Dynamic Shear Fracture Behaviour of Granite Under Axial Static Pre-force by 3D High-Speed Digital Image Correlation

[1]  Yi Liu,et al.  Effects of pre-static loads on the dynamic pure mode I and mixed mode I–II fracture characteristics of rocks , 2023, Engineering Fracture Mechanics.

[2]  K. Xia,et al.  Dynamic Mode II Fracture Toughness of Rocks Subjected to Various In Situ Stress Conditions , 2022, Rock Mechanics and Rock Engineering.

[3]  Diyuan Li,et al.  Dynamic shear fracture behavior of rocks: insights from three-dimensional digital image correlation technique , 2022, Engineering Fracture Mechanics.

[4]  Xibing Li,et al.  Effects of axial pre-force and loading rate on Mode I fracture behavior of granite , 2022, International Journal of Rock Mechanics and Mining Sciences.

[5]  Diyuan Li,et al.  Effect of confining pressure on shear fracture behavior and surface morphology of granite by the short core in compression test , 2022, Theoretical and Applied Fracture Mechanics.

[6]  Xibing Li,et al.  Fracture mechanism and energy evolution of sandstone with a circular inclusion , 2022, International Journal of Rock Mechanics and Mining Sciences.

[7]  Xibing Li,et al.  Dynamic mechanical properties and wave propagation of composite rock-mortar specimens based on SHPB tests , 2022, International Journal of Mining Science and Technology.

[8]  Xibing Li,et al.  Experimental Study on the Dynamic Behavior of Sandstone with Coplanar Elliptical Flaws from Macro, Meso, and Micro Viewpoints , 2022, Theoretical and Applied Fracture Mechanics.

[9]  K. Xia,et al.  Effect of roughness on the shear behavior of rock joints subjected to impact loading , 2022, Journal of Rock Mechanics and Geotechnical Engineering.

[10]  T. Yin,et al.  Experimental investigation on the effect of open fire on the tensile properties and damage evolution behavior of granite , 2022, International Journal of Damage Mechanics.

[11]  M. Ayatollahi,et al.  Size effect in true mode II fracturing of rocks: Theory and experiment , 2022, European Journal of Mechanics - A/Solids.

[12]  Diyuan Li,et al.  Deformation and fracture behavior of granite by the short core in compression method with 3D digital image correlation , 2021, Fatigue & Fracture of Engineering Materials & Structures.

[13]  Diyuan Li,et al.  The mode I fatigue fracture of fine-grained quartz-diorite under coupled static loading and dynamic disturbance , 2021, Theoretical and Applied Fracture Mechanics.

[14]  K. Xia,et al.  Dynamic Mode Ⅱ fracture behavior of rocks under hydrostatic pressure using the short core in compression (SCC) method , 2021, International Journal of Mining Science and Technology.

[15]  T. Yin,et al.  Temperature dependences and rate effects on Mode II fracture toughness determined by punch-through shear technique for granite , 2021 .

[16]  K. Xia,et al.  Slip behavior of rough rock discontinuity under high velocity impact: Experiments and models , 2021 .

[17]  Xibing Li,et al.  Failure characteristics and meso-deterioration mechanism of pre-stressed coal subjected to different dynamic loads , 2021 .

[18]  Zhe-ming Zhu,et al.  Study on the microscopic damage evolution and dynamic fracture properties of sandstone under freeze-thaw cycles , 2021 .

[19]  T. Yin,et al.  Determination of the mixed mode I/II fracture characteristics of heat-treated granite specimens based on the extended finite element method , 2021, Engineering Fracture Mechanics.

[20]  Zhenyu Han,et al.  Failure characteristics of brittle rock containing two rectangular holes under uniaxial compression and coupled static-dynamic loads , 2021, Acta Geotechnica.

[21]  Zhenyu Han,et al.  Evaluation of Bi-modular Behavior of Rocks Subjected to Uniaxial Compression and Brazilian Tensile Testing , 2021, Rock Mechanics and Rock Engineering.

[22]  Xibing Li,et al.  Effect of Filling on Failure Characteristics of Diorite with Double Rectangular Holes Under Coupled Static–Dynamic Loads , 2021, Rock Mechanics and Rock Engineering.

[23]  K. Xia,et al.  An experimental system to evaluate impact shear failure of rock discontinuities. , 2021, The Review of scientific instruments.

[24]  M. Ayatollahi,et al.  Theory and experiment on true mode II fracturing of rocks , 2020 .

[25]  F. Shi,et al.  Numerical modeling and simulation of the electric breakdown of rocks immersed in water using high voltage pulses , 2020, Geomechanics and Geophysics for Geo-Energy and Geo-Resources.

[26]  K. Peng,et al.  Evolutionary characteristics of mode-I fracture toughness and fracture energy in granite from different burial depths under high-temperature effect , 2020 .

[27]  Zilong Zhou,et al.  Fracture behavior and damage mechanisms of sandstone subjected to wetting-drying cycles , 2020 .

[28]  M. Ayatollahi,et al.  Assessment of the fracture process zone in rocks using digital image correlation technique: The role of mode-mixity, size, geometry and material , 2020, International Journal of Damage Mechanics.

[29]  Diyuan Li,et al.  Deformation and fracture of circular tunnels under non-tectonic stresses and its support control , 2020, European Journal of Environmental and Civil Engineering.

[30]  P. Pan,et al.  Fracture analysis of Beishan granite after high-temperature treatment using digital image correlation , 2020 .

[31]  F. Dai,et al.  Dynamic tensile behavior of rocks under static pre-tension using the flattened Brazilian disc method , 2020 .

[32]  Zilong Zhou,et al.  Dynamic Response and Energy Evolution of Sandstone Under Coupled Static–Dynamic Compression: Insights from Experimental Study into Deep Rock Engineering Applications , 2019, Rock Mechanics and Rock Engineering.

[33]  K. Xia,et al.  Dynamic Mode II Fracture Toughness of Rocks Subjected to Confining Pressure , 2019, Rock Mechanics and Rock Engineering.

[34]  G. Zhao,et al.  Crack development in transversely isotropic sandstone discs subjected to Brazilian tests observed using digital image correlation , 2019, International Journal of Rock Mechanics and Mining Sciences.

[35]  Zilong Zhou,et al.  Water saturation effects on dynamic fracture behavior of sandstone , 2019, International Journal of Rock Mechanics and Mining Sciences.

[36]  K. Xia,et al.  Experimental study of dynamic bending failure of Laurentian granite: loading rate and pre-load effects , 2019, Canadian Geotechnical Journal.

[37]  Xiao-Ping Zhou,et al.  Fracturing Behavior Study of Three-Flawed Specimens by Uniaxial Compression and 3D Digital Image Correlation: Sensitivity to Brittleness , 2018, Rock Mechanics and Rock Engineering.

[38]  Jian Zhao,et al.  Full-field measurement and fracture characterisations of rocks under dynamic loads using high-speed three-dimensional digital image correlation , 2018 .

[39]  Yi Liu,et al.  An experimental and theoretical assessment of semi-circular bend specimens with chevron and straight-through notches for mode I fracture toughness testing of rocks , 2017 .

[40]  A. Taheri,et al.  Specimen aspect ratio and progressive field strain development of sandstone under uniaxial compression by three-dimensional digital image correlation , 2017 .

[41]  H. Mitri,et al.  Characterization of Aseismic Fault-Slip in a Deep Hard Rock Mine Through Numerical Modelling: Case Study , 2017, Rock Mechanics and Rock Engineering.

[42]  K. Xia,et al.  A dynamic punch-through shear method for determining dynamic Mode II fracture toughness of rocks , 2017 .

[43]  F. Lu,et al.  Dynamic Fracture Properties of Rocks Subjected to Static Pre-load Using Notched Semi-circular Bend Method , 2016, Rock Mechanics and Rock Engineering.

[44]  Abbas Taheri,et al.  Pre-Peak and Post-Peak Rock Strain Characteristics During Uniaxial Compression by 3D Digital Image Correlation , 2016, Rock Mechanics and Rock Engineering.

[45]  Tao Zhao,et al.  Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen , 2016 .

[46]  K. Xia,et al.  Dynamic tensile failure of rocks under static pre-tension , 2015 .

[47]  Gang Qi,et al.  Damage and Fracture Investigation of Three-Point Bending Notched Sandstone Beams by DIC and AE Techniques , 2015, Rock Mechanics and Rock Engineering.

[48]  Hani S. Mitri,et al.  Evaluation of fault-slip potential due to shearing of fault asperities1 , 2015 .

[49]  Yang Zou,et al.  Dynamic Brazilian Tests of Granite Under Coupled Static and Dynamic Loads , 2014, Rock Mechanics and Rock Engineering.

[50]  H. Mitri,et al.  Dynamic behaviour of mining-induced fault slip , 2014 .

[51]  Yilan Kang,et al.  Experimental study on damage evolution of rock under uniform and concentrated loading conditions using digital image correlation , 2013 .

[52]  Joseph F Labuz,et al.  Fracture of sandstone characterized by digital image correlation , 2013 .

[53]  C. Martin,et al.  In-situ stress and microcracking in granite cores with depth , 2012 .

[54]  T. Backers,et al.  ISRM Suggested Method for the Determination of Mode II Fracture Toughness , 2012, Rock Mechanics and Rock Engineering.

[55]  Xibing Li,et al.  Effect of Thermal Treatment on the Dynamic Fracture Toughness of Laurentian Granite , 2012, Rock Mechanics and Rock Engineering.

[56]  Andrea Bizzarri,et al.  Rupture speed and slip velocity: What can we learn from simulated earthquakes? , 2012 .

[57]  Jin Liang,et al.  Large deformation measurement scheme for 3D digital image correlation method , 2012 .

[58]  A. Abdollahi,et al.  Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals , 2012, International Journal of Fracture.

[59]  M. Ayatollahi,et al.  On the use of an anti‐symmetric four‐point bend specimen for mode II fracture experiments , 2011 .

[60]  K. Xia,et al.  A Semi-Circular Bend Technique for Determining Dynamic Fracture Toughness , 2010 .

[61]  Liang Hong,et al.  Innovative testing technique of rock subjected to coupled static and dynamic loads , 2008 .

[62]  H. Awaji,et al.  Combined Mode Fracture Toughness Measurement by the Disk Test , 1978 .

[63]  L. P. Pook,et al.  The effect of crack angle on fracture toughness , 1971 .

[64]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[65]  H. Mitri,et al.  Effect of slip-weakening distance on selected seismic source parameters of mining-induced fault-slip , 2015 .

[66]  Xibing Li,et al.  Suggested Methods for Determining the Dynamic Strength Parameters and Mode-I Fracture Toughness of Rock Materials , 2012 .

[67]  Dennis R. Dolinar,et al.  Pillar strength in underground stone mines in the United States , 2011 .