Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

[1]  Yang Wang,et al.  Controlling the structure and mechanical properties of porous B4C ceramics with unidirectionally aligned channels using sintering additives , 2020 .

[2]  Ning Hu,et al.  High thermal-conductivity rGO/ZrB2-SiC ceramics consolidated from ZrB2-SiC particles decorated GO hybrid foam with enhanced thermal shock resistance , 2020 .

[3]  W. Han,et al.  Preparation and properties of ZrB2–SiC porous ceramics by spark plasma sintering , 2019, Journal of the Ceramic Society of Japan.

[4]  Ning Wang,et al.  Control of pore structure during freeze casting of porous SiC ceramics by different freezing modes , 2019, Ceramics International.

[5]  Zhengwei Li,et al.  Soldering porous ceramics through ultrasonic-induced capillary action and cavitation , 2019, Ceramics International.

[6]  Zhi-yong Luo,et al.  In-situ reaction bonding to obtain porous SiC membrane supports with excellent mechanical and permeable performance , 2019, Ceramics International.

[7]  Jinlong Yang,et al.  A novel approach to fabricate porous alumina ceramics with excellent properties via pore-forming agent combined with sol impregnation technique , 2018, Ceramics International.

[8]  Haiyan Du,et al.  Influence of fibers on the microstructure and compressive response of directional ice-templated alumina ceramics , 2018, Journal of the European Ceramic Society.

[9]  K. Zhou,et al.  Porous SiC ceramics with dendritic pore structures by freeze casting from chemical cross-linked polycarbosilane , 2018 .

[10]  W. Han,et al.  A ZrB2–SiC/SiC oxidation protective dual-layer coating for carbon/carbon composites , 2017 .

[11]  S. Deville.  The lure of ice templating: recent trends and opportunities for porous materials , 2017, 1706.05875.

[12]  Haiyan Du,et al.  Synthesis and properties of porous alumina ceramics with inter-locked plate-like structure through the tert-butyl alcohol-based gel-casting method , 2017 .

[13]  Sukyoung Kim,et al.  Thermal and mechanical behavior of ZrTiO4-TiO2 porous ceramics by direct foaming , 2016 .

[14]  Shan Qiu,et al.  Freeze cast fabrication of porous ceramics using tert-butyl alcohol–water crystals as template , 2016 .

[15]  R. Bordia,et al.  Effect of Macropore Anisotropy on the Mechanical Response of Hierarchically Porous Ceramics , 2016 .

[16]  Adam J. Stevenson,et al.  Gas permeability of ice-templated, unidirectional porous ceramics , 2016, Science and technology of advanced materials.

[17]  V. Medri,et al.  Ice templating of ZrB2–SiC systems , 2015 .

[18]  E. Olevsky,et al.  Sintering of bi-porous titanium dioxide scaffolds: Experimentation, modeling and simulation , 2015 .

[19]  Xinghong Zhang,et al.  Dispersion and Rheology of Aqueous Zirconium Diboride Nanosuspensions , 2014 .

[20]  Y. Miyamoto,et al.  Fabrication of porous silicon carbide ceramics with high porosity and high strength , 2014 .

[21]  Chang‐an Wang,et al.  A novel way to fabricate tubular porous mullite membrane supports by TBA-based freezing casting method , 2013 .

[22]  Xinghong Zhang,et al.  Effects of solids loading on microstructure and mechanical properties of HfB2–20 vol.% MoSi2 ultra high temperature ceramic composites through aqueous gelcasting route , 2013 .

[23]  Xinghong Zhang,et al.  Microstructure and mechanical properties of ZrB2–SiC porous ceramic by camphene-based freeze casting , 2013 .

[24]  Liu Qiang,et al.  Fabrication of gradient porous β-SiAlON ceramics via a camphene-based freeze casting process , 2012 .

[25]  Xinghong Zhang,et al.  Aqueous gelcasting of ZrB2–SiC ultra high temperature ceramics , 2012 .

[26]  C. Bauschlicher,et al.  Ab Initio Computations of Electronic, Mechanical, and Thermal Properties of ZrB2 and HfB2 , 2011 .

[27]  Yong Huang,et al.  Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures , 2010 .

[28]  Dou Zhang,et al.  Porous Al2O3–ZrO2 composites fabricated by an ice template method , 2010 .

[29]  G. Meng,et al.  Reaction-sintered porous mineral-based mullite ceramic membrane supports made from recycled materials. , 2009, Journal of hazardous materials.

[30]  Jiecai Han,et al.  Ultra-high-porosity zirconia ceramics fabricated by novel room-temperature freeze-casting , 2009 .

[31]  F. Doğan,et al.  Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[32]  Hyoun‐Ee Kim,et al.  Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering , 2008 .

[33]  G. Hilmas,et al.  Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC , 2007 .

[34]  J. J. Mecholsky,et al.  Bioactivity of tape cast and sintered bioactive glass-ceramic in simulated body fluid. , 2002, Biomaterials.

[35]  R. Rice,et al.  Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations , 1993, Journal of Materials Science.