Comparison between point cloud processing techniques

Abstract Photomodelling is an innovative, economical and fast technique based on the same principles of photogrammetry, which leads to the creation of 3-dimensional models starting from the simple acquisition of photographs. The aim of this paper is to define performances and metrological characteristics of this new technique and to understand the full potential offered by point cloud processing software. The analytical comparison considers a structured light 3D scanning system Creaform Go Scan 50 with metrological certification as a reference, in order to verify the accuracy and precision of photomodelling, using a modified function of the ICP algorithm and spatial, volumetric and superficial comparison criteria.

[1]  Roberto Marsili,et al.  Design of an optical measurement system for dynamic testing of electrospindles , 2013 .

[2]  Gianluca Rossi,et al.  Thermoelastic modal stress analyis , 2008 .

[3]  Marco Filippucci.  Nuvole di pixel. La fotomodellazione con software liberi per il rilievo d’architettura. , 2010 .

[4]  Gianluca Rossi,et al.  Measurement on Rotating Mechanical Component by Thermoelasticity , 2005 .

[5]  Roberto Marsili,et al.  Thermoelastic Stress Analysis of the contact between a flat plate and a cylinder , 2014 .

[6]  Jonathan Richard Shewchuk,et al.  Delaunay refinement algorithms for triangular mesh generation , 2002, Comput. Geom..

[7]  M. Moretti,et al.  Comparison between Digital Image Correlation and Thermoelasticity for Strain Field Analysis , 2010 .

[8]  Gianluca Rossi,et al.  Magnetic nondestructive testing of rotor blade tips , 2015 .

[9]  Richard Szeliski,et al.  Computer Vision - Algorithms and Applications , 2011, Texts in Computer Science.

[10]  Gianluca Rossi,et al.  Comparison between two non-contact techniques for art digitalization , 2017 .

[11]  Gianluca Rossi,et al.  Stress and strain measurements by image correlation and Thermoelasticity , 2009 .

[12]  A. Garinei,et al.  Development of a new capacitive matrix for a steering wheel's pressure distribution measurement , 2014 .

[13]  Gabriel Taubin,et al.  The ball-pivoting algorithm for surface reconstruction , 1999, IEEE Transactions on Visualization and Computer Graphics.

[14]  Gianluca Rossi,et al.  Development and experimental characterization of a new non contact sensor for blade tip timing , 2012 .