The tone noise generated when a fan ingests circumferentially distorted flow was studied by an experiment conducted with the Advanced Noise Control Fan at the NASA Glenn Research Center. The inflow was distorted by inserting cylindrical rods radially into the duct. The rods were arranged in circumferentially irregular patterns in three of the five configurations tested. Rods were held in place using a mounting ring with 30 equally spaced holes placed at an axial location one rotor chordlength upstream of the fan. Acoustic pressure was measured in the inlet and exhaust duct of the fan using the Rotating Rake fan tone measurement system. Sound power levels, calculated from the measured data, were plotted as a function of circumferential mode. An analytic description of the unsteady pressure distribution at the interaction plane between the stationary rods and the fan rotor is presented in a form suitable for representing the circumferentially irregularly placed rods. Terms in the analytical description for sound power were proven to be useful in determining the dominant circumferential modes measured in the experiment and the differences in mode power level between the configurations tested. Insight gained through this work will be useful in the development of tools to compute fan inflow distortion tone noise.
[1]
Ricardo A. Burdisso,et al.
Fan Flow Control for Noise Reduction Part 3: Rig Testing of Optimal Design
,
2005
.
[2]
T. G. Sofrin,et al.
Asymmetric Stator Interaction Noise
,
1980
.
[3]
Raymond A. Loew,et al.
The Advanced Noise Control Fan
,
2006
.
[4]
Daniel Crichton,et al.
Engine And Installation Configurations For A Silent Aircraft
,
2005
.
[5]
Dennis L. Huff,et al.
Recent Developments in U.S. Engine Noise Reduction Research
,
2001
.
[6]
T. G. Sofrin,et al.
Axial Flow Compressor Noise Studies
,
1962
.
[7]
Beth A. Cooper.
A Large Hemi-Anechoic Enclosure for Community-Compatible Aeroacoustic Testing of Aircraft Propulsion Systems
,
1993
.