A distinct element method numerical investigation of compaction processes in highly porous cemented granular materials

SUMMARY In this paper, the results of an oedometric numerical test campaign, performed by means of a 3D Discrete Element Code on idealised cemented granular cylindrical specimens, are illustrated. The idealised microstructure taken into account is characterised by the following: (i) rigid grains bonded to one another; (ii) a high void ratio; and (iii) two different families of voids: the micro and the macro-voids. The compaction process developing within the specimens, as well as the localization along tabular zones of pure compressive deformation (compaction banding) that in some cases takes place, are discussed. The influence on the evolution of this peculiar strain localization process of many microstructural/numerical parameters like material porosity, macro-void size, the constitutive relationship adopted for the bonds and the bonddamage rate is analysed. Tests for different values of porosity were run. Below a certain porosity threshold value, the onset of mixed modes of localisation was detected whereas the increase in the macro-void size is observed to favour the onset of instability. Copyright © 2014 John Wiley & Sons, Ltd.

[1]  G. Andriani,et al.  Petrophysical and mechanical properties of soft and porous building rocks used in Apulian monuments (south Italy) , 2010 .

[2]  Emmanuelle Klein,et al.  Mechanical behaviour and failure mode of bentheim sandstone under triaxial compression , 2001 .

[3]  A. Langella,et al.  Genesis of zeolites in the Neapolitan Yellow Tuff: geological, volcanological and mineralogical evidence , 2000 .

[4]  Roberto Nova,et al.  Compaction Bands and Oedometric Testing in Cemented Soils (IWS-ATHENS 2003「地盤力学における予測とシュミレーション手法」特集号) , 2005 .

[5]  T. Wong,et al.  Incremental propagation of discrete compaction bands: Acoustic emission and microstructural observations on circumferentially notched samples of Bentheim , 2003 .

[6]  Li,et al.  Moving least-square reproducing kernel methods (I) Methodology and convergence , 1997 .

[7]  R. Katsman,et al.  Numerical simulation of compaction bands in high-porosity sedimentary rock , 2002 .

[8]  Kathleen A. Issen,et al.  Conditions for compaction bands in porous rock , 2000 .

[9]  William A. Olsson,et al.  Theoretical and experimental investigation of compaction bands in porous rock , 1999 .

[10]  P. Bésuelle.  Compacting and dilating shear bands in porous rock: Theoretical and experimental conditions , 2001 .

[11]  C. Thornton.  NUMERICAL SIMULATIONS OF DEVIATORIC SHEAR DEFORMATION OF GRANULAR MEDIA , 2000 .

[12]  Suksun Horpibulsuk,et al.  Assessment of strength development in cement-admixed high water content clays with Abrams' law as a basis , 2003 .

[13]  Tomofumi Koyama,et al.  Effects of model scale and particle size on micro-mechanical properties and failure processes of rocks—A particle mechanics approach , 2007 .

[14]  T. Wong,et al.  Localized failure modes in a compactant porous rock , 2001 .

[15]  T. S. Nagaraj,et al.  COMPRESSIBILITY BEHAVIOUR OF SOFT CEMENTED SOILS , 1998 .

[16]  K. Kodera.  Solar influence on the spatial structure of the NAO during the winter 1900–1999 , 2003 .

[17]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[18]  J. Lemaitre,et al.  Mécanique des matériaux solides , 1996 .

[19]  T. Hueckel,et al.  Weathering of submerged stressed calcarenites: chemo-mechanical coupling mechanisms , 2013 .

[20]  Emmanuelle Klein,et al.  Compaction localization in porous sandstones: spatial evolution of damage and acoustic emission activity , 2004 .

[21]  R. Castellanza,et al.  Experimental Observations and Modelling of Compaction Bands in Oedometric Tests on High Porosity Rocks , 2009 .

[22]  R. Nova,et al.  DEM analysis of bonded granular geomaterials , 2008 .

[23]  Serge Leroueil,et al.  An efficient technique for generating homogeneous specimens for DEM studies , 2003 .

[24]  Yong Chen,et al.  A discrete element model for the development of compaction localization in granular rock , 2008 .

[25]  D. Potyondy.  Simulating stress corrosion with a bonded-particle model for rock , 2007 .

[26]  I. Vardoulakis,et al.  The thickness of shear bands in granular materials , 1987 .

[27]  R. Nova,et al.  Effects of bond crushing on the settlements of shallow foundations on soft rocks , 2011 .

[28]  Marco Antonellini,et al.  Compaction bands: a structural analog for anti-mode I cracks in aeolian sandstone , 1996 .

[29]  B. G. Neal,et al.  The Effect of Shear and Normal Forces on the Fully Plastic Moment of a Beam of Rectangular Cross Section , 1961 .

[30]  Dennes T. Bergado,et al.  Fundamental Characteristics of Cement-Admixed Clay in Deep Mixing , 2006 .

[31]  Suksun Horpibulsuk,et al.  Compressibility of cement-admixed clays at high water content , 2004 .

[32]  Shaofan Li,et al.  A new approach for calculating strain for particulate media , 2003 .

[33]  David D. Pollard,et al.  Paleo-fluid flow and deformation in the Aztec Sandstone at the Valley of Fire, Nevada—Evidence for the coupling of hydrogeologic, diagenetic, and tectonic processes , 2004 .

[34]  A. Porbaha,et al.  State of the art in deep mixing technology: part I. Basic concepts and overview , 1998 .

[35]  Giovanni B. Crosta,et al.  Modeling the evolution of natural cliffs subject to weathering: 2. Discrete element approach , 2011 .

[36]  John W. Rudnicki,et al.  Conditions for compaction and shear bands in a transversely isotropic material , 2002 .

[37]  J. Rudnicki,et al.  Theory of compaction bands in porous rock , 2001 .

[38]  R. Nova,et al.  A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation , 2003 .

[39]  D. Pollard,et al.  Anticrack inclusion model for compaction bands in sandstone , 2005 .

[40]  Giovanni B. Crosta,et al.  Modeling the evolution of natural cliffs subject to weathering. 1, Limit analysis approach , 2009 .

[41]  David J. Holcomb,et al.  Compaction localization in porous rock , 2000 .

[42]  K. Roscoe.  THE INFLUENCE OF STRAINS IN SOIL MECHANICS , 1970 .

[43]  J. Rice,et al.  CONDITIONS FOR THE LOCALIZATION OF DEFORMATION IN PRESSURE-SENSITIVE DILATANT MATERIALS , 1975 .

[44]  Malcolm D. Bolton,et al.  Compaction bands simulated in Discrete Element Models , 2009 .

[45]  Hehua Zhu,et al.  Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses , 2011 .