Are short Hi-Nicalon SiC fibers a secondary or a toughening phase for ultra-high temperature ceramics?
暂无分享,去创建一个
[1] Xinghong Zhang,et al. Influence of the microstructure evolution of ZrO2 fiber on the fracture toughness of ZrB2–SiC nanocomposite ceramics , 2013 .
[2] S. Dong,et al. Fabrication and properties of 3-D Cf/ZrB2–ZrC–SiC composites via polymer infiltration and pyrolysis , 2013 .
[3] M. Nygren,et al. Effect of the Sintering Additive on Microstructure and Mechanical Properties of Hi‐NicalonTM SiC Fibers in a HfB2 Matrix , 2013 .
[4] D. Sciti,et al. Effect of different sintering aids on thermo–mechanical properties and oxidation of SiC fibers – Reinforced ZrB2 composites , 2013 .
[5] Motofumi Ohki,et al. Proposal for ISO 14577 : Metallic materials : Instrumented Indentation Test for Hardness and Materials Parameters (Part 1) Test Method (3rd. Influence on Computed Young's Modulus by Different Indenter's Tip Profile and Material Property (小特集 微小部および微小部材の評価技術) , 2012 .
[6] M. Berger. Fine Ceramic Fibers: From Microstructure to High Temperature Mechanical Behavior , 2012 .
[7] Yumin Zhang,et al. Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite , 2012 .
[8] Y. Sakka,et al. Strong ZrB2–SiC–WC Ceramics at 1600°C , 2012 .
[9] Xinghong Zhang,et al. Effects of SiC platelet and ZrSi2 additive on sintering and mechanical properties of ZrB2-based ceramics by hot-pressing , 2012 .
[10] W. Zhi,et al. Microstructure and mechanical properties of hot-pressed ZrB2–SiC–ZrO2f ceramics with different sintering temperatures , 2012 .
[11] V. Medri,et al. Pressureless sintered in situ toughened ZrB2–SiC platelets ceramics , 2011 .
[12] G. Hilmas,et al. Mechanical properties of sintered ZrB2–SiC ceramics , 2011 .
[13] D. Sciti,et al. SiC chopped fibers reinforced ZrB2: Effect of the sintering aid , 2011 .
[14] M. Nygren,et al. Microstructure and Toughening Mechanisms in Spark Plasma-Sintered ZrB2 Ceramics Reinforced by SiC Whiskers or SiC-Chopped Fibers , 2010 .
[15] D. Sciti,et al. Toughened ZrB2-based ceramics through SiC whisker or SiC chopped fiber additions , 2010 .
[16] H. Kleebe,et al. Transmission electron microscopy on Zr- and Hf-borides with MoSi_2 addition: Densification mechanisms , 2010 .
[17] Lai-fei Cheng,et al. Preparation and properties of 2D C/ZrB2-SiC ultra high temperature ceramic composites , 2009 .
[18] J. Zou,et al. Formation of tough interlocking microstructure in ZrB_2—SiC-based ultrahigh-temperature ceramics by pressureless sintering , 2009 .
[19] Jiecai Han,et al. Processing and characterization of ZrB2–SiCW ultra-high temperature ceramics , 2009 .
[20] S. Guo,et al. Mechanical behavior of two-step hot-pressed ZrB2-based composites with ZrSi2 , 2009 .
[21] Jiecai Han,et al. Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics , 2009 .
[22] D. Fang,et al. Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering , 2007 .
[23] William G. Fahrenholtz,et al. Refractory Diborides of Zirconium and Hafnium , 2007 .
[24] D. Sciti,et al. Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques , 2006 .
[25] H. Ichikawa. Advances in SiC Fibers for High Temperature Applications , 2006 .
[26] J. Spain,et al. Designing for ultrahigh-temperature applications: The mechanical and thermal properties of HfB2, HfCx, HfNx and αHf(N) , 2004 .
[27] Donald T. Ellerby,et al. High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .
[28] K. Hirao,et al. Tribological Behavior of a Si3N4/Carbon Short Fiber Composite under Water Lubrication , 2004 .
[29] T. Rouxel,et al. Fracture characteristics of SiC particle reinforced oxynitride glass using chevron-notch three-point bend specimens , 1998 .
[30] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[31] James F. Shackelford,et al. The CRC Materials Science And Engineering Handbook , 1991 .
[32] John W. Hutchinson,et al. Models of fiber debonding and pullout in brittle composites with friction , 1990 .
[33] M. Taya,et al. Toughening of a particulate-reinforced/ceramic-matrix composite. Technical report , 1989 .
[34] Anthony G. Evans,et al. Crack deflection processes—I. Theory , 1983 .
[35] D. Munz,et al. Fracture toughness calculation from maximum load in four point bend tests of chevron notch specimens , 1980 .