Incompressible Newtonian laminar flows

[1]  Dominique Pelletier,et al.  Adaptative remeshing for viscous incompressible flows , 1992 .

[2]  Peter Oswald,et al.  Error estimates and adaptivity , 1994 .

[3]  J. Peraire,et al.  Unstructured grid finite-element methods for fluid mechanics , 1998 .

[4]  K. Morgan,et al.  Petrov-Galerkin solutions of the incompressible Navier-Stokes equations in primitive variables with adaptive remeshing , 1993 .

[5]  P. George,et al.  Delaunay mesh generation governed by metric specifications. Part I algorithms , 1997 .

[6]  Pierre Saramito,et al.  An adaptive finite element method for viscoplastic fluid flows in pipes , 2001 .

[7]  Waldemar Rachowicz,et al.  An anisotropic h-type mesh-refinement strategy , 1993 .

[8]  William H. Frey,et al.  An apporach to automatic three‐dimensional finite element mesh generation , 1985 .

[9]  T. H. Tsang,et al.  Transient solutions for three‐dimensional lid‐driven cavity flows by a least‐squares finite element method , 1995 .

[10]  O. C. Zienkiewicz,et al.  Adaptive mesh generation for fluid mechanics problems , 2000 .

[11]  J. Peiro,et al.  Adaptive remeshing for three-dimensional compressible flow computations , 1992 .

[12]  J. Oden,et al.  An a posteriori error estimate for finite element approximations of the Navier-Stokes equations , 1994 .

[13]  N. Weatherill.  Mesh generation for aerospace applications , 1991 .

[14]  P. Moin,et al.  Application of a Fractional-Step Method to Incompressible Navier-Stokes Equations , 1984 .

[15]  B. Palermio.  A two-dimensional FEM adaptive moving-node method for steady Euler flow simulations , 1988 .

[16]  O. C. Zienkiewicz,et al.  A penalty function approach to problems of plastic flow of metals with large surface deformations , 1975 .

[17]  Nigel P. Weatherill,et al.  Adaptivity for compressible flow computations using point embedding on 2-D structured multiblock meshes , 1991 .

[18]  U. Ghia,et al.  High-Re solutions for incompressible flow using the Navier-Stokes equations and a multigrid method , 1982 .

[19]  Kincho H. Law,et al.  A distributed implementation of an adaptive finite element method for fluid problems , 2000 .

[20]  O. C. Zienkiewicz,et al.  Error estimates and convergence rates for various incompressible elements , 1989 .

[21]  Nigel P. Weatherill,et al.  Adaptivity techniques for compressible inviscid flows , 1993 .

[22]  O. C. Zienkiewicz,et al.  The Finite Element Method: Its Basis and Fundamentals , 2005 .

[23]  O. C. Zienkiewicz,et al.  Error estimation and adaptivity in Navier-Stokes incompressible flows , 1990 .

[24]  Philippe R.B. Devloo,et al.  Adaptive finite element methods for the analysis of inviscid compressible flow: Part I. Fast refinement/unrefinement and moving mesh methods for unstructured meshes , 1986 .

[25]  Jaime Peraire,et al.  An adaptive finite element method for transient compressible flows with moving boundaries , 1991 .

[26]  Michel Fortin,et al.  A directionally adaptive methodology using an edge-based error estimate on quadrilateral grids , 1996 .

[27]  Rainald Löhner,et al.  Adaptive h‐refinement on 3D unstructured grids for transient problems , 1992 .

[28]  Frédéric Hecht,et al.  MESH GRADATION CONTROL , 1998 .

[29]  Nigel P. Weatherill,et al.  The adaptation of unstructured grids for transonic viscous flow simulation , 1997 .

[30]  N. Weatherill,et al.  Efficient three‐dimensional Delaunay triangulation with automatic point creation and imposed boundary constraints , 1994 .

[31]  Nigel P. Weatherill,et al.  Compressible flowfield solutions with unstructured grids generated by Delaunay triangulation , 1995 .

[32]  M. Shephard,et al.  A combined octree/delaunay method for fully automatic 3‐D mesh generation , 1990 .

[33]  P. Nithiarasu.  An efficient artificial compressibility (AC) scheme based on the characteristic based split (CBS) method for incompressible flows , 2003 .

[34]  J. T. Oden,et al.  An hp adaptive strategy for finite element approximations of the Navier‐Stokes equations , 1995 .

[35]  Rainald Löhner,et al.  Mesh adaptation in fluid mechanics , 1995 .

[36]  V. V. S. Raveendra,et al.  Robust boundary triangulation and delaunay triangulation of arbitrary planar domains , 1994 .

[37]  O C Zlenkiewicz.  ADAPTIVITY-FLUIDS-LOCALIZATION: THE CHALLENGE TO COMPUTATIONAL MECHANICS , 1991 .

[38]  Rainald Löhner,et al.  Adaptive remeshing for transient problems , 1989 .

[39]  Nigel P. Weatherill,et al.  Two-dimensional Navier-Stokes equations with adaptivity on structured meshes , 1992 .

[40]  J. T. Oden,et al.  Adaptive finite element methods for high‐speed compressible flows , 1987 .

[41]  O. C. Zienkiewicz,et al.  Convection dominated problems , 1986 .

[42]  O. C. Zienkiewicz,et al.  Adaptive grid refinement for the Euler and compressible Navier-Stokes equations , 1984 .

[43]  P. George,et al.  Delaunay mesh generation governed by metric specifications. Part II. applications , 1997 .

[44]  Jaime Peraire,et al.  An adaptive finite element method for transient compressible flows , 1991 .

[45]  Nigel P. Weatherill,et al.  A PARALLEL FRAMEWORK FOR MULTIDISCIPLINARY AEROSPACE ENGINEERING SIMULATIONS USING UNSTRUCTURED MESHES , 1999 .

[46]  Kenneth Morgan,et al.  Unstructured mesh generation including directional refinement for aerodynamic flow simulation , 1997 .

[47]  Perumal Nithiarasu.  An adaptive remeshing technique for laminar natural convection problems , 2002 .

[48]  Chunfeng Zhou,et al.  Phase-field simulations of interfacial dynamics in viscoelastic fluids using finite elements with adaptive meshing , 2006, J. Comput. Phys..

[49]  R. L. Sani,et al.  Consistent vs. reduced integration penalty methods for incompressible media using several old and new elements , 1982 .

[50]  Roland W. Lewis,et al.  Aspects of adaptive mesh generation based on domain decomposition and Delaunay triangulation , 1995 .

[51]  M. Fortin.  Old and new finite elements for incompressible flows , 1981 .

[52]  M. Picasso,et al.  Adaptive Finite Elements with High Aspect Ratio for Dendritic Growth of a Binary Alloy Including Fluid Flow Induced by Shrinkage , 2007 .

[53]  Ramon Codina,et al.  A general algorithm for compressible and incompressible flows. Part III: The semi‐implicit form , 1998 .

[54]  Serge Prudhomme,et al.  A posteriori error estimation of steady-state finite element solutions of the Navier—Stokes equations by a subdomain residual method , 1998 .

[55]  J. Oden,et al.  Toward a universal h - p adaptive finite element strategy: Part 2 , 1989 .

[56]  J. Peraire,et al.  UNSTRUCTURED TETRAHEDRAL MESH GENERATION FOR THREE-DIMENSIONAL VISCOUS FLOWS , 1996 .

[57]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[58]  J. Peraire,et al.  Mesh generation and adaptivity for the solution of compressible viscous high speed flows , 1995 .

[59]  Frédéric Hecht,et al.  Anisotropic adaptive mesh generation in two dimensions for CFD , 1996 .

[60]  H. Borouchaki,et al.  Adaptive triangular–quadrilateral mesh generation , 1998 .

[61]  B. G. Larwood,et al.  Towards fully parallel aerospace simulations on unstructured meshes , 2001 .

[62]  C. B. Wilson,et al.  Numerical modelling of wind flow over buildings in two dimensions , 1984 .

[63]  O. C. Zienkiewicz,et al.  ITERATIVE METHOD FOR CONSTRAINED AND MIXED APPROXIMATION. AN INEXPENSIVE IMPROVEMENT OF F.E.M. PERFORMANCE , 1985 .

[64]  Perumal Nithiarasu,et al.  An adaptive finite element procedure for solidification problems , 2000 .

[65]  Leszek Demkowicz,et al.  Toward a universal h-p adaptive finite element strategy , 1989 .

[66]  J. Derby,et al.  Parallel finite element calculation of flow in a three-dimensional lid-driven cavity using the CM-5 and T3D , 1997 .

[67]  Dominique Pelletier,et al.  Fast, Adaptive Finite Element Scheme for Viscous Incompressible Flows , 1992 .

[68]  N. Massarotti,et al.  Forced convection heat transfer from solder balls on a printed circuit board using the characteristic based split (CBS) scheme , 2005 .

[69]  Paul-Louis George,et al.  ASPECTS OF 2-D DELAUNAY MESH GENERATION , 1997 .

[70]  S. Cheng,et al.  Numerical Solution of a Uniform Flow over a Sphere at Intermediate Reynolds Numbers , 1969 .

[71]  O. C. Zienkiewicz,et al.  Adaptive remeshing for compressible flow computations , 1987 .

[72]  K. Morgan,et al.  Three‐dimensional incompressible flow calculations using the characteristic based split (CBS) scheme , 2004 .

[73]  Robin Sibson,et al.  Computing Dirichlet Tessellations in the Plane , 1978, Comput. J..

[74]  Pierre Saramito,et al.  An adaptive finite element method for Bingham fluid flows around a cylinder , 2003 .

[75]  W. Rachowicz.  An anisotropic h-adaptive finite element method for compressible Navier-Stokes equations , 1997 .

[76]  O. C. Zienkiewicz,et al.  Automatic directional refinement in adaptive analysis of compressible flows , 1994 .

[77]  D. F. Watson.  Computing the n-Dimensional Delaunay Tesselation with Application to Voronoi Polytopes , 1981, Comput. J..

[78]  J. Peiro,et al.  An adaptive finite element method for high speed flows , 1987 .

[79]  A. R. Aslan,et al.  Accurate 3D viscous incompressible flow calculations with the FEM , 1997 .

[80]  O. C. Zienkiewicz,et al.  An adaptive finite element procedure for compressible high speed flows , 1985 .

[81]  M. D. Deshpande,et al.  FLUID MECHANICS IN THE DRIVEN CAVITY , 2000 .

[82]  Kankanhalli N. Seetharamu,et al.  A generalized Delaunay triangulation algorithm with adaptive grid size control , 1997 .

[83]  Jaime Peraire,et al.  Adaptive explicit and implicit finite element methods for transient thermal analysis , 1992 .