Microstructure evolution and elevated temperature wear performance of in-situ laser-synthesized Ti-25Al-17Nb coating on Ti-6Al-4V

[1]  Yanrong Wu,et al.  Microstructure and tribological properties of laser in-situ synthesized Ti3Al composite coating on Ti-6Al-4V , 2020, Surface and Coatings Technology.

[2]  I. Popa,et al.  Degradation mechanism of Ti-6Al-2Sn-4Zr-2Mo-Si alloy exposed to solid NaCl deposit at high temperature , 2020 .

[3]  Sun Caixia,et al.  The effect of Nb and Si on the hot corrosion behaviors of TiAl coatings on a Ti-6Al-4V alloy , 2020 .

[4]  Daolun L. Chen,et al.  Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy , 2020 .

[5]  W. Xu,et al.  Effect of Sn addition on the high-temperature oxidation behavior of high Nb-containing TiAl alloys , 2020 .

[6]  Chen Cheng,et al.  Impact fatigue behaviors of Ti6V4Al alloy under compressive and tensile stresses , 2019, Wear.

[7]  F. Pyczak,et al.  Evidence for deformation twinning of the D019-α2 phase in a high Nb containing TiAl alloy , 2019, Intermetallics.

[8]  Jian Sun,et al.  Formation and temporal evolution of modulated structure in high Nb-containing lamellar γ-TiAl alloy , 2019, Acta Materialia.

[9]  S. Neumeier,et al.  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides , 2019 .

[10]  Huijun Li,et al.  Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloys , 2018, Materials Characterization.

[11]  Chuanzhong Chen,et al.  Microstructure and high temperature oxidation behavior of Ti-Al-Nb-Si coatings on Ti-6Al-4V alloy , 2018, Journal of Alloys and Compounds.

[12]  Hailiang Liu,et al.  Microstructure evolution, B2 grain growth kinetics and fracture behaviour of a powder metallurgy Ti-22Al-25Nb alloy fabricated by spark plasma sintering , 2018, Materials Science and Engineering: A.

[13]  Jian Sun,et al.  High-resolution electron microscopy characterization of modulated structure in high Nb-containing lamellar γ-TiAl alloy , 2018 .

[14]  A. Stark,et al.  Morphology and stability of orthorhombic and hexagonal phases in a lamellar γ-Ti-42Al-8.5Nb alloy-A transmission electron microscopy study , 2017 .

[15]  Vadim Sufiiarov,et al.  In-situ synthesis of Ti2AlNb-based intermetallic alloy by selective laser melting , 2017 .

[16]  N. Schell,et al.  Orthorhombic phase formation in a Nb-rich γ-TiAl based alloy – An in situ synchrotron radiation investigation , 2016 .

[17]  X. Hou,et al.  Isothermal oxidation mechanism of Nb–Ti–V–Al–Zr alloy at 700–1200 °C: Diffusion and interface reaction , 2015 .

[18]  Ashutosh Kumar Singh,et al.  A first principles study of Ti2AlNb intermetallic , 2015 .

[19]  F. Dunne,et al.  Texture, hardening and non-proportionality of strain in BCC polycrystal deformation , 2013 .

[20]  J. Lin,et al.  Omega phase in as-cast high-Nb-containing TiAl alloy , 2013 .

[21]  J. Lin,et al.  Effect of Nb on oxidation behavior of high Nb containing TiAl alloys , 2011 .

[22]  T. Velikanova,et al.  The Al–B–Nb–Ti system: IV. Experimental study and thermodynamic re-evaluation of the binary Al–Nb and ternary Al–Nb–Ti systems , 2009 .

[23]  S. Demakov,et al.  Microstructure and plastic deformation of orthorhombic titanium aluminides Ti2AlNb. III. Formation of transformation twins upon the B2 → O phase transformation , 2007 .

[24]  Wen Li-shi,et al.  Effect of Ni-Al coating on high temperature oxidation behaviors of Ti-22Al-26Nb alloy , 2005 .

[25]  S. Suwas,et al.  Texture evolution during β → O → α2 and β → α2 phase transformations in a Ti3Al–Nb alloy , 2005 .

[26]  Y. P. Kathuria,et al.  Some aspects of laser surface cladding in the turbine industry , 2000 .

[27]  S. Kamat,et al.  Effect of alloying elements and heat treatment on the fracture toughness ofTi–Al–Nb alloys , 1998 .

[28]  W. Boettinger,et al.  Phase transformations in the (Ti, Nb)3 Al section of the TiAlNb system—II. Experimental tem study of microstructures , 1994 .

[29]  H. Inui,et al.  Plastic deformation of single crystals of a DO19 compound with an off-stoichiometric composition (Ti-36·5 at.% Al) at room temperature , 1993 .

[30]  T. K. Nandi,et al.  A new ordered orthorhombic phase in a Ti3AlNb alloy , 1988 .

[31]  C. Kwok.  Laser surface modification of alloys for corrosion and erosion resistance , 2012 .

[32]  M. Yoshihara,et al.  Effects of Nb addition on oxidation behavior of TiAl , 1995 .