论文信息 - The effect of heat-treatment on aluminum-based piston alloys

The effect of heat-treatment on aluminum-based piston alloys

Abstract In this study effect of heat-treatment on the mechanical properties of aluminum-based piston alloys has been investigated. AlCu 4 MgNi alloys and AlSiCuMgNi alloys with 10.5%, 12%, 18% and 24% Si were utilized for this purpose. After melting, alloys have been cast in the metal mold at 800 °C and solidified. The solution treatment has been performed at 500 °C for 5 h and then quenched. The samples have been aged at 180 °C for 9 h to observe the effect of aging on hardness properties.

Muzaffer Zeren | M. Zeren

[1] J. Rodriguez-Ibabe,et al. Characterization of the dissolution of the Al2Cu phase in two Al–Si–Cu–Mg casting alloys using calorimetry , 2002 .

[2] K. Nakata,et al. Improvement in wear resistance of hyper-eutectic AlSi cast alloy by laser surface remelting , 2003 .

[3] S. Ringer,et al. Response to comments on cluster hardening in an aged Al-Cu-Mg alloy , 1998 .

[4] Muzaffer Zeren,et al. Effect of copper and silicon content on mechanical properties in Al–Cu–Si–Mg alloys , 2005 .

[5] Fanyou Xie,et al. Microstructure and microsegregation in Al-rich Al–Cu–Mg alloys , 1999 .

[6] D. Eskin,et al. Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys , 2005 .

[7] Y. H. Zhao,et al. Age-hardening behavior of cast Al–Si base alloy , 2004 .

[8] I. Hurtado,et al. Simulation of the evolution of GP zones in Al–Cu alloys: an extended Cahn–Hilliard approach , 2000 .

[9] Sun Yu,et al. Restraining effect of strontium on the crystallization of Mg2Si phase during solidification in Al–Si–Mg casting alloys and mechanisms , 2003 .

[10] M. Haque,et al. Effect of process variables on structure and properties of aluminium–silicon piston alloy , 1998 .

[11] Z. Guo,et al. Quantification of precipitate fraction in Al-Si-Cu alloys , 2005 .