Performance evaluation of a nonimaging solar concentrator in terms of optical and thermal characteristics

A nontracking, nonimaging solar concentrator with a low‐heat‐loss configuration was proposed, and its optical and thermal performance was investigated. The reflector has a compound parabolic and involute shape so that the absorber is heated as uniformly as possible. To eliminate heat loss by conduction and convection, the mirror and absorber are enclosed in an evacuated glass tube. The concentrator presented here was simulated for the location of Sendai, Japan, and its acceptance angle was estimated as 23.44°. A ray‐tracing model was developed to evaluate its optical and thermal performance. The average optical efficiency was evaluated by a 2‐D ray‐tracing model, and a value of 72.7% was obtained. A thermal analysis of the absorber was conducted to evaluate the temperature uniformity. The results indicate that the temperature distribution of the absorber can be considered uniform. The thermal efficiency of the proposed solar concentrator was calculated as a function of the incidence angle and absorber temperature. With a concentration ratio of 2.51, the concentrator, even at an absorber temperature of 373 K, operates with an average efficiency of 47.8%, although the absorber was assumed to have a gray surface. The concentrator's thermal efficiency was compared with that of other solar collectors, and found to be higher than that of conventional solar collectors. © 2015 American Institute of Chemical Engineers Environ Prog, 35: 553–564, 2016

[1]  Roland Winston,et al.  Efficient Light Coupler for Threshold Čerenkov Counters , 1966 .

[2]  Roland Winston,et al.  Principles of solar concentrators of a novel design , 1974 .

[3]  A. Rabl.  Optical and thermal properties of Compound Parabolic Concentrators , 1975 .

[4]  W. T. Welford,et al.  The Optics of Nonimaging Concentrators: Light and Solar Energy , 1978 .

[5]  Roland Winston,et al.  Ideal flux concentrators with reflector gaps. , 1978, Applied optics.

[6]  Roland Winston,et al.  Practical design considerations for CPC solar collectors , 1979 .

[7]  W. R. McIntire.  New reflector design which avoids losses through gaps between tubular absorbers and reflectors , 1980 .

[8]  T. C. Kandpal,et al.  Some geometrical design aspects of a linear fresnel reflector concentrator , 1980 .

[9]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[10]  Roland Winston,et al.  A new evacuated CPC collector tube , 1982 .

[11]  J. Howell,et al.  Solar-thermal energy systems : analysis and design , 1982 .

[12]  Roland Winston,et al.  A stationary evacuated collector with integrated concentrator , 1984 .

[13]  Comment—The CPC concept—theory and practice , 1984 .

[14]  Ari Rabl,et al.  Active solar collectors and their applications , 1985 .

[15]  Jeffrey M. Gordon,et al.  Truncation of CPC solar collectors and its effect on energy collection , 1985 .

[16]  David R. Mills,et al.  Relative cost-effectiveness of CPC reflector designs suitable for evacuated absorber tube solar collectors , 1986 .

[17]  Roman Kuchkuda,et al.  An introduction to ray tracing , 1993, Comput. Graph..

[18]  Faik Abdul Wahab Hamad.  The performance of a cylindrical parabolic solar concentrator , 1988 .

[19]  S. D. Probert,et al.  Measured performances of curved inverted-Vee, absorber compound parabolic concentrating solar-energy collectors , 1989 .

[20]  Takashi Maruyama.  On drag variation due to array patterns of cubic blocks , 1991 .

[21]  Uniform isotropic emission from an involute reflector , 1993 .

[22]  D. R. Freitag,et al.  Principles of Heat Transfer , 1997 .

[23]  Björn Karlsson,et al.  Ageing of solar booster reflector materials , 1998 .

[24]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[25]  S. Maruyama,et al.  Flat-Plate Solar Collector Performance with Coated and Uncoated Glass Cover , 2006 .

[26]  Soteris A. Kalogirou.  Recent Patents in Solar Energy Collectors and Applications , 2007 .

[27]  Yong Kim,et al.  An evaluation on thermal performance of CPC solar collector , 2008 .

[28]  Yiannis Tripanagnostopoulos,et al.  Study of the distribution of the absorbed solar radiation on the performance of a CPC-type ICS water heater , 2008 .

[29]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[30]  Enrico Zambolin,et al.  Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions , 2010 .

[31]  L. Chaar,et al.  Review of photovoltaic technologies , 2011 .

[32]  Li Zhu,et al.  Electrical and thermal performance of silicon concentrator solar cells immersed in dielectric liquids , 2011 .

[33]  Ranko Goic,et al.  review of solar photovoltaic technologies , 2011 .

[34]  A. Abdel-azim.  Fundamentals of Heat and Mass Transfer , 2011 .

[35]  Hulin Huang,et al.  A Novel Lens-Walled Compound Parabolic Concentrator for Photovoltaic Applications , 2012 .

[36]  O. A. Jaramillo,et al.  Design, construction, and testing of a parabolic trough solar concentrator for hot water and low enthalpy steam generation , 2012 .

[37]  O. A. Jaramillo,et al.  Parabolic trough concentrators for hot water generation: Comparison of the levelized cost of production , 2013 .

[38]  Abid Ustaoğlu,et al.  EVALUATION OF DUAL COMBINED PARABOLIC SOLAR CONCENTRATOR IN EVACUATED TUBE , 2013 .

[39]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[40]  Shigeki Hirasawa,et al.  Reduction of heat loss from solar thermal collector by diminishing natural convection with high-porosity porous medium , 2013 .

[41]  J. Cadafalch,et al.  Dynamic modelling of flat plate solar collectors. Analysis and validation under thermosyphon conditions , 2013 .

[42]  Jamel Orfi,et al.  Heat losses from parabolic trough solar collectors , 2014 .

[43]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .

[44]  L. Schwartz.  Handbook Of Heat Transfer , 2016 .