Machining of composite materials

Abstract In this chapter, an overview of the main issues concerning drilling of polymer matrix fibrous composite materials is presented. These materials are widely used for parts manufacturing in the aerospace industry due to their high specific mechanical properties and low weight, and require extensive drilling processes, for e.g. joining. A proper optimization of the drilling process can substantially improve parts quality, often affected by diverse faults generated during the process. As several parameters are involved in FRP composites drilling, and complex phenomena occur, which are completely different from metal cutting, such optimization is a challenging task. To examine the relevant issues, the influence of tool geometry and technological parameters on thrust force, torque and tool wear are discussed, as well as their role in delamination. These aspects are illustrated with particular reference to drilling of carbon fiber reinforced polymer (CFRP) composites, which are widely employed in the aerospace industry.

[1]  Dave Kim,et al.  Influence of Consolidation Process on the Drilling Performance and Machinability of PIXA-M and PEEK Thermoplastic Composites , 2005 .

[2]  M. H. Attia,et al.  Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates , 2012 .

[3]  João Manuel R. S. Tavares,et al.  Drilling tool geometry evaluation for reinforced composite laminates , 2010 .

[4]  Francesco Napolitano,et al.  Multiple Sensor Monitoring for Tool Wear Forecast in Drilling of CFRP/CFRP Stacks with Traditional and Innovative Drill Bits , 2018 .

[5]  W. König,et al.  Machining of Fibre Reinforced Plastics , 1985 .

[6]  João Paulo Davim,et al.  Cutting and Machining of Polymer Composites , 2012 .

[7]  H. J. Zhang,et al.  A FORCE PREDICTION MODEL FOR CUTTING UNIDIRECTIONAL FIBRE-REINFORCED PLASTICS , 2001 .

[8]  Dave Kim,et al.  The effect of fiber orientation on tool wear in edge-trimming of carbon fiber reinforced plastics (CFRP) laminates , 2020 .

[9]  J. Paulo Davim,et al.  Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review , 2019, Composites Part A: Applied Science and Manufacturing.

[10]  A. Abrão,et al.  A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates , 2007 .

[11]  Richard E. DeVor,et al.  A Mechanistic Model to Predict the Cutting Force System for Arbitrary Drill Point Geometry , 1998 .

[12]  Friedrich Kuster,et al.  Comparison of conventional drilling and orbital drilling in machining carbon fibre reinforced plastics (CFRP) , 2016 .

[13]  Yiğit Karpat,et al.  Energy Based Investigation of Process Parameters While Drilling Carbon Fiber Reinforced Polymers , 2016 .

[14]  V. H. C. de Albuquerque,et al.  Drilling Damage in Composite Material , 2014, Materials.

[15]  M. H. Hassan,et al.  Drilling of fiber-reinforced composites: An innovative tool design , 2019, Hole-Making and Drilling Technology for Composites.

[16]  Shih-Chieh Lin,et al.  Drilling carbon fiber-reinforced composite material at high speed , 1996 .

[17]  K. Palanikumar,et al.  Turning CFRP Composites with Ceramic tool for Surface Roughness Analysis , 2012 .

[18]  K. Singh,et al.  Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills , 2016 .

[19]  Yiğit Karpat,et al.  A mechanistic approach to investigate drilling of UD-CFRP laminates with PCD drills , 2014 .

[20]  D. C. H. Yang,et al.  Delamination-Free Drilling of Composite Laminates , 1994 .

[21]  Temperature Measurements for the Tool Wear and Hole Quality Assessment During Drilling of CFRP/CFRP Stacks , 2018 .

[22]  H. Hocheng,et al.  The path towards delamination-free drilling of composite materials , 2005 .

[23]  Pedro Reis,et al.  Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments , 2003 .

[24]  Experimental characterization and finite element modeling of critical thrust force in cfrp drilling , 2018 .

[25]  Yusuf Altintas,et al.  Mechanics and dynamics of orbital drilling operations , 2018 .

[26]  G. Caprino,et al.  Cutting Forces in Orthogonal Cutting of Unidirectional GFRP Composites , 1996 .

[27]  Wen-Chou Chen,et al.  Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates , 1997 .

[28]  P. R. Babu,et al.  Effect of damage levels and curing stresses on delamination growth behaviour emanating from circular holes in laminated FRP composites , 2007 .

[29]  Alessandra Caggiano,et al.  Machining of Fibre Reinforced Plastic Composite Materials , 2018, Materials.

[30]  J Paulo Davim,et al.  Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides , 2012 .

[31]  R. Krishnamurthy,et al.  Investigation into the machining of carbon-fibre-reinforced plastics with cemented carbides , 1992 .

[32]  J. Ni,et al.  The effects of thermal distortions on the diameter and cylindricity of dry drilled holes , 2001 .

[33]  A. Milani,et al.  The effect of manufacturing parameters on the surface roughness of glass fibre reinforced polymer moulds , 2017 .

[34]  J. Ståhl,et al.  Experimental investigations into tool wear of drilling CFRP , 2018 .

[35]  Jürgen Fleischer,et al.  Composite materials parts manufacturing , 2018 .

[36]  Liangchi Zhang,et al.  An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics , 2003 .

[37]  Naresh Bhatnagar,et al.  MACHINING STUDIES OF UD-FRP COMPOSITES PART 2: FINITE ELEMENT ANALYSIS , 2005 .

[38]  Hong Hocheng,et al.  Delamination During Drilling in Composite Laminates , 1990 .

[39]  J. L. Curiel-Sosa,et al.  Chip formation in machining of unidirectional carbon fibre reinforced polymer laminates: FEM based assessment , 2019, Procedia CIRP.

[40]  Dave Kim,et al.  Characterization and Effects of Fiber Pull-Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite , 2016, Materials.

[41]  Alessandra Caggiano,et al.  High Performance Cutting of Fibre Reinforced Plastic Composite Materials , 2016 .

[42]  A. Caggiano,et al.  Characterization of a New Dry Drill-Milling Process of Carbon Fibre Reinforced Polymer Laminates , 2018, Materials.

[43]  Alessandra Caggiano,et al.  Image Analysis for CFRP Drilled Hole Quality Assessment , 2017 .

[44]  Emile S. Greenhalgh,et al.  Delamination growth directionality and the subsequent migration processes – The key to damage tolerant design , 2013 .

[45]  Roberto Teti,et al.  Machining of Composite Materials , 2002 .

[46]  R. Krishnamurthy,et al.  Evaluation of PCD tool performance during machining of carbon/phenolic ablative composites , 2000 .