Temperature Sensing Characteristics Based on Up-Taper and Single Mode–Multimode Fiber Structure

A novel temperature sensor based on up-taper and single mode-multimode fiber has been presented and demonstrated in this letter. The sensor is fabricated by fusing an up-taper in a single mode fiber (SMF) and splicing the SMF with a section of multimode fiber. In the taper region, a part of light is propagated from the fiber core into the cladding and a series of high-order modes are excited. The reflected light will be coupled back into the core to interfere with the residual core mode when passing through the taper again. Compared with the conventional single mode-multimode-single mode (SMS) fiber sensor, temperature sensitivity of the sensing probe, which consists of SMS and up-taper structure, is improved greatly. According to the experimental results, the temperature sensitivity of 89.42 pm/°C in the temperature range of 20 °C~80 °C can be achieved. The sensor has a series of advantages, such as high sensitivity, low cost, compact size, and reflective measurement.

[1]  Sailing He,et al.  Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer , 2010, IEEE Sensors Journal.

[2]  In-Fiber Modal Interferometer Based on Coaxial Dual-Waveguide Fiber for Temperature Sensing , 2014, IEEE Photonics Technology Letters.

[3]  Hai Xiao,et al.  Temperature Compensated Refractometer Based on a Cascaded SMS/LPFG Fiber Structure , 2014 .

[4]  Hong-Bo Sun,et al.  Compact Long-Period Fiber Gratings With Resonance at Second-Order Diffraction , 2012, IEEE Photonics Technology Letters.

[5]  Experimental and Theoretical Investigations of Bending Loss and Birefringence in Embedded-Core Hollow Fiber , 2012, Journal of Lightwave Technology.

[6]  Kenneth T. V. Grattan,et al.  Temperature characterization of Long Period Gratings written in three different types of optical fibre for potential high temperature measurements , 2010 .

[7]  W. Han,et al.  Enhanced Sensitivity of the FBG Temperature Sensor Based on the PbO-GeO$_{2}$ -SiO$_{2}$ Glass Optical Fiber , 2010, Journal of Lightwave Technology.

[8]  Enbang Li,et al.  Fiber-optic temperature sensor based on interference of selective higher-order modes , 2006 .

[9]  Wei Wang,et al.  Single-Mode-Multimode Fiber Structure Based Sensor for Simultaneous Measurement of Refractive Index and Temperature , 2013, IEEE Sensors Journal.

[10]  Shiquan Tao,et al.  A fiber optic temperature sensor with an epoxy-glue membrane as a temperature indicator , 2006 .

[11]  Jeroen Missinne,et al.  Highly Sensitive Waveguide Bragg Grating Temperature Sensor Using Hybrid Polymers , 2016, IEEE Photonics Technology Letters.

[12]  Kyriacos Kalli,et al.  Thermal response of Bragg gratings in PMMA microstructured optical fibers. , 2007, Optics express.

[13]  Xinlei Zhou,et al.  Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement , 2013 .

[14]  Meihua Bi,et al.  A Sensitivity-Enhanced Refractive Index Sensor Using a Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper , 2012, Sensors.

[15]  Zhang Hua,et al.  Metal coating of fiber Bragg grating and the temperature sensing character after metallization , 2009 .

[16]  K. Grattan,et al.  Characterization of an optical fiber thermometer using Tm3+: YAG crystal, based on the fluorescence lifetime approach , 2003 .

[17]  Wei-Xin Ren,et al.  FBG force-testing ring for bridge cable force monitoring and temperature compensation , 2015 .