Alternating current investigation and modeling of the temperature and ozone effects on the grains and the grain boundary contributions to the WO3 sensor responses

Abstract We report a parametric investigation of the electrical property evolution of WO 3 thin films in ozone. The effect of working temperature and ozone concentration on sensors' sensitivity has been studied by alternating current (AC) impedance spectroscopy. An electrical model of resistance and capacitor circuit was used to fit the experimental spectra. It was demonstrated that the best sensors' sensitivity is obtained in the working temperature range of 250 to 300 °C. A tentative interpretation of the sensors' response evolution has been made by modeling of the ozone concentration effect on the WO 3 sensitive layer impedances after obtaining additional AC measurements. The contributions of the grains and grain boundaries to the overall response of the WO 3 based sensors were dissociated.

[1]  G. Láng,et al.  The impedance related to the electrochemical hydrogen insertion into WO3 films – On the applicability of the diffusion-trapping model , 2008 .

[2]  Noboru Yamazoe,et al.  Effects of additives on semiconductor gas sensors , 1983 .

[3]  Khalifa Aguir,et al.  Electrical properties of reactively sputtered WO3 thin films as ozone gas sensor , 2002 .

[4]  M. Maaref,et al.  dc and ac characterizations of WO3 sensors under ethanol vapors , 2006 .

[5]  S. Mahdavi,et al.  Pulsed laser deposition of W–V–O composite films: Preparation, characterization and gasochromic studies , 2008 .

[6]  N. Yamazoe,et al.  Preparation of aqueous sols of tungsten oxide dihydrate from sodium tungstate by an ion-exchange method , 2002 .

[7]  Khalifa Aguir,et al.  Impedance spectroscopy on WO3 gas sensor , 2005 .

[8]  Detection of dilute nitrogen dioxide and thickness effect of tungsten oxide thin film sensors , 2003 .

[9]  Khalifa Aguir,et al.  Ethanol and ozone sensing characteristics of WO3 based sensors activated by Au and Pd , 2006 .

[10]  K. Galatsis,et al.  MoO3, WO3 Single and Binary Oxide Prepared by Sol-Gel Method for Gas Sensing Applications , 2003 .

[11]  C. Bittencourt,et al.  Influence of the annealing and operating temperatures on the gas-sensing properties of rf sputtered WO3 thin-film sensors , 2005 .

[12]  Marco Faccio,et al.  Cross sensitivity and stability of NO2 sensors from WO3 thin film , 1996 .

[13]  Wojtek Wlodarski,et al.  A thin-film sensing element for ozone, humidity and temperature , 2000 .

[14]  Yan Zhao,et al.  Pulsed laser deposition of WO3-base film for NO2 gas sensor application , 2000 .

[15]  Andrey Bratov,et al.  Enzyme semiconductor sensor based on butyrylcholinesterase , 1991 .

[16]  A. Grisel,et al.  Some aspects of the interaction of oxygen with polycrystalline SnOx thin films , 1990 .

[17]  N. Yamazoe.  New approaches for improving semiconductor gas sensors , 1991 .

[18]  N. Yamazoe,et al.  Wet process-based fabrication of WO3 thin film for NO2 detection , 2004 .

[19]  Norio Miura,et al.  Tungsten Oxide-Based Semiconductor Sensor Highly Sensitive to NO and NO2 , 1991 .

[20]  W. Kenan,et al.  Impedance Spectroscopy: Emphasizing Solid Materials and Systems , 1987 .

[21]  J Yang,et al.  Influence of binders on the sensing and electrical characteristics of WO3-based gas sensors , 1999 .

[22]  S. Yamamoto,et al.  Structural and gasochromic properties of epitaxial WO3 films prepared by pulsed laser deposition , 2008 .

[23]  U. Lampe,et al.  Metal Oxide Sensors , 1995, International Conference on Solid-State Sensors, Actuators and Microsystems.

[24]  K. Aguir,et al.  Reactive R.F. magnetron sputtering deposition of WO3 thin films , 2002 .

[25]  Junsheng Yu,et al.  Gas sensing characteristics of WO3 vacuum deposited thin films , 2007 .

[26]  M. Giulio,et al.  Physical and structural characterization of tungsten oxide thin films for NO gas detection , 1998 .

[27]  Henry Windischmann,et al.  A Model for the Operation of a Thin‐Film SnO x Conductance‐Modulation Carbon Monoxide Sensor , 1979 .

[28]  Khalifa Aguir,et al.  Characterization of ozone sensors based on WO3 reactively sputtered films: influence of O2 concentration in the sputtering gas, and working temperature , 2004 .

[29]  Lawrence L. Kazmerski,et al.  Polycrystalline and amorphous thin films and devices , 1980 .

[30]  Jiann Shieh,et al.  WO3 and WTiO thin-film gas sensors prepared by sol–gel dip-coating , 2002 .

[31]  J. Labrincha,et al.  An alternative representation of impedance spectra of ceramics , 2000 .

[32]  G. Molas,et al.  Effects of Oxygen Partial Pressure and Annealing Temperature on the Formation of Sputtered Tungsten Oxide Films , 2002 .

[33]  Khalifa Aguir,et al.  Thermal modelling of a WO3 ozone sensor response , 2005 .

[34]  M. Madou,et al.  Chemical Sensing With Solid State Devices , 1989 .

[35]  M. Deen,et al.  Sensors for detecting sub-ppm NO{sub 2} using photochemically produced amorphous tungsten oxide , 1998 .

[36]  Huan-Da Chen,et al.  Gas-sensing properties and complex impedance analysis of Ce-added WO3 nanoparticles to VOC gases , 2007 .

[37]  Wolfgang Göpel,et al.  SnO2 sensors: current status and future prospects☆ , 1995 .