论文信息 - A Robust decentralized joint control based on interference estimation

A Robust decentralized joint control based on interference estimation

The dynamics of the multi-degrees of freedom manipulator is highly nonlinear and the compensationagainst this nonlinearity should be indispensable. This paper proposes the decentralizedjoint control method based on the disturbance observer where the dynamical equation is not directly solved. By using the information of the acceleration, the nonlinear term in the dynamical equation is estimated without the mathematically complicated process, and as a result, the joints are able to be decoupled and controlled independently each other by using even 16 bit microprocessors. The simulated and experimented results are shown in the paper to confirm the industrial viability of this method.

[1] J. Meditch,et al. Observers for systems with unknown and inaccessible inputs , 1973, CDC 1973.

[2] J. Y. S. Luh,et al. Resolved-acceleration control of mechanical manipulators , 1980 .

[3] J. Y. S. Luh,et al. On-Line Computational Scheme for Mechanical Manipulators , 1980 .

[4] J. S. Luh,et al. Joint torque control by a direct feedback for industrial robots , 1981, 1981 20th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[5] E. Freund. Fast Nonlinear Control with Arbitrary Pole-Placement for Industrial Robots and Manipulators , 1982 .

[6] J. Y. S. Luh,et al. Conventional controller design for industrial robots — A tutorial , 1983, IEEE Transactions on Systems, Man, and Cybernetics.

[7] Masayoshi Tomizuka,et al. An adaptive control scheme for mechanical manipulators. Compensation of nonlinearity and decoupling control , 1986 .

[8] Kouhei Ohnishi,et al. Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System , 1985, IEEE Transactions on Industrial Electronics.