Microstructure and physical characterization of alumina-sintered body via hot isostatic pressing

[1]  Debasish Sarkar,et al.  Ceramic Processing , 2019 .

[2]  Z. Harun,et al.  Characterization and performance of porous photocatalytic ceramic membranes coated with TiO2 via different dip-coating routes , 2018, Journal of Materials Science.

[3]  David W. Richerson,et al.  Modern ceramic engineering: Properties, processing and use in design , 2018 .

[4]  Z. Harun,et al.  A comparative study of double layers Al2O3/Al2O3 and Al2O3/SiO2 prepared by microwave and natural drying , 2012 .

[5]  Cheng Liu,et al.  Densification and mechanical properties of fine-grained Al2O3–ZrO2 composites consolidated by spark plasma sintering , 2012 .

[6]  D. Gethin,et al.  Drying (Consolidation) Porous Ceramic by Considering the Microscopic Pore Temperature Gradient , 2011 .

[7]  H. Riedel,et al.  Effect of Different Particle Size Distributions on Solid‐State Sintering: A Microscopic Simulation Approach , 2009 .

[8]  L. Lim,et al.  Effect of particle size distribution on sintering of agglomerate-free submicron alumina powder compacts , 2002 .

[9]  T. Fang,et al.  Effects of milling and particle size distribution on the sintering behavior and the evolution of the microstructure in sintering powder compacts , 1998 .

[10]  A. Bellosi,et al.  Fabrication and characterisation of Al2O3 porous bodies by hot isostatic pressing , 1997 .

[11]  A. Jinka.  A finite-element prediction of densification kinetics during the hot isostatic pressing of metal powder compacts , 1996 .

[12]  S. Okada,et al.  Mechanically Enhanced Open Porous Materials by a HIP Process , 1990 .

[13]  M. Sacks,et al.  Effect of Particle Size Distribution on the Sintering of Alumina , 1988 .

[14]  J. S. Reed,et al.  Introduction to the Principles of Ceramic Processing , 1988 .

[15]  R. M. Cannon,et al.  Effect of grain size distribution on sintered density , 1983 .

[16]  T. Miri,et al.  A New Method for Preparation of Cellular Ceramics by Gelcasting Approach , 2012 .

[17]  B. Smuk,et al.  Properties of alumina ceramics obtained by conventional and non-conventional methods for sintering ceramics , 2011 .

[18]  M. Stodolny,et al.  Hydrothermal Stability of Mesoporous SBA-15 Modified with Alumina and Titania , 2011 .

[19]  H. Rahman,et al.  A comparative study of green alumina foams prepared by microwave and conventional drying , 2009 .

[20]  H. Rahman,et al.  Microwave drying effects on the properties of alumina-zeolite foam , 2009 .

[21]  J. Ranogajec,et al.  Influence of particle size and furnace atmosphere on the sintering of powder for tiles production , 2000 .

[22]  P. Auerkari.  Mechanical and physical properties of engineering alumina ceramics , 1996 .