CMOS-integrated sige MEMS: Application to micro-mirrors

SiGe is a very interesting material for integrating MEMS and CMOS in a MEMS-last approach. SiGe layers are, due to their similar crystal structure, very comparable to Si layers: inherently very reliable, high elastic constants and high intrinsic quality factors and they can be processed using similar state-of-the-art tools. All these desired properties can be reached at a deposition temperature which is low enough to allow for post-processing the MEMS layers on top of the IC. As an application example, micro-crystalline SiGe has been used as structural layer for fabricating 10cm2 11 MPixel CMOS-integrated micro-mirror arrays. The array consists of 8 µm × 8 µm pixels which can be individually addressed by an analog voltage to enable accurate tilt angle modulation. A stable average cupping below 7 nm, an RMS roughness below 1 nm and a long lifetime (≫1012 cycles) are demonstrated.

[1]  Larry J. Hornbeck,et al.  Digital Light Processing for high-brightness high-resolution applications , 1997, Electronic Imaging.

[2]  Novel high growth rate processes for depositing poly-SiGe structural layers at CMOS compatible temperatures , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[3]  A. Witvrouw,et al.  High throughput measurement techniques for wafer level yield inspection of MEMS devices , 2008, International Symposium on Laser Metrology.

[4]  M. Sussman,et al.  Maskless fabrication of light-directed oligonucleotide microarrays using a digital micromirror array , 1999, Nature Biotechnology.

[5]  R. Howe,et al.  Low-Temperature LPCVD MEMS Technologies , 2002 .

[6]  A. Witvrouw,et al.  Highly reliable and extremely stable SiGe micro-mirrors , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[7]  A. Jourdain,et al.  Through-silicon via and die stacking technologies for microsystems-integration , 2008, 2008 IEEE International Electron Devices Meeting.

[8]  Tsu-Jae King,et al.  Thermal budget limits of quarter-micrometer foundry CMOS for post-processing MEMS devices , 2005, IEEE Transactions on Electron Devices.

[9]  A. Jourdain,et al.  3D stacked IC demonstration using a through Silicon Via First approach , 2008, 2008 IEEE International Electron Devices Meeting.

[10]  A. Witvrouw,et al.  A 10 μm thick poly-SiGe gyroscope processed above 0.35 μm CMOS , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[11]  H. Bender,et al.  Experimental determination of the maximum post-process annealing temperature for standard CMOS wafers , 2001 .

[12]  I. De Wolf,et al.  Wafer level characterization and failure analysis of microsensors and actuators , 2008, 2008 IEEE Sensors.

[13]  P. De Moor,et al.  Packaging of 11 MPixel CMOS-Integrated SiGe Micro-Mirror Arrays , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.

[14]  Ann Witvrouw,et al.  New low-stress PECVD poly-SiGe Layers for MEMS , 2003 .

[15]  K. Baert,et al.  The novel use of low temperature hydrogenated microcrystalline silicon germanium (µcSiGe , 2004 .

[16]  A. Witvrouw,et al.  Highly reliable CMOS-integrated 11MPixel SiGe-based micro-mirror arrays for high-end industrial applications , 2008, 2008 IEEE International Electron Devices Meeting.

[17]  R. Howe,et al.  Post-CMOS integration of germanium microstructures , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[18]  A. Witvrouw,et al.  Long-term reliability measurements on MEMS using a laser-Doppler vibrometer , 2008, International Symposium on Laser Metrology.

[19]  T. Kenny,et al.  New thin film epitaxial polysilicon encapsulation for piezoresistive accelerometers , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[20]  C. Hoof,et al.  Poly-SiGe, a superb material for MEMS , 2003 .

[21]  L.J. Hornbeck,et al.  Combining Digital Optical MEMS, CMOS and Algorithms for Unique Display Solutions , 2007, 2007 IEEE International Electron Devices Meeting.

[22]  Minghong Yang,et al.  Highly reflective coatings for micromechanical mirror arrays operating in the DUV and VUV spectral range , 2005, SPIE MOEMS-MEMS.

[23]  Ingrid De Wolf,et al.  Functionality, yield and reliability analysis of SiGe micro-mirrors using automated optical measurement techniques , 2009 .

[24]  E. Beyne,et al.  The indent reflow sealing (IRS) technique-a method for the fabrication of sealed cavities for MEMS devices , 2000, Journal of Microelectromechanical Systems.