Evaluation of Ignition Timing Predictions Using Control-Oriented Models in Kinetically-Modulated Combustion Regimes
暂无分享,去创建一个
Timothy A. Smith | Steven S. McConnell | S. Scott Goldsborough | S. Goldsborough | Michael V. Johnson
[1] John E. Dec,et al. Boosted HCCI - Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline , 2011 .
[2] Abhijit Mukherjee,et al. Numerical Simulation of Autoignition of Gasoline-Ethanol/Air Mixtures under Different Conditions of Pressure, Temperature, Dilution, and Equivalence Ratio. , 2011 .
[3] T. W. Ryan,et al. Performance Predictions for High Efficiency Stoichiometric Spark Ignited Engines , 2005 .
[4] John E. Dec,et al. Thermodynamic and Chemical Effects of EGR and Its Constituents on HCCI Autoignition. , 2007 .
[5] Rolf Isermann,et al. Control of Mixture Composition Using Cylinder Pressure Sensors , 2001 .
[6] J Sanz-Argent,et al. Ignition delay time correlations for a diesel fuel with application to engine combustion modelling , 2010 .
[7] S. Scott Goldsborough,et al. A chemical kinetically based ignition delay correlation for iso-octane covering a wide range of conditions including the NTC region , 2009 .
[8] H. Yanagihara. A Study on Combustion Structure of Premixed Compression Ignition Diesel Engines , 2004 .
[9] Xin He,et al. An experimental and modeling study of iso-octane ignition delay times under homogeneous charge compression ignition conditions , 2005 .
[10] Zoran Filipi,et al. Analysis of Load and Speed Transitions in an HCCI Engine Using 1-D Cycle Simulation and Thermal Networks , 2006 .
[11] Atsushi Sakai,et al. Combustion in a two-stage injection PCCI engine with lower distillation-temperature fuels , 2004 .
[12] Yuzo Aoyagi,et al. Advanced Diesel Combustion Using of Wide Range, High Boosted and Cooled EGR System by Single Cylinder Engine , 2006 .
[13] Shuji Kimura,et al. Ultra - Clean Combustion Technology Combining a Low - Temperature and Premixed Combustion Concept fo , 2001 .
[14] Amir A. M. Oliveira,et al. Autoignition of gasoline surrogate mixtures at intermediate temperatures and high pressures: Experimental and numerical approaches , 2009 .
[15] Ronald Reese,et al. Ignition Delay Correlation for Predicting Autoignition of a Toluene Reference Fuel Blend in Spark Ignition Engines , 2011 .
[16] Kwee-Yan Teh,et al. Thermodynamic requirements for maximum internal combustion engine cycle efficiency. Part 1: Optimal combustion strategy , 2008 .
[17] William Cannella,et al. Partial Fuel Stratification to Control HCCI Heat Release Rates: Fuel Composition and Other Factors Affecting Pre-Ignition Reactions of Two-Stage Ignition Fuels , 2011 .
[18] Mahdi Shahbakhti,et al. Predicting Start of Combustion Using a Modified Knock Integral Method for an HCCI Engine , 2006 .
[19] Y. Aoyagi,et al. Improvement of thermal efficiency of a high-boosted diesel engine with focus on peak cylinder pressure , 2011 .
[20] Bradley T. Zigler,et al. Demonstration of a Free-Piston Rapid Compression Facility for the Study of High Temperature Combustion Phenomena , 2004 .
[21] John E. Dec,et al. EGR and Intake Boost for Managing HCCI Low-Temperature Heat Release over Wide Ranges of Engine Speed , 2007 .
[22] Mahdi Shahbakhti,et al. Predicting HCCI Auto-Ignition Timing by Extending a Modified Knock-Integral Method , 2007 .
[23] J. Christian Gerdes,et al. Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation , 2006 .
[24] A. Yates,et al. Insights relating to the autoignition characteristics of alcohol fuels , 2010 .
[25] Martin Eickhoff,et al. Combustion Pressure Based Engine Management System , 2000 .
[26] Ronald Reese,et al. Autoignition Characteristics of Primary Reference Fuels and their Mixtures , 2009 .
[27] Anna G. Stefanopoulou,et al. Sensitivity Analysis of Combustion Timing of Homogeneous Charge Compression Ignition Gasoline Engines , 2009 .
[28] Andy Yates,et al. An Improved Empirical Model for Describing Auto-ignition , 2008 .
[29] William J. Pitz,et al. An Approach for Formulating Surrogates for Gasoline with Application toward a Reduced Surrogate Mechanism for CFD Engine Modeling , 2011 .
[30] Kwee-Yan Teh,et al. Thermodynamic requirements for maximum internal combustion engine cycle efficiency. Part 2: Work extraction and reactant preparation strategies , 2008 .
[31] Tomoyuki Wakisaka,et al. A numerical study of the effects of boost pressure and exhaust gas recirculation ratio on the combustion process and exhaust emissions in a diesel engine , 2007 .
[32] R. Head,et al. HCCI experiments with gasoline surrogate fuels modeled by a semidetailed chemical kinetic model , 2009 .
[33] William J. Pitz,et al. Oxidation of automotive primary reference fuels at elevated pressures , 1999 .
[34] C. Westbrook,et al. A Comprehensive Modeling Study of iso-Octane Oxidation , 2002 .
[35] Scott B. Fiveland,et al. An Experimental Investigation of PCCI-DI Combustion and Emissions in a Heavy-Duty Diesel Engine , 2003 .
[36] C. Westbrook,et al. A Comprehensive Modeling Study of n-Heptane Oxidation , 1998 .
[37] Anna G. Stefanopoulou,et al. Stability Analysis in Homogeneous Charge Compression Ignition (HCCI) Engines With High Dilution , 2007, IEEE Transactions on Control Systems Technology.
[38] Chen-Fang Chang,et al. Cylinder-Pressure-Based Engine Control Using Pressure-Ratio-Management and Low-Cost Non-Intrusive Cylinder Pressure Sensors , 2000 .
[39] Steve Richardson,et al. Modelling and Experimental Investigations of Supercharged HCCI Engines , 2006 .
[40] Hans-Erik Ångström,et al. The Influence of NO on the Combustion Phasing in an HCCI Engine , 2006 .
[41] William J. Pitz,et al. Understanding the Chemical Effects of Increased Boost Pressure under HCCI Conditions , 2008 .
[42] John E. Dec,et al. Isolating the Effects of EGR on HCCI Heat-Release Rates and NO X Emissions , 2009 .
[43] John E. Dec,et al. Smoothing HCCI Heat-Release Rates Using Partial Fuel Stratification with Two-Stage Ignition Fuels , 2006 .
[44] Bradley T. Zigler,et al. A rapid compression facility study of OH time histories during iso-octane ignition , 2006 .
[45] John E. Dec,et al. Boosted HCCI for high power without engine knock and with ultra-low NOx emissions - Using conventional gasoline , 2010 .
[46] A. Stefanopoulou,et al. A mean-value model for control of Homogeneous Charge Compression Ignition (HCCI) engines , 2005 .
[47] Bradley T. Zigler,et al. An experimental investigation of iso-octane ignition phenomena , 2007 .
[48] C. Westbrook,et al. Kinetic modeling of gasoline surrogate components and mixtures under engine conditions , 2011 .