This paper presents a new microelectromechanical hybrid gyroscope (MHG) with three equilibrium rings. This structure can eliminate the error caused by the double rotation frequency of the driving shaft successfully. The MHG kinematic equations with three equilibrium rings are derived in this paper. Meanwhile, a new digital design and simulation of the MHG closed-loop detection circuit are proposed based on FPGA. The noise interference is weakened by using differential mode signal detection and the resources of FPGA are decreased by the loop diode demodulation in this paper. The cross axis coupling of the decoupled system is about 2.4%. The phase margin is 70deg and the magnitude margin is 22db after correction. The transcient response simulation is tested when the inputs are sinusoidal functions. The bandwidth and scale factors of x-axis and y-axis closed loops are analyzed in the paper. The bandwidth can reach about 70Hz and the scale factors of x-axis and y-axis closed loops are 0.1467V/o/s and -0.1467V/o/s respectively.
[1]
Chen Zhiyong,et al.
Digital Readout System for Micromachined Gyroscope and Analysis for its Demodulation Algorithm
,
2006
.
[2]
Shourong Wang,et al.
Research on a new Microelectromechanical Hybrid Gyroscope
,
2010,
The 2010 IEEE International Conference on Information and Automation.
[3]
Bo Yang,et al.
Research on silicon rotor turned gyroscope
,
2013,
International Conference on Graphic and Image Processing.
[4]
Dapeng Fan,et al.
Bond Graph Modeling and Simulation of Dynamically Tuned Gyroscope
,
2007,
2007 International Conference on Mechatronics and Automation.
[5]
Jang Gyu Lee,et al.
Digital rebalance loop design for a dynamically tuned gyroscope using H2 methodology
,
2002
.
[6]
Chen Zhiyong.
Digital readout system for a micro-machined gyroscope and its demodulation algorithm
,
2004
.