On investigating the soda-lime shot blasting of AZ31 alloy: Effects on surface roughness, material removal rate, corrosion resistance, and bioactivity

[1]  J. Petrů,et al.  Complex Corrosion Properties of AISI 316L Steel Prepared by 3D Printing Technology for Possible Implant Applications , 2020, Materials.

[2]  Chongxing Liu,et al.  Improving the stability and bioactivity of micro-arc oxidized calcium phosphate/titania porous coatings by high energy shot peening pretreatment , 2020 .

[3]  T. Hayakawa,et al.  Surrounding Tissue Response to Surface-Treated Zirconia Implants , 2019, Materials.

[4]  Gurminder Singh,et al.  Uniform and graded copper open cell ordered foams fabricated by rapid manufacturing: surface morphology, mechanical properties and energy absorption capacity , 2019, Materials Science and Engineering: A.

[5]  Yi Lin,et al.  The cell culture of titanium alloy surface modifications by micro-powder blasting and co-blast techniques , 2019, Surface Engineering.

[6]  E. Maire,et al.  Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy , 2019, International Journal of Fatigue.

[7]  R. Poprawe,et al.  Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties , 2018, Materials & Design.

[8]  R. Kiran,et al.  Influence of corrosion and surface roughness on wettability of ASTM A36 steels , 2018 .

[9]  E. Aghion,et al.  Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM) , 2017 .

[10]  E. Hamzawy,et al.  In vivo bioactivity evaluation for an inexpensive biocompatible composite based on wollastonite ceramic/soda-lime-silica glass , 2017 .

[11]  I. Gibson,et al.  Improving EDM Process on AZ31 Magnesium Alloy towards Sustainable Biodegradable Implant Manufacturing , 2017 .

[12]  Jenn‐Ming Yang,et al.  Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing , 2016 .

[13]  James F Curtin,et al.  Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications. , 2016, Materials science & engineering. C, Materials for biological applications.

[14]  R. Gadow,et al.  High-velocity suspension flame sprayed (HVSFS) soda-lime glass coating on titanium substrate: Its bactericidal behaviour , 2016 .

[15]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[16]  B. S. Pabla,et al.  Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining , 2015, Journal of Materials Engineering and Performance.

[17]  A. Boccaccini,et al.  Iron and iron-based alloys for temporary cardiovascular applications , 2015, Journal of Materials Science: Materials in Medicine.

[18]  David Dean,et al.  Metals for bone implants. Part 1. Powder metallurgy and implant rendering. , 2014, Acta biomaterialia.

[19]  W. C. Liu,et al.  Surface characteristics and fatigue performance of warm shot peened wrought magnesium alloy Mg–9Gd–2Y , 2014 .

[20]  R. Torrecillas,et al.  Mechanical performance of a biocompatible biocide soda-lime glass-ceramic. , 2014, Journal of the mechanical behavior of biomedical materials.

[21]  B. Hadzima,et al.  Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD). , 2014, Materials science & engineering. C, Materials for biological applications.

[22]  Amir Arifin,et al.  Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: A review , 2014 .

[23]  R. Kollar,et al.  Physico-chemical characterization and the in vitro genotoxicity of medical implants metal alloy (TiAlV and CoCrMo) and polyethylene particles in human lymphocytes. , 2014, Biochimica et biophysica acta.

[24]  Hyoun‐Ee Kim,et al.  Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer. , 2013, Materials science & engineering. C, Materials for biological applications.

[25]  Gérrard Eddy Jai Poinern,et al.  Biomedical Magnesium Alloys: A review of material properties, surface modifications and potential as a biodegradable orthopaedic implant , 2013 .

[26]  M. Tan,et al.  Effect of calcium oxide on the corrosion behaviour of AZ91 magnesium alloy , 2012 .

[27]  E. Saiz,et al.  Soda-lime glass-coating containing silver nanoparticles on Ti–6Al–4V alloy , 2012 .

[28]  M. Schulz,et al.  In Vivo and In Vitro Degradation Behavior of Magnesium Alloys as Biomaterials , 2012 .

[29]  M. Consonni,et al.  Manufacturing of welded joints with realistic defects , 2012 .

[30]  M. Fathi,et al.  Biphasic calcium phosphate coating on cobalt-base surgical alloy during investment casting , 2011, Journal of materials science. Materials in medicine.

[31]  R. Walter,et al.  Influence of surface roughness on the corrosion behaviour of magnesium alloy , 2011 .

[32]  Y. Miyashita,et al.  Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy , 2011 .

[33]  T. Woodfield,et al.  Synthesis of topologically-ordered open-cell porous magnesium , 2010 .

[34]  M. Horstemeyer,et al.  Corrosion relationships as a function of time and surface roughness on a structural AE44 magnesium alloy , 2010 .

[35]  C. Alves,et al.  Effect of titanium surface modified by plasma energy source on genotoxic response in vitro. , 2009, Toxicology.

[36]  George Leghorn,et al.  THE STORY OF SHOT PEENING , 2009 .

[37]  L. Wagner,et al.  The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy , 2009 .

[38]  Amir Siddiq,et al.  Thermomechanical analyses of ultrasonic welding process using thermal and acoustic softening effects , 2008 .

[39]  Berend Denkena,et al.  Biocompatible Magnesium Alloys as Absorbable Implant Materials – Adjusted Surface and Subsurface Properties by Machining Processes , 2007 .

[40]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[41]  David Kennedy,et al.  Micro shot blasting of machine tools for improving surface finish and reducing cutting forces in manufacturing , 2005 .

[42]  S. Raman,et al.  Effect of shot blasting on plain fatigue and fretting fatigue behaviour of Al–Mg–Si alloy AA6061 , 2005 .

[43]  Her-Hsiung Huang,et al.  Effect of surface roughness of ground titanium on initial cell adhesion. , 2004, Biomolecular engineering.

[44]  P. Gillström,et al.  Replacement of pickling with shot blasting for wire rod preparation , 2004 .

[45]  Maxence Bigerelle,et al.  In vitro MC3T3 osteoblast adhesion with respect to surface roughness of Ti6Al4V substrates. , 2002, Biomolecular engineering.

[46]  D. Deligianni,et al.  Effect of surface roughness of hydroxyapatite on human bone marrow cell adhesion, proliferation, differentiation and detachment strength. , 2001, Biomaterials.