Stacked subwavelength gratings as circular polarization filters.

We have stacked subwavelength gratings (SWGs) on a single substrate to create a compact, integrated circular polarization filter. The SWGs consist of a wire grid polarizer and a broadband form-birefringent quarter-wave plate (QWP). Rigorous coupled-wave analysis was used to design the QWP for operation over the 3.5-5.0-mum wavelength range. The fabricated silicon broadband QWP exhibited a phase retardance of 82-97 degrees across this wavelength range. Two stacked structures are presented, each with a different wire grid polarizer fabricated on an organic planarization layer (SU-8) that is deposited on a QWP grating. Transmittance measurements of the first structure when illuminated with nominally right- and left-circularly polarized light indicate a circular extinction ratio (CER) limited by the low linear extinction ratio of the polarizer. Use of a wire grid polarizer with a higher extinct ratio led to a stacked SWG structure that demonstrated CERs of 10-45 across the 3.5-5.0-mum wavelength range.

[1]  George R. Bird,et al.  The Wire Grid as a Near-Infrared Polarizer , 1960 .

[2]  W Stork,et al.  Artificial distributed-index media fabricated by zero-order gratings. , 1991, Optics letters.

[3]  G. Michael Morris,et al.  Coupled-mode theory of resonant-grating filters , 1997 .

[4]  A. Lopez,et al.  Wave-plate polarizing beam splitter based on a form-birefringent multilayer grating. , 1998, Optics letters.

[5]  E. Gogolides,et al.  Highly anisotropic silicon reactive ion etching for nanofabrication using mixtures of SF6/CHF3 gases , 1997 .

[6]  Thomas K. Gaylord,et al.  Stable implementation of the rigorous coupled-wave analysis for surface-relief gratings: enhanced transmittance matrix approach , 1995 .

[7]  Russell A. Chipman,et al.  Infrared Spectropolarimetry , 1990, Optics & Photonics.

[8]  S. K. Case,et al.  Optical elements with ultrahigh spatial-frequency surface corrugations. , 1983, Applied optics.

[9]  Drew A. Pommet,et al.  Optimal design for antireflective tapered two-dimensional subwavelength grating structures , 1995 .

[10]  G. M. Morris,et al.  Antireflection structured surfaces for the infrared spectral region. , 1993, Applied optics.

[11]  Mial E. Warren,et al.  Subwavelength, binary lenses at infrared wavelengths , 1997 .

[12]  Application of amorphous silicon subwavelength gratings in polarization switching vertical-cavity surface-emitting lasers , 1997 .

[13]  G. Nordin,et al.  Broadband form birefringent quarter-wave plate for the mid-infrared wavelength region. , 1999, Optics express.

[14]  D. Flanders.  Submicrometer periodicity gratings as artificial anisotropic dielectrics , 1983 .

[15]  Gregory P. Nordin,et al.  Diffractive optical element for Stokes vector measurement with a focal plane array , 1999, Optics + Photonics.

[16]  R. Magnusson,et al.  New principle for optical filters , 1992 .

[17]  G. Nordin,et al.  Micropolarizer Array for Infrared Imaging Polarimetry , 1999 .

[18]  H. Kikuta,et al.  Achromatic quarter-wave plates using the dispersion of form birefringence. , 1997, Applied optics.