Experimental investigations of heat transfer enhancement by plane and curved winglet type vortex generators with punched holes

Abstract Experiments were carried out to investigate the performance of plane and curved winglet (rectangular, trapezoidal and delta) vortex generators (VGs) with and without punched holes. Effects of hole diameter and positions on the performance of VGs were evaluated using dimensionless numbers – j / j 0 , f / f 0 and R  = ( j / j 0 )/( f / f 0 ). The results showed that curved winglet type VGs (CRWP, CTWP and CDWP) have better heat transfer enhancement and lower flow resistance than corresponding plane winglet VGs in both laminar and turbulent flow regions. CDWP presents the best thermohydraulic performance followed by CTWP ( α  = 20°) covering all flow regions. The punched holes really improve the thermohydraulic performance of VGs and decrease the flow resistance for all cases; but the optimal diameter of the holes needs to be matched with the VG face area, i.e. the smaller the VG face area, the relatively smaller hole diameter is better. The hole punched at lower position in vertical direction and at the centerline of lateral direction presents better heat transfer enhancement and thermohydraulic performance; but hole positions have slight influence on the flow resistance of VGs. The results indicate the advantages of using curved winglet VGs with punched holes in the surface for heat transfer enhancement.

[1]  Wen-Quan Tao,et al.  Numerical study on laminar convection heat transfer in a rectangular channel with longitudinal vortex generator. Part A: Verification of field synergy principle , 2008 .

[2]  Patrice Tochon,et al.  Intensification of heat-transfer and mixing in multifunctional heat exchangers by artificially generated streamwise vorticity , 2006 .

[3]  Ya-Ling He,et al.  A comparative study on the air-side performance of wavy fin-and-tube heat exchanger with punched delta winglets in staggered and in-line arrangements , 2009 .

[4]  Koichi Nishino,et al.  Numerical and experimental determination of flow structure and heat transfer effects of longitudinal vortices in a channel flow , 1996 .

[5]  Jiansheng Wang,et al.  MECHANISM OF HEAT TRANSFER ENHANCEMENT OF SEMI-ELLIPSE VORTEX GENERATOR , 2006 .

[6]  Guobing Zhou,et al.  Experimental investigations of thermal and flow characteristics of curved trapezoidal winglet type vortex generators , 2012 .

[7]  Xiangfei Kong,et al.  Experimental study of rectangular channel with modified rectangular longitudinal vortex generators , 2010 .

[8]  P. Wibulswas.  Laminar-flow heat-transfer in non-circular ducts. , 1966 .

[9]  Gautam Biswas,et al.  Heat transfer in a channel with built-in wing-type vortex generators , 1992 .

[10]  Rui Li,et al.  Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators , 2009 .

[11]  Wen-Quan Tao,et al.  The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer , 2005 .

[12]  Xie Fei.  THE SIMULATION OF THE AIRSHIP FLOW FIELD WITH INJECTION CHANNEL FOR THE DRAG REDUCTION , 2010 .

[13]  Shiping Jin,et al.  Experimental investigations on liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators , 2011 .

[14]  Yan Lin Wang,et al.  Experimental investigations on single-phase heat transfer enhancement with longitudinal vortices in narrow rectangular channel , 2010 .

[15]  M. Fiebig,et al.  Experimental investigations of heat transfer enhancement and flow losses in a channel with double rows of longitudinal vortex generators , 1993 .

[16]  Martin Fiebig,et al.  Heat transfer enhancement and drag by longitudinal vortex generators in channel flow , 1991 .

[17]  Pongjet Promvonge,et al.  Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet ☆ , 2011 .

[18]  Dominique Della Valle,et al.  Enhancing heat transfer in vortex generator-type multifunctional heat exchangers , 2012 .

[19]  Anthony M. Jacobi,et al.  Heat transfer enhancement by winglet-type vortex generator arrays in compact plain-fin-and-tube heat exchangers , 2008 .

[20]  M. Fiebig.  Embedded vortices in internal flow: heat transfer and pressure loss enhancement , 1995 .

[21]  M. Fiebig,et al.  Heat transfer enhancement of a finned oval tube with punched longitudinal vortex generators in-line , 1998 .

[22]  Koichi Nishino,et al.  Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers. , 2002 .