Three-dimensional laser printing of macro-scale glass objects at a micro-scale resolution

Femtosecond laser-induced chemical etching (FLICE) has proved itself a powerful approach when attempting to fabricate three-dimensional (3D) microstructures in glass, whereas maintaining a high spatial resolution in fabricating samples of great heights/thicknesses is challenging due to the diffraction nature of light waves. Here, we demonstrate the fabrication of macro-scale 3D glass objects of large heights up to ~3.8 cm with a well-balanced lateral and longitudinal resolution of ~20 μm using the FLICE. Moreover, a freeform hand printed with embedded blood vessel system has been produced. The remarkable accomplishments are achieved by revealing an unexplored regime in the interaction of ultrafast laser pulses with fused silica, which gives rise to depth-insensitive focusing of the laser pulses and polarization-independent selective etching inside fused silica. We examine the difference in the plasma dynamics between interactions of picosecond and femtosecond laser pulses with fused silica glass.

[1]  C. Grigoropoulos,et al.  Single cell detection using a glass-based optofluidic device fabricated by femtosecond laser pulses. , 2009, Lab on a chip.

[2]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[3]  R. Osellame,et al.  Femtosecond laser microstructuring: an enabling tool for optofluidic lab‐on‐chips , 2011 .

[4]  Koji Sugioka,et al.  Multilayered skyscraper microchips fabricated by hybrid “all-in-one” femtosecond laser processing , 2019, Microsystems & Nanoengineering.

[5]  Y. Shimotsuma,et al.  Self-organized nanogratings in glass irradiated by ultrashort light pulses. , 2003, Physical review letters.

[6]  Gerard Mourou,et al.  Optics at critical intensity: applications to nanomorphing. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[7]  Koji Sugioka,et al.  Femtosecond laser nanostructuring in porous glass with sub-50 nm feature sizes. , 2013, Optics letters.

[8]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.

[9]  Saulius Juodkazis,et al.  Ultrafast laser processing of materials: from science to industry , 2016, Light: Science & Applications.

[10]  Ya Cheng,et al.  High-throughput multi-resolution three dimensional laser printing , 2018, Physica Scripta.

[11]  Yves Bellouard,et al.  Spatio-temporally focused femtosecond laser pulses for nonreciprocal writing in optically transparent materials. , 2010, Optics express.

[12]  A. Couairon,et al.  Femtosecond filamentation in transparent media , 2007 .

[13]  P. Corkum,et al.  Optically produced arrays of planar nanostructures inside fused silica. , 2006, Physical review letters.

[14]  Yves Bellouard,et al.  Three-Dimensional Glass Monolithic Micro-Flexure Fabricated by Femtosecond Laser Exposure and Chemical Etching , 2014, Micromachines.

[15]  Ya Cheng,et al.  Centimeter‐Height 3D Printing with Femtosecond Laser Two‐Photon Polymerization , 2018 .

[16]  Ya Cheng,et al.  Freeform microfluidic networks encapsulated in laser printed three-dimensional macro-scale glass objects. , 2019 .

[17]  Ya Cheng,et al.  Polarization-insensitive space-selective etching in fused silica induced by picosecond laser irradiation , 2018, Applied Surface Science.

[18]  Peter G. Kazansky,et al.  Ultrafast laser direct writing and nanostructuring in transparent materials , 2014 .

[19]  Fang Liu,et al.  Three-Dimensional Laser Printing of Macro-Scale Glass Objects at a Micro-Scale Resolution , 2019, Micromachines.

[20]  Feng Chen,et al.  Optical waveguides in crystalline dielectric materials produced by femtosecond‐laser micromachining , 2014 .

[21]  Koji Sugioka,et al.  Fabrication of microfluidic channels with a circular cross section using spatiotemporally focused femtosecond laser pulses. , 2010, Optics Letters.

[22]  K. Sugioka,et al.  Femtosecond laser three-dimensional micro- and nanofabrication , 2014 .