Spindle speed variation technique in turning operations: Modeling and real implementation

Abstract Chatter is still one of the most challenging problems in machining vibrations. Researchers have focused their efforts to prevent, avoid or reduce chatter vibrations by introducing more accurate predictive physical methods. Among them, the techniques based on varying the rotational speed of the spindle (or SSV, Spindle Speed ​​Variation) have gained great relevance. However, several problems need to be addressed due to technical and practical reasons. On one hand, they can generate harmful overheating of the spindle especially at high speeds. On the other hand, the machine may be unable to perform the interpolation properly. Moreover, it is not trivial to select the most appropriate tuning parameters. This paper conducts a study of the real implementation of the SSV technique in turning systems. First, a stability model based on perturbation theory was developed for simulation purposes. Secondly, the procedure to realistically implement the technique in a conventional turning center was tested and developed. The balance between the improved stability margins and acceptable behavior of the spindle is ensured by energy consumption measurements. Mathematical model shows good agreement with experimental cutting tests.

[1]  Toshio Sata,et al.  Stability Analysis of Cutting under Varying Spindle Speed , 1977 .

[2]  L. N. López de Lacalle,et al.  An automatic spindle speed selection strategy to obtain stability in high-speed milling , 2009 .

[3]  Eiji Kondo,et al.  Countermeasure against chatter in end milling operations using multiple dynamic absorbers , 2013 .

[4]  Francisco J. Campa,et al.  Stability prediction in straight turning of a flexible workpiece by collocation method , 2012 .

[5]  S. A. Tobias Machine-tool vibration , 1965 .

[6]  Richard E. DeVor,et al.  Analytical Stability Analysis of Variable Spindle Speed Machining , 2000 .

[7]  L. N. López de Lacalle,et al.  Stability lobes for general turning operations with slender tools in the tangential direction , 2013 .

[8]  Tsu-Chin Tsao,et al.  A new approach to stability analysis of variable speed machining systems , 1993 .

[9]  Ciro A. Rodríguez,et al.  Determination of the stability lobes in milling operations based on homotopy and simulated annealing techniques , 2014 .

[10]  B. J. Stone,et al.  A stability analysis of single-point machining with varying spindle speed , 1977 .

[11]  Neil D. Sims,et al.  Analytical prediction of chatter stability for variable pitch and variable helix milling tools , 2008 .

[12]  Gábor Stépán,et al.  Stability Analysis of Turning With Periodic Spindle Speed Modulation Via Semidiscretization , 2004 .

[13]  L. Uriarte,et al.  Continuous workpiece speed variation (CWSV): Model based practical application to avoid chatter in grinding , 2009 .

[14]  Han Ding,et al.  Second-order full-discretization method for milling stability prediction , 2010 .

[15]  Gábor Stépán,et al.  Semi-Discretization for Time-Delay Systems: Stability and Engineering Applications , 2011 .

[16]  Gábor Stépán,et al.  Updated semi‐discretization method for periodic delay‐differential equations with discrete delay , 2004 .

[17]  Jokin Munoa,et al.  Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation , 2008 .

[18]  Eric A. Butcher,et al.  Stability of Up- and Down-Milling Using Chebyshev Collocation Method , 2005 .

[19]  I. E. Minis,et al.  A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling , 1993 .

[20]  Michele Monno,et al.  Efficient evaluation of process stability in milling with Spindle Speed Variation by using the Chebyshev Collocation Method , 2014 .

[21]  Jokin Munoa,et al.  Cylindrical milling tools: Comparative real case study for process stability , 2014 .

[22]  Richard E. DeVor,et al.  Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process , 2002 .

[23]  Keith Ridgway,et al.  Modelling of the stability of variable helix end mills , 2007 .

[24]  R N Arnold,et al.  Cutting Tools Research: Report of Subcommittee on Carbide Tools: The Mechanism of Tool Vibration in the Cutting of Steel , 1946 .

[25]  L. N. López de Lacalle,et al.  Regenerative vibration avoidance due to tool tangential dynamics in interrupted turning operations , 2014 .

[26]  Günter Radons,et al.  Application of spindle speed variation for chatter suppression in turning , 2013 .

[27]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .