Synthesis of Boron Nitride Nanotubes by a Template-Assisted Polymer Thermolysis Process

Highly ordered arrays of boron nitride nanotubes (BN-NTs) were prepared for the first time by combining a polymer thermolysis route and a template process. The strategy involves four steps, i.e., synthesis of a liquid polymeric borazine, liquid-phase infiltration of an alumina membrane, thermolysis at 1200 °C under nitrogen of the polymer confined in the 200 nm ordered nanochannels, and template etching to generate BN-NTs arrays supported by a BN sheet. Their crystallinity was controlled through further high-temperature treatments. The thin multiwall BN-NTs displaying dimensions corresponding to the pore size were characterized by electron microscopies and electron energy loss spectroscopy. It was demonstrated that the formation of nanotubes was governed by evaporation of low molecular weight species during the initial steps of the thermolysis, causing loss of nanowire integrity, while a thin film remained and covered the pore walls as a result of the high surface energy of the alumina mold.

[1]  G. Ferro,et al.  A Raman Spectroscopy Study of Individual SiC Nanowires , 2007 .

[2]  C. Balan,et al.  Design of a series of preceramic B -tri (methylamino )borazine -based polymers as fiber precursors : Architecture, thermal behavior, and melt-spinnability , 2007 .

[3]  Jonathan N. Coleman,et al.  Mechanical Reinforcement of Polymers Using Carbon Nanotubes , 2006 .

[4]  M. Weinmann,et al.  Boron-modified polysilazane as a novel single-source precursor for SiBCN ceramic fibers: synthesis, melt-spinning, curing and ceramic conversion , 2005 .

[5]  A. Raychaudhuri,et al.  Fabrication of nanowires of multicomponent oxides: Review of recent advances , 2005 .

[6]  Younan Xia,et al.  Some recent developments in the chemical synthesis of inorganic nanotubes. , 2005, Chemical communications.

[7]  A. Kohyama,et al.  Single‐Crystal SiC Nanowires with a Thin Carbon Coating for Stronger and Tougher Ceramic Composites , 2005 .

[8]  D. Cornu,et al.  Crystallinity, Crystalline Quality, and Microstructural Ordering in Boron Nitride Fibers , 2005 .

[9]  M. El-Sayed,et al.  Chemistry and properties of nanocrystals of different shapes. , 2005, Chemical reviews.

[10]  Peidong Yang,et al.  The Chemistry and Physics of Semiconductor Nanowires , 2005 .

[11]  J. Huang,et al.  HRTEM and EELS Studies on the Amorphization of Hexagonal Boron Nitride Induced by Ball Milling , 2004 .

[12]  R. Vaidyanathan,et al.  Carbon‐Nanotube‐Reinforced Polymer‐Derived Ceramic Composites , 2004 .

[13]  Lars Samuelson,et al.  Semiconductor nanowires for 0D and 1D physics and applications , 2004 .

[14]  Lei Jiang,et al.  Control Growth of One-Dimensional Nanostructures of Organic Materials , 2004 .

[15]  Jin Zou,et al.  Boron nitride nanotubes: Pronounced resistance to oxidation , 2004 .

[16]  D. Cornu,et al.  Direct synthesis of amorphous silicon dioxide nanowires and helical self-assembled nanostructures derived therefrom , 2003 .

[17]  Younan Xia,et al.  One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications , 2003 .

[18]  Jörg Fink,et al.  Electronic structure of multiwall boron nitride nanotubes , 2003 .

[19]  P. Alphonse,et al.  Synthesis of mixed manganites with high surface area by thermal decomposition of oxalates , 2002 .

[20]  G. Ferro,et al.  Direct synthesis of β-SiC and h-BN coated β-SiC nanowires , 2002 .

[21]  Yingke Zhou,et al.  Sol–gel template synthesis and structural properties of a highly ordered LiNi0.5Mn0.5O2 nanowire array , 2002 .

[22]  L. Bourgeois,et al.  Tubes of rhombohedral boron nitride , 2000 .

[23]  R. Ruoff,et al.  CVD Growth of Boron Nitride Nanotubes , 2000 .

[24]  Peter Greil,et al.  Polymer Derived Engineering Ceramics , 2000 .

[25]  L. Sneddon,et al.  An efficient template synthesis of aligned boron carbide nanofibers using a single-source molecular precursor , 2000 .

[26]  R. Ruoff,et al.  Chemical Vapor Deposition Based Synthesis of Carbon Nanotubes and Nanofibers Using a Template Method , 1998 .

[27]  M. Eremets,et al.  Nanotubes in boron nitride laser heated at high pressure , 1996 .

[28]  F. Willaime,et al.  Boron nitride nanotubes with reduced numbers of layers synthesized by arc discharge. , 1996, Physical review letters.

[29]  J. S. Beck,et al.  Synthesis, Properties, and Ceramic Conversion Reactions of Polyborazylene. A High-Yield Polymeric Precursor to Boron Nitride , 1995 .

[30]  Steven G. Louie,et al.  Boron Nitride Nanotubes , 1995, Science.

[31]  L. Sneddon,et al.  Convenient Procedures for the Laboratory Preparation of Borazine , 1995 .

[32]  Charles R. Martin,et al.  Nanomaterials: A Membrane-Based Synthetic Approach , 1994, Science.

[33]  C. Prater,et al.  Nanowire Array Composites , 1994, Science.

[34]  C. R. Martin,et al.  Electrochemical Fabrication of Cadmium Chalcogenide Microdiode Arrays , 1993 .

[35]  Charles R. Martin,et al.  Template synthesis of metal microtubules , 1991 .

[36]  C. R. Martin,et al.  Template-Synthesized Polyacetylene Fibrils Show Enhanced Supermolecular Order , 1990 .

[37]  R. Paine,et al.  Synthetic routes to boron nitride , 1990 .

[38]  George E. Possin,et al.  A method for forming very small diameter wires (Notes) , 1970 .

[39]  Qinglin Cheng,et al.  Methylene-bridged carbosilanes and polycarbosilanes as precursors to silicon carbide—from ceramic composites to SiC nanomaterials , 2005 .

[40]  M. Moskovits,et al.  Composite Nanostructures Based on Template-Grown Boron Nitride Nanotubules , 2000 .