Analysis of planar multibody systems with revolute joint wear
暂无分享,去创建一个
[1] Ferdinand Freudenstein,et al. Dynamic Analysis of Mechanical Systems With Clearances—Part 1: Formation of Dynamic Model , 1971 .
[2] S. Dubowsky. On Predicting the Dynamic Effects of Clearances in Planar Mechanisms , 1974 .
[3] S. Dubowsky,et al. Design and Analysis of Multilink Flexible Mechanisms With Multiple Clearance Connections , 1977 .
[4] S. Earles,et al. A Determination of Contact-Loss at a Bearing of a Linkage Mechanism , 1977 .
[5] T. Furuhashi,et al. Research on Dynamics of Four-Bar Linkage with Clearances at Turning Pairs : 2nd Report, Analysis of Crank-Lever Mechanism with Clearance at Joint of Crank and Coupler Using Continuous Contact Model , 1978 .
[6] T. Furuhashi,et al. Research on Dynamics of Four-Bar Linkage with Clearances at Turning Pairs : 1st Report, General Theory using Continuous Contact Model , 1978 .
[7] T. Furuhashi,et al. Research on Dynamics of Four-Bar Linkage with Clearances at Turning Pairs : 4th Report, Forces Acting at Joints of Crank-Lever Mechanism , 1978 .
[8] A. Shabana,et al. Dynamic Analysis of Constrained System of Rigid and Flexible Bodies With Intermittent Motion , 1986 .
[9] Parviz E. Nikravesh,et al. Computer-aided analysis of mechanical systems , 1988 .
[10] E. J. Haug,et al. Computer aided kinematics and dynamics of mechanical systems. Vol. 1: basic methods , 1989 .
[11] Hamid M. Lankarani,et al. Continuous contact force models for impact analysis in multibody systems , 1994, Nonlinear Dynamics.
[12] S. Shaw,et al. Chaotic and periodic dynamics of a slider-crank mechanism with slider clearance , 1994 .
[13] S. Andersson,et al. Simulating follower wear in a cam—follower contact , 1994 .
[14] T. Brown,et al. A sliding-distance-coupled finite element formulation for polyethylene wear in total hip arthroplasty. , 1996, Journal of biomechanics.
[15] A. Akay,et al. Dynamic response of a revolute joint with clearance , 1996 .
[16] S. Andersson,et al. Simulation of the mild wear in a cam-follower contact with follower rotation , 1996 .
[17] S. Andersson,et al. Simulation of mild wear in spur gears , 1997 .
[18] Thierry A. Blanchet. The Interaction of Wear and Dynamics of a Simple Mechanism , 1997 .
[19] Priit Põdra,et al. Wear simulation with the Winkler surface model , 1997 .
[20] Peter Ravn,et al. A Continuous Analysis Method for Planar Multibody Systems with Joint Clearance , 1998 .
[21] Priit Põdra,et al. Finite element analysis wear simulation of a conical spinning contact considering surface topography , 1999 .
[22] Sören Andersson,et al. Simulating sliding wear with finite element method , 1999 .
[23] Hamid M. Lankarani,et al. Joint Clearances With Lubricated Long Bearings in Multibody Mechanical Systems , 2000 .
[24] Mona Öqvist,et al. Numerical simulations of mild wear using updated geometry with different step size approaches , 2001 .
[25] S. Andersson,et al. A simplified model for wear prediction in helical gears , 2001 .
[26] W. Gregory Sawyer,et al. Wear predictions for a simple-cam including the coupled evolution of wear and load , 2001 .
[27] S. Andersson,et al. Simulation of wear in gears with flank interference—a mixed FE and analytical approach , 2003 .
[28] Jorge Ambrósio,et al. Revolute joints with clearance in multibody systems , 2004 .
[29] J. Ambrósio,et al. Dynamic Analysis for Planar Multibody Mechanical Systems with Lubricated Joints , 2004 .
[30] Jason E. Action,et al. Wear-Rate Uncertainty Analysis , 2004 .
[31] W. Sawyer,et al. Finite element analysis and experiments of metal/metal wear in oscillatory contacts , 2005 .
[32] Tony L. Schmitz,et al. The Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements , 2005 .
[33] P. Rullkoetter,et al. Finite element simulation of early creep and wear in total hip arthroplasty. , 2005, Journal of biomechanics.
[34] L. J. Yang. A test methodology for the determination of wear coefficient , 2005 .
[35] Benjamin J Fregly,et al. Computational wear prediction of a total knee replacement from in vivo kinematics. , 2005, Journal of biomechanics.
[36] Jorge Ambrósio,et al. A study on dynamics of mechanical systems including joints with clearance and lubrication , 2006 .
[37] P. A. Lakshminarayanan,et al. Predictions of cam follower wear in diesel engines , 2006 .
[38] W. Sawyer,et al. Numerical integration schemes and parallel computation for wear prediction using finite element method , 2009 .
[39] Paulo Flores,et al. Dynamic Analysis Of Mechanical Systems With Imperfect Kinematic Joints , 2011 .