Temperature Dependence of Elastic Properties of Al-Mg-Si Direct-Chill-Cast AA6111 Alloy at Near-Solidus Temperatures

[1]  D. Larouche,et al.  Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys , 2022, Journal of Materials Science.

[2]  Yan Peng,et al.  The asymmetric pre-yielding behaviour during tension and compression for a rolled AZ31 Mg alloy , 2022, International Journal of Material Forming.

[3]  L. Katgerman,et al.  Modelling of defects in aluminium cast products , 2021 .

[4]  L. Yu,et al.  Overview of High-temperature Deformation Measurement Using Digital Image Correlation , 2021, Experimental Mechanics.

[5]  D. Larouche,et al.  A New Approach to Determine Tensile Stress-Strain Evolution in Semi-Solid State at Near-Solidus Temperature of Aluminum Alloys , 2021 .

[6]  D. Miracle,et al.  Generalization of intrinsic ductile-to-brittle criteria by Pugh and Pettifor for materials with a cubic crystal structure , 2021, Scientific Reports.

[7]  R. Christensen.  The ductile/brittle transition, is it well posed and determinable , 2021 .

[8]  Y. Kimura,et al.  Heterogeneous Distribution of Microstrain Evolved During Tensile Deformation of Polycrystalline Plain Low Carbon Steel , 2020, Metals.

[9]  Ma Quanjin,et al.  Experimental investigation of the tensile test using digital image correlation (DIC) method , 2020 .

[10]  S. Firstov,et al.  Universal temperature dependence of Young’s modulus , 2019, Metal Powder Report.

[11]  Shih-Jeh Wu,et al.  Measurement of Elastic Properties of Brittle Materials by Ultrasonic and Indentation Methods , 2019, Applied Sciences.

[12]  C. F. Niordson,et al.  An investigation of back stress formulations under cyclic loading , 2019 .

[13]  Christoph Hartmann,et al.  Investigation on strain dependent elastic behavior for accurate springback analysis , 2018, Journal of Physics: Conference Series.

[14]  W. Clegg,et al.  Predicting whether a material is ductile or brittle , 2018, Current Opinion in Solid State and Materials Science.

[15]  L. Dávila,et al.  Size dependence of elastic mechanical properties of nanocrystalline aluminum , 2017 .

[16]  Behrad Koohbor,et al.  Experimental determination of Representative Volume Element (RVE) size in woven composites , 2017 .

[17]  F. Barlat,et al.  Effect of nonlinear multi-axial elasticity and anisotropic plasticity on quasi-static dent properties of automotive steel sheets , 2016 .

[18]  L. Katgerman,et al.  A modified hot tearing criterion for direct chill casting of aluminium alloys , 2016 .

[19]  J. Sietsma,et al.  A physically based yield criterion I. Determination of the yield stress based on analysis of pre-yield dislocation behaviour , 2016 .

[20]  F. Yuan,et al.  Back stress strengthening and strain hardening in gradient structure , 2016 .

[21]  R. H. Wagoner,et al.  Variation and consistency of Young’s modulus in steel , 2016 .

[22]  X. Gómez,et al.  Elastic behaviour characterisation of TRIP 700 steel by means of loading–unloading tests , 2015 .

[23]  John S. Wettlaufer,et al.  Stiffening solids with liquid inclusions , 2014, Nature Physics.

[24]  F. Canestrari,et al.  Complex Poisson’s ratio of bituminous mixtures: measurement and modeling , 2014 .

[25]  P. Grant,et al.  Fe Bearing Intermetallic Phase Formation in a Wrought Al–Mg–Si Alloy , 2012, Transactions of the Indian Institute of Metals.

[26]  R. Lakes,et al.  Poisson's ratio and modern materials , 2011, Nature Materials.

[27]  B. Pan.  Recent Progress in Digital Image Correlation , 2011 .

[28]  M. Easton,et al.  The Effect of Iron Content on the Iron-Containing Intermetallic Phases in a Cast 6060 Aluminum Alloy , 2011 .

[29]  H. Yu,et al.  Variation of elastic modulus during plastic deformation and its influence on springback , 2009 .

[30]  A. Phillion,et al.  Tensile properties of as-cast aluminum alloys AA3104, AA6111 and CA31218 at above solidus temperatures , 2008 .

[31]  D. Larouche.  Computation of solidification paths in multiphase alloys with back-diffusion , 2007 .

[32]  Suyitno,et al.  Hot tearing criteria evaluation for direct-chill casting of an Al-4.5 pct Cu alloy , 2005 .

[33]  J. D. Embury,et al.  Tensile properties and bendability of T4 treated AA6111 aluminum alloys , 2004 .

[34]  A. P. Tarkov,et al.  Poisson's ratio behaviour in various crystalline rocks: application to the study of the Earth's interior , 1982 .

[35]  S. Saimoto,et al.  Microplastic bases for constitutive relations found in tensile testing , 1981 .

[36]  W. Köster,et al.  POISSON'S RATIO FOR METALS AND ALLOYS , 1961 .

[37]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[38]  S. Pugh.  XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals , 1954 .

[39]  J. H. Hollomon,et al.  Problems in Non‐Elastic Deformation of Metals , 1946 .