Investigation on performance of engineered cementitious composites (ECC) based on surface modification of PET fibers using graphene oxide (GO) and polydopamine (PDA)

[1]  M. Shukla,et al.  Effect of Concrete Composition on the Thermodynamic Binding of Dopamine: A DFT Study. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[2]  Bing Yin,et al.  Investigation of composite silane emulsion modified by in-situ functionalized graphene oxide for cement-based materials , 2021 .

[3]  Xin Wang,et al.  Immobilizing reduced graphene oxide on polydopamine-templated PET fabrics for UV protection, electrical conduction and application as wearable sensors , 2020 .

[4]  C. Leung,et al.  Using graphene oxide to strengthen the bond between PE fiber and matrix to improve the strain hardening behavior of SHCC , 2019 .

[5]  C. Leung,et al.  Surface modification of polyethylene fiber by ozonation and its influence on the mechanical properties of Strain-Hardening Cementitious Composites , 2019, Composites Part B: Engineering.

[6]  E. Yang,et al.  Stochastic model of tensile behavior of strain-hardening cementitious composites (SHCCs) , 2019, Cement and Concrete Research.

[7]  Christopher K.Y. Leung,et al.  Recycling polyethylene terephthalate wastes as short fibers in Strain-Hardening Cementitious Composites (SHCC). , 2018, Journal of hazardous materials.

[8]  Constantinos Soutis,et al.  Surface Modification of Aramid Fibres with Graphene Oxide for Interface Improvement in Composites , 2018, Applied Composite Materials.

[9]  C. Leung,et al.  Tensile performance of sustainable Strain-Hardening Cementitious Composites with hybrid PVA and recycled PET fibers , 2018 .

[10]  Dale P Bentz,et al.  Influence of Substrate Moisture State and Roughness on Interface Microstructure and Bond Strength: Slant Shear vs. Pull-Off Testing. , 2018, Cement & concrete composites.

[11]  E. Yang,et al.  Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers , 2017 .

[12]  A. Gu,et al.  A novel strategy of fabricating high performance UV-resistant aramid fibers with simultaneously improved surface activity, thermal and mechanical properties through building polydopamine and graphene oxide bi-layer coatings , 2017 .

[13]  J. Fládr,et al.  Impact of surface plasma treatment on the performance of PET fiber reinforcement in cementitious composites , 2016 .

[14]  M. Latifi,et al.  Study on fiber hybridization effect of engineered cementitious composites with low- and high-modulus polymeric fibers , 2016 .

[15]  M. Jamshidi,et al.  The effect of hybridization and geometry of polypropylene fibers on engineered cementitious composites reinforced by polyvinyl alcohol fibers , 2016 .

[16]  Kwang S. Kim,et al.  Noncovalent Functionalization of Graphene and Graphene Oxide for Energy Materials, Biosensing, Catalytic, and Biomedical Applications. , 2016, Chemical reviews.

[17]  Shunzhi Qian,et al.  Tailoring Engineered Cementitious Composites with local ingredients , 2015 .

[18]  Weiqi Wang,et al.  Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC) , 2015 .

[19]  R. D. T. Filho,et al.  Influence of Local Raw Materials on The Mechanical Behaviour and Fracture Process of PVA-SHCC , 2013 .

[20]  Eduardo Pereira,et al.  Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites , 2012 .

[21]  Shunzhi Qian,et al.  Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence , 2012 .

[22]  Jong-Pil Won,et al.  Bonding characteristics of recycled polyethylene terephthalate (PET) fibers coated with maleic anhydride grafted polypropylene in cement‐based composites , 2011 .

[23]  Zhiqiang Gao,et al.  Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization , 2010 .

[24]  V. Li,et al.  Rheological Control in Production of Engineered Cementitious Composites , 2009 .

[25]  H. Karakas.  A comparison between the thermomechanical and structural changes in textured PET yarns after superheated steam and dry heat treatment , 2004 .

[26]  E. Dargent,et al.  Characterization of polyethylene terephthalate films drawn in hot water , 2004 .

[27]  Gregor Fischer,et al.  EFFECT OF MATRIX DUCTILITY ON DEFORMATION BEHAVIOR OF STEEL-REINFORCED ECC FLEXURAL MEMBERS UNDER REVERSED CYCLIC LOADING CONDITIONS , 2002 .

[28]  Tadashi Saito,et al.  Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC) , 2002 .

[29]  Tadashi Saito,et al.  Measuring and modifying interface properties of PVA fibers in ECC matrix , 2001 .

[30]  V. Li,et al.  TENSILE STRAIN-HARDENING BEHAVIOR OF POLYVINYL ALCOHOL ENGINEERED CEMENTITIOUS COMPOSITE (PVA-ECC) , 2001 .

[31]  V. Li,et al.  The role of flaw size and fiber distribution on tensile ductility of PVA-ECC , 2014 .

[32]  V. Li.  On Engineered Cementitious Composites (ECC) , 2003 .

[33]  Hwai Chung Wu,et al.  Fiber/cement interface tailoring with plasma treatment , 1999 .