 Years of Lithium‐Ion Batteries , 2018, Advanced materials.
[32] Minjoon Park,et al. Prospect and Reality of Ni‐Rich Cathode for Commercialization , 2018 .
[33] Evan M. Erickson,et al. From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel‐Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries , 2018 .
[34] J. Janek,et al. Charge-Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation , 2017 .
[35] Zhixing Wang,et al. Metallurgy Inspired Formation of Homogeneous Al2O3 Coating Layer To Improve the Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material , 2017 .
[36] K. Zhou,et al. Roles of Al-doped ZnO (AZO) modification layer on improving electrochemical performance of LiNi1/3Co1/3Mn1/3O2 thin film cathode , 2017, Ionics.
[37] R. Klie,et al. Understanding the Role of Temperature and Cathode Composition on Interface and Bulk: Optimizing Aluminum Oxide Coatings for Li-Ion Cathodes. , 2017, ACS applied materials & interfaces.
[38] J. Janek,et al. Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries , 2017 .
[39] H. Lee,et al. A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials. , 2017, Physical chemistry chemical physics : PCCP.
[40] Yongyao Xia,et al. Fatigue in 0.5Li2MnO3:0.5Li(Ni1/3Co1/3Mn1/3)O2 positive electrodes for lithium ion batteries , 2016 .
[41] William E. Gent,et al. Persistent State‐of‐Charge Heterogeneity in Relaxed, Partially Charged Li1−xNi1/3Co1/3Mn1/3O2 Secondary Particles , 2016, Advanced materials.
[42] Kyeongjae Cho,et al. Unraveling the Origin of Instability in Ni-Rich LiNi1–2xCoxMnxO2 (NCM) Cathode Materials , 2016 .
[43] Deyu Wang,et al. Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 utilized in lithium ion battery , 2015 .
[44] Min-Joon Lee,et al. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.
[45] M. Chi,et al. Uncovering the roles of oxygen vacancies in cation migration in lithium excess layered oxides. , 2014, Physical chemistry chemical physics : PCCP.
[46] François Weill,et al. Different oxygen redox participation for bulk and surface: A possible global explanation for the cycling mechanism of Li1.20Mn0.54Co0.13Ni0.13O2 , 2013 .
[47] Jaephil Cho,et al. A new type of protective surface layer for high-capacity Ni-based cathode materials: nanoscaled surface pillaring layer. , 2013, Nano letters.
[48] A. Manthiram,et al. Calculations of Oxygen Stability in Lithium-Rich Layered Cathodes , 2012 .
[49] H. Verweij,et al. Structure and properties of ordered Li2IrO3 and Li2PtO3 , 2008 .
[50] Chunsheng Wang,et al. Characterization and Performance of LiFePO4 Thin-Film Cathodes Prepared with Radio-Frequency Magnetron-Sputter Deposition , 2007 .
[51] C. Julien,et al. Raman scattering of LiNi1−yAlyO2 , 2002 .
[52] J. D. Robertson,et al. Nanocrystalline Li x Mn2 − y O 4 Cathodes for Solid‐State Thin‐Film Rechargeable Lithium Batteries , 1999 .
[53] G. Nazri,et al. Raman Spectra and Transport Properties of Lithium Perchlorate in Ethylene Carbonate Based Binary Solvent Systems for Lithium Batteries , 1998 .