An Ecodesign approach for the lightweight engineering of cast iron parts

[1]  Michele Germani,et al.  Development of complex products and production strategies using a multi-objective conceptual design approach , 2018 .

[2]  S. Cecchel,et al.  Lightweighting in light commercial vehicles: cradle-to-grave life cycle assessment of a safety-relevant component , 2018, The International Journal of Life Cycle Assessment.

[3]  Francisco Silva,et al.  Designing a new sustainable approach to the change for lightweight materials in structural components used in truck industry , 2017 .

[4]  A. Macioł.  Knowledge-based methods for cost estimation of metal casts , 2017 .

[5]  Marco Pierini,et al.  The effect of lightweighting in automotive LCA perspective: Estimation of mass-induced fuel consumption reduction for gasoline turbocharged vehicles , 2017 .

[6]  M. Cova,et al.  Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour , 2017 .

[7]  P. Rousseaux,et al.  “Eco-tool-seeker”: A new and unique business guide for choosing ecodesign tools , 2017 .

[8]  Enrico Vezzetti,et al.  New product development (NPD) of ‘family business’ dealing in the luxury industry: evaluating maturity stage for implementing a PLM solution , 2017 .

[9]  Massimo Delogu,et al.  Sustainable Design: An Integrated Approach for Lightweighting Components in the Automotive Sector , 2017 .

[10]  Jozef Mitterpach,et al.  Environmental evaluation of grey cast iron via life cycle assessment , 2017 .

[11]  Enrico Vezzetti,et al.  Kano qualitative vs quantitative approaches: An assessment framework for products attributes analysis , 2017, Comput. Ind..

[12]  Mark A. J. Huijbregts,et al.  ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level , 2016, The International Journal of Life Cycle Assessment.

[13]  Per Wennhage,et al.  Life-cycle energy optimisation : A proposed methodology for integrating environmental considerations early in the vehicle engineering design process , 2016 .

[14]  S. M. Sapuan,et al.  Environmentally conscious hybrid bio-composite material selection for automotive anti-roll bar , 2016, The International Journal of Advanced Manufacturing Technology.

[15]  Annick Anctil,et al.  LCA as a decision support tool for evaluation of best available techniques (BATs) for cleaner production of iron casting , 2015 .

[16]  Lluís Corominas,et al.  Life cycle assessment of urban wastewater systems: Quantifying the relative contribution of sewer systems. , 2015, Water research.

[17]  Sujit Das,et al.  Life cycle energy and environmental evaluation of downsized vs. lightweight material automotive engines , 2014 .

[18]  A. Fedoryszyn,et al.  Characteristic of Core Manufacturing Process with Use of Sand, Bonded by Ecological Friendly Nonorganic Binders , 2013 .

[19]  Dorota Burchart-Korol,et al.  Life cycle assessment of steel production in Poland: a case study , 2013 .

[20]  Jihong Zhu,et al.  Structural design of aircraft skin stretch-forming die using topology optimization , 2013, J. Comput. Appl. Math..

[21]  C. Mabru,et al.  Fatigue analysis-based numerical design of stamping tools made of cast iron , 2013 .

[22]  A. Fedoryszyn,et al.  Comparative Analysis of Environmental Impacts of Selected Products , 2013 .

[23]  J. Lacaze,et al.  Critical Temperature Range in Standard and Ni-bearing Spheroidal Graphite Cast Irons , 2012 .

[24]  Mohammed A. Omar,et al.  Sustainable lightweight vehicle design: a case study of eco-material selection for body-in-white , 2012 .

[25]  Laine Mears,et al.  Life-Cycle Integration of Titanium Alloys into the Automotive Segment for Vehicle Light-Weighting: Part I - Component Redesign, Prototyping, and Validation , 2012 .

[26]  Azmi Osman,et al.  Design Concept and Manufacturing Method of a Lightweight Deep Skirt Cylinder Block , 2012 .

[27]  Thomas Kurfess,et al.  Life-Cycle Integration of Titanium Alloys into the Automotive Segment for Vehicle Light-Weighting: Part II - Component Life-Cycle Modeling and Cost Justification , 2012 .

[28]  Mohammed A. Omar,et al.  Life cycle assessment-based selection for a sustainable lightweight body-in-white design , 2012 .

[29]  Xunmin Ou,et al.  Life-cycle analysis on energy consumption and GHG emission intensities of alternative vehicle fuels in China , 2012 .

[30]  Francisco J. Campa,et al.  An integrated process–machine approach for designing productive and lightweight milling machines , 2011 .

[31]  Tone Lerher,et al.  Numerical analysis of railway brake disc , 2011 .

[32]  Lama El Hatow,et al.  Reinforcement of thermoplastic rejects in the production of manhole covers , 2009 .

[33]  Paul Knight,et al.  Adopting and applying eco-design techniques: a practitioners perspective , 2009 .

[34]  Hwai-En Tseng,et al.  Modular design to support green life-cycle engineering , 2008, Expert Syst. Appl..

[35]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[36]  Jahau Lewis Chen,et al.  The conflict-problem-solving CAD software integrating TRIZ into eco-innovation , 2004 .

[37]  M. Gagné,et al.  Production and properties of thin-wall ductile iron castings , 2003 .

[38]  Wulf-Peter Schmidt,et al.  Iterative screening LCA in an eco-design tool , 1997 .

[39]  Jiahai Yuan,et al.  China’s energy revolution strategy into 2030 , 2018 .

[40]  Michael Vielhaber,et al.  Sustainable Lightweight Design – Relevance and Impact on the Product Development & Lifecycle Process , 2017 .

[41]  Michele Germani,et al.  A Design Methodology to Support the Optimization of Steel Structures , 2016 .

[42]  Michele Germani,et al.  PLANTLCA: A Lifecycle Approach to Map and Characterize Resource Consumptions and Environmental Impacts of Manufacturing Plants , 2016 .

[43]  S. Tankersley.  ALLOYING OF THIN-WALL DUCTILE IRON CASTINGS , 2016 .

[44]  Nabil Anwer,et al.  From reverse engineering to shape engineering in mechanical design , 2016 .

[45]  S. Yi,et al.  Life Cycle Assessment of Sewer System: Comparison of Pipe Materials , 2012 .

[46]  Niki Bey,et al.  PARAMETRIC ECODESIGN – AN INTEGRATIVE APPROACH FOR IMPLEMENTING ECODESIGN INTO DECISIVE EARLY DESIGN STAGES , 2008 .

[47]  Zissis Samaras,et al.  Waste from road transport: development of a model to predict waste from end-of-life and operation phases of road vehicles in Europe , 2007 .

[48]  Dominique Millet,et al.  Does the potential of the use of LCA match the design team needs , 2007 .

[49]  H.-J. Warnecke,et al.  Product Redesign Using Value-Oriented Life Cycle Costing , 2005 .