High-speed and micro-scale measurements of flow and reaction dynamics for sustainable energy storage

[1]  B. Yi,et al.  Composite Electrode for Unitized Regenerative Proton Exchange Membrane Fuel Cell with Improved Cycle Life , 2004 .

[2]  D. Stolten,et al.  A comprehensive review on PEM water electrolysis , 2013 .

[3]  Xiaoping Ma,et al.  Bifunctional oxygen electrode with corrosion-resistive gas diffusion layer for unitized regenerative fuel cell , 2006 .

[4]  Jingke Mo,et al.  Electrochemical performance modeling of a proton exchange membrane electrolyzer cell for hydrogen energy , 2015 .

[5]  The influence of metal ions on the conductivity of Nafion 112 in polymer electrolyte membrane fuel cell , 2008 .

[6]  D. Jacobson,et al.  Two-phase flow in a proton exchange membrane electrolyzer visualized in situ by simultaneous neutron radiography and optical imaging , 2013 .

[7]  A. P. Fickett,et al.  Hydrogen Generation by Solid Polymer Electrolyte Water Electrolysis , 1975 .

[8]  Feng-Yuan Zhang,et al.  Liquid Water Removal from a Polymer Electrolyte Fuel Cell , 2006 .

[9]  B. Yi,et al.  Electrochemical investigation of electrocatalysts for the oxygen evolution reaction in PEM water electrolyzers , 2008 .

[10]  Jincan Chen,et al.  Evaluation and calculation on the efficiency of a water electrolysis system for hydrogen production , 2010 .

[11]  Suresh G. Advani,et al.  Performance of a metallic gas diffusion layer for PEM fuel cells , 2008 .

[12]  Suresh G. Advani,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering Investigation of a Copper Etching Technique to Fabricate Metallic Gas Diffusion Media , 2022 .

[13]  Y. Zhai,et al.  Investigations on high performance proton exchange membrane water electrolyzer , 2009 .

[14]  S. Grigoriev,et al.  Pure hydrogen production by PEM electrolysis for hydrogen energy , 2006 .

[15]  Heli Wang,et al.  Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates: Part 1. Corrosion, interfacial contact resistance, and surface structure , 2010 .

[16]  F. Barbir.  PEM electrolysis for production of hydrogen from renewable energy sources , 2005 .

[17]  K. Scott,et al.  The effects of ionomer content on PEM water electrolyser membrane electrode assembly performance , 2010 .

[18]  Feng-Yuan Zhang,et al.  Evaluation of nitrided titanium separator plates for proton exchange membrane electrolyzer cells , 2014 .

[19]  Geping Yin,et al.  Effective protonic and electronic conductivity of the catalyst layers in proton exchange membrane fuel cells , 2004 .

[20]  John A. Turner,et al.  Reviewing Metallic PEMFC Bipolar Plates , 2010 .