Three‐dimensional printing of zirconia scaffolds for load bearing applications: Study of the optimal fabrication conditions
暂无分享,去创建一个
[1] N. Willenbacher,et al. 3D-Printed lightweight ceramics using capillary suspensions with incorporated nanoparticles , 2020 .
[2] G. Franks,et al. Direct ink writing of hierarchical porous alumina‐stabilized emulsions: Rheology and printability , 2020, Journal of the American Ceramic Society.
[3] J. Ferreira,et al. 3D printing vertically: Direct ink writing free-standing pillar arrays , 2020 .
[4] Jin Zhao,et al. Gel‐casting of MgAl 2 O 4 transparent ceramics using a common dispersant , 2019, Journal of the American Ceramic Society.
[5] Li Yang,et al. 3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.
[6] H. Zreiqat,et al. Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone , 2018, Advanced healthcare materials.
[7] Erwin Peng,et al. Ceramic Robocasting: Recent Achievements, Potential, and Future Developments , 2018, Advanced materials.
[8] M. Mozafari,et al. Biocompatibility of alumina‐based biomaterials–A review , 2018, Journal of cellular physiology.
[9] M. Alini,et al. Human primary osteoblast behaviour on microrough zirconia-toughened alumina and on selectively etched microrough zirconia-toughened alumina , 2018 .
[10] J. Adrien,et al. Robocast zirconia-toughened alumina scaffolds: Processing, structural characterisation and interaction with human primary osteoblasts , 2018 .
[11] Nicholas Dunne,et al. Effect of microporosity on scaffolds for bone tissue engineering , 2018, Regenerative biomaterials.
[12] Johannes Maurath,et al. 3D printing of open-porous cellular ceramics with high specific strength , 2017 .
[13] Huiping Shao,et al. 3D gel-printing of zirconia ceramic parts , 2017 .
[14] José M.F. Ferreira,et al. Additive manufacturing of 3D porous alkali-free bioactive glass scaffolds for healthcare applications , 2017, Journal of Materials Science.
[15] K. Zhou,et al. Direct ink writing of zirconia three-dimensional structures , 2017 .
[16] K. Yeung,et al. Bone grafts and biomaterials substitutes for bone defect repair: A review , 2017, Bioactive materials.
[17] M. Leu,et al. Additive manufacturing and mechanical characterization of high density fully stabilized zirconia , 2017 .
[18] J. Ferreira,et al. Fabrication of ceramic microneedles – The role of specific interactions between processing additives and the surface of oxide particles in Epoxy Gel Casting , 2016 .
[19] E. Tervoort,et al. 3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics , 2016, Advanced materials.
[20] Lei Jin,et al. In vitro cell proliferation evaluation of porous nano-zirconia scaffolds with different porosity for bone tissue engineering , 2015, Biomedical materials.
[21] M. Moatamedi,et al. Finite element analysis of human femur bone , 2015 .
[22] Bo Li,et al. Direct write printing of three-dimensional ZrO2 biological scaffolds , 2015 .
[23] C. Vieira,et al. Performance of Glutamate Dehydrogenase and Triose Phosphate Isomerase Genes in the Analysis of Genotypic Variability of Isolates of Giardia duodenalis from Livestocks , 2013, BioMed research international.
[24] J. Bates,et al. Stem cells and cell therapies in lung biology and diseases: conference report. , 2013, Annals of the American Thoracic Society.
[25] Teja Guda,et al. Development of Composite Scaffolds for Load-Bearing Segmental Bone Defects , 2013, BioMed research international.
[26] José M.F. Ferreira,et al. A simple recipe for direct writing complex 45S5 Bioglass® 3D scaffolds , 2013 .
[27] H. Engqvist,et al. Bone response to free-form fabricated hydroxyapatite and zirconia scaffolds: a transmission electron microscopy study in the human maxilla. , 2012, Clinical implant dentistry and related research.
[28] Eduardo Saiz,et al. Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration. , 2011, Acta biomaterialia.
[29] Rozalia Dimitriou,et al. Bone regeneration: current concepts and future directions , 2011, BMC medicine.
[30] Sreeram V Ramagopalan,et al. Risk of venous thromboembolism in people admitted to hospital with selected immune-mediated diseases: record-linkage study , 2011, BMC medicine.
[31] J. Hausselt,et al. Influence of dispersant, storage time and temperature on the rheological properties of zirconia–paraffin feedstocks for LPIM , 2010 .
[32] S. P. Rao,et al. Dispersion studies of sub-micron zirconia using Dolapix CE 64 , 2007 .
[33] Yoshito Ikada,et al. Challenges in tissue engineering , 2006, Journal of The Royal Society Interface.
[34] J. Lewis,et al. Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds. , 2005, Biomaterials.
[35] K. Uematsu,et al. Adsorption Effects on the Rheological Properties of Aqueous Alumina Suspensions with Polyelectrolyte , 2005 .
[36] Y. Fukuda,et al. Effect of Polymer Dispersant Structure on Electrosteric Interaction and Dense Alumina Suspension Behavior , 2004 .
[37] J. Lewis. Colloidal Processing of Ceramics , 2004 .
[38] Joseph Cesarano,et al. Colloidal inks for directed assembly of 3-D periodic structures , 2002 .
[39] J. Lewis,et al. Direct-write assembly of ceramics from colloidal inks , 2002 .
[40] Cato T. Laurencin,et al. Bone-Graft Substitutes: Facts, Fictions, and Applications , 2001, The Journal of bone and joint surgery. American volume.
[41] R. Greenwood,et al. Selection of Suitable Dispersants for Aqueous Suspensions of Zirconia and Titania Powders using Acoustophoresis , 1999 .
[42] O. Lyckfeldt,et al. Influence of the stabilising mechanism and solid loading on slip casting of alumina , 1998 .
[43] D. Rowe,et al. Complications associated with harvesting autogenous iliac bone graft. , 1995, American journal of orthopedics.
[44] S. Mindess. Relation Between the Compressive Strength and Porosity of Autoclaved Calcium Silicate Hydrates , 1970 .
[45] R. Thomlinson. Population dynamics: Causes and consequences of world demographic change , 1965 .
[46] M. M. Cross. Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems , 1965 .
[47] A. W. Sisko. The Flow of Lubricating Greases , 1958 .
[48] José M.F. Ferreira,et al. Biphasic calcium phosphate scaffolds fabricated by direct write assembly: Mechanical, anti-microbial and osteoblastic properties , 2017 .
[49] Erwin Peng,et al. Robocasting of dense yttria-stabilized zirconia structures , 2017, Journal of Materials Science.
[50] K. C. Nithin Kumar,et al. Biomechanical Stress Analysis of a Human Femur Bone Using ANSYS , 2015 .
[51] José M.F. Ferreira,et al. Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering , 2014 .
[52] K. Joshi,et al. 1 – Bone disease , 2008 .
[53] J. Seiler,et al. Iliac crest autogenous bone grafting: donor site complications. , 2000, Journal of the Southern Orthopaedic Association.
[54] S. Boden,et al. Bone substitutes for lumbar fusion:present and future , 1997 .
[55] I. Krieger,et al. Rheology of monodisperse latices , 1972 .