Tensile static, fatigue and relaxation behaviour of closed cell electret PVDF foams

We present the experimental results related to the mechanical behaviour under tensile static, fatigue and compressive relaxation loading of closed cell PVDF electret foams under different loading ratio conditions. The specimens are statically loaded until 60% of their ultimate displacement, and subsequently subjected to cyclic loading under displacement control. The static tests show a stress–strain behaviour and failure mode similar to the one of other polymeric closed cell materials, such as polymetacrylimide-based foams. The fatigue tests show an evolution of the stiffness degradation over the levels of cycles characterised by three distinct phases. The behaviour of the energy dissipated versus the loading ratios and numbers of cycles applied is discussed in this paper, as well as the comparison between the compressive fatigue behavior recorded on similar classes of foams. The compressive relaxation behaviour shows a two-phase dependence over the loading time, with increasing modulus for higher loading ratios, and absence of an asymptotic modulus for long time exposure.

[1]  Magnus Burman,et al.  Fatigue of foam core sandwich beams—1: undamaged specimens , 1997 .

[2]  Fabrizio Scarpa,et al.  Tensile fatigue of conventional and negative Poisson’s ratio open cell PU foams , 2009 .

[3]  T. Daxner,et al.  Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foams , 2006 .

[4]  M. Haberman,et al.  A differential effective medium model for piezoelectret foams , 2007 .

[5]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[6]  H. Winter,et al.  Compression stress relaxation apparatus for the long-time monitoring of the incremental modulus , 2003 .

[7]  J. R. Royer,et al.  Compressive stress relaxation of metallocene-based polyolefin foams: Effect of gamma-ray-induced crosslinking , 1999 .

[8]  P. A. Brühwiler,et al.  Finite element micromechanics model of impact compression of closed-cell polymer foams , 2009 .

[9]  Fabrizio Scarpa,et al.  Dynamic properties of high structural integrity auxetic open cell foam , 2004 .

[10]  Magnus Burman,et al.  Tension, compression and shear fatigue of a closed cell polymer foam , 2009 .

[11]  Warren P. Mason,et al.  Introduction to polymer viscoelasticity , 1972 .

[12]  Fabrizio Scarpa,et al.  Mechanical behaviour of conventional and negative Poisson’s ratio thermoplastic polyurethane foams under compressive cyclic loading , 2007 .

[13]  F. Scarpa,et al.  Viscoelastic and compression fatigue properties of closed cell PVDF foam , 2010 .

[14]  R. M. Sullivan,et al.  Application of an Elongated Kelvin Model to Space Shuttle Foams , 2008 .

[15]  D. Robert,et al.  Nanomechanical and electrical characterization of a new cellular electret sensor–actuator , 2008, Nanotechnology.

[16]  Gerhard M. Sessler,et al.  Electromechanical response of cellular electret films , 1999 .

[17]  J. Hillenbrand,et al.  Quasistatic and dynamic piezoelectric coefficients of polymer foams and polymer film systems , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  A. Vinogradov,et al.  Dynamic mechanical testing of the creep and relaxation properties of polyvinylidene fluoride , 2000 .

[19]  J. R. Royer,et al.  Generation of microcellular foams of PVDF and its blends using supercritical carbon dioxide in a continuous process , 2002 .

[20]  Joel Fried,et al.  Polymer Science and Technology , 1995 .