Additive manufacturing assisted investment casting: A low-cost method to fabricate periodic metallic cellular lattices

[1]  Moataz M. Attallah,et al.  Fracture of three-dimensional lattices manufactured by selective laser melting , 2019 .

[2]  Hongwei Song,et al.  Improving mechanical performance of fused deposition modeling lattice structures by a snap-fitting method , 2019, Materials & Design.

[3]  Hyeji Park,et al.  Mechanical and biocorrosive properties of magnesium-aluminum alloy scaffold for biomedical applications. , 2019, Journal of the mechanical behavior of biomedical materials.

[4]  Wen Wang,et al.  Enhanced compressive mechanical properties of aluminum based auxetic lattice structures filled with polymers , 2019, Composites Part B: Engineering.

[5]  Davis J McGregor,et al.  Automated metrology and geometric analysis of additively manufactured lattice structures , 2019, Additive Manufacturing.

[6]  D. Spiehl,et al.  Investigations on nozzle geometry in fused filament fabrication , 2019, Additive Manufacturing.

[7]  A. Lasagni,et al.  Influence of roughness achieved by periodic structures on the wettability of aluminum using direct laser writing and direct laser interference patterning technology , 2019, Journal of Materials Processing Technology.

[8]  V. Carneiro,et al.  Positive, zero and negative Poisson’s ratio non-stochastic metallic cellular solids: Dependence between static and dynamic mechanical properties , 2019, Composite Structures.

[9]  C. Wen,et al.  A Comparative Study on the Nanoindentation Behavior, Wear Resistance and in vitro Biocompatibility of SLM Manufactured CP-Ti and EBM Manufactured Ti64 Gyroid Scaffolds , 2019, Acta biomaterialia.

[10]  C. Seepersad,et al.  Heterogeneities dominate mechanical performance of additively manufactured metal lattice struts , 2019, Additive Manufacturing.

[11]  Jun Liu,et al.  Experimental and numerical analyses on the dynamic response of aluminum foam core sandwich panels subjected to localized air blast loading , 2019, Marine Structures.

[12]  D. Snelling,et al.  Mechanical and material properties of castings produced via 3D printed molds , 2019, Additive Manufacturing.

[13]  Xuexi Zhang,et al.  Processing and damping capacity of NiTi foams with laminated pore architecture. , 2019, Journal of the mechanical behavior of biomedical materials.

[14]  Haiqing Liu,et al.  Experimental study on the closed-cell aluminum foam shock absorption layer of a high-speed railway tunnel , 2019, Soil Dynamics and Earthquake Engineering.

[15]  G. Tryggvason,et al.  A numerical study of the effect of viscoelastic stresses in fused filament fabrication , 2019, Computer Methods in Applied Mechanics and Engineering.

[16]  D. Mondal,et al.  Microstructure and compressive deformation behavior of SS foam made through evaporation of urea as space holder , 2019, Materials Chemistry and Physics.

[17]  Shahriar Bakrani Balani,et al.  Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid , 2019, Additive Manufacturing.

[18]  E. Maire,et al.  Compressive performance and deformation mechanism of the dynamic gas injection aluminum foams , 2019, Materials Characterization.

[19]  C. Shi,et al.  Fabrication of in-situ grown carbon nanotubes reinforced aluminum alloy matrix composite foams based on powder metallurgy method , 2018, Materials Letters.

[20]  S. Manzoni,et al.  Damping behavior of 316L lattice structures produced by Selective Laser Melting , 2018, Materials & Design.

[21]  J. Dear,et al.  Acoustic resonance testing of additive manufactured lattice structures , 2018, Additive Manufacturing.

[22]  S. Das,et al.  Fabrication and investigation of influence of CaCO3 as foaming agent on Al-SiCp foam , 2018, Materials and Manufacturing Processes.

[23]  V. Carneiro,et al.  Axisymmetric auxetics , 2018, Composite Structures.

[24]  V. Carneiro,et al.  Solution Treatment Enhances Both Static and Damping Properties of Al–Si–Mg alloys , 2018, Metallurgical and Materials Transactions A.

[25]  Hugh Alan Bruck,et al.  Simulation of buckling of internal features during selective laser sintering of metals , 2018, Additive Manufacturing.

[26]  Xuxiao Li,et al.  Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing , 2018, Computational Materials Science.

[27]  J. Banhart,et al.  Particle size and fraction required to stabilise aluminium alloy foams created by gas injection , 2018, Scripta Materialia.

[28]  F. Vignat,et al.  A method to determine the depowdered height in lattices manufactured by electron beam melting , 2018, Journal of Manufacturing Processes.

[29]  A. du Plessis,et al.  Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion , 2018, Materials.

[30]  D. Shim,et al.  Additive manufacturing of porous metals using laser melting of Ti6Al4V powder with a foaming agent , 2018, Materials Research Express.

[31]  Jianzhong Fu,et al.  Inclined layer printing for fused deposition modeling without assisted supporting structure , 2018, Robotics and Computer-Integrated Manufacturing.

[32]  V. Carneiro,et al.  Heat treatment as a route to tailor the yield-damping properties in A356 alloys , 2018, Materials Science and Engineering: A.

[33]  Du Qiang,et al.  Compressive mechanical behavior of multiple wire metal rubber , 2018 .

[34]  Shu Beng Tor,et al.  Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .

[35]  Quanwei Che,et al.  The impact performance of honeycomb-filled structures under eccentric loading for subway vehicles , 2018 .

[36]  J. Pereira,et al.  Influence of particle diameter in mechanical performance of Al expanded clay syntactic foams , 2018 .

[37]  Vincenzo Crupi,et al.  Static behavior of lattice structures produced via direct metal laser sintering technology , 2017 .

[38]  Joshua D. Pribe,et al.  Modal analysis of metal additive manufactured parts , 2017 .

[39]  B. Kieback,et al.  Powder metallurgically manufactured cellular metals from carat gold alloys for decorative applications , 2017 .

[40]  D. Marghitu,et al.  Experimental and theoretical modeling of behavior of 3D-printed polymers under collision with a rigid rod , 2017 .

[41]  C. Emmelmann,et al.  Additive manufacturing of metals , 2016 .

[42]  V. Carneiro,et al.  Effect of grain and secondary phase morphologies in the mechanical and damping behavior of Al7075 alloys , 2016, Metals and Materials International.

[43]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[44]  Philip J. Withers,et al.  The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting , 2016 .

[45]  Guglielmo S. Aglietti,et al.  A review of multifunctional structure technology for aerospace applications , 2016 .

[46]  L. Krstulović-Opara,et al.  Dynamic compression of aluminium foam derived from infiltration casting of salt dough , 2016 .

[47]  Frédéric Vignat,et al.  Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting , 2015 .

[48]  Ki-Ju Kang,et al.  Wire-woven cellular metals: The present and future , 2015 .

[49]  Habibollah Molatefi,et al.  Out of plane crushing and local stiffness determination of proposed foam filled sandwich panel for Korean Tilting Train eXpress – Numerical study , 2015 .

[50]  Philip J. Withers,et al.  Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting , 2015 .

[51]  Jaehyung Ju,et al.  Compliant cellular structures: Application to a passive morphing airfoil , 2013 .

[52]  John Banhart,et al.  Light‐Metal Foams—History of Innovation and Technological Challenges , 2013 .

[53]  Johannes E. Schindelin,et al.  Fiji: an open-source platform for biological-image analysis , 2012, Nature Methods.

[54]  K. Kang,et al.  Compressive characteristics of a wire-woven cellular metal , 2012 .

[55]  Chuang Yang,et al.  Micro precision casting based on investment casting for micro structures with high aspect ratio , 2009 .

[56]  Ola L. A. Harrysson,et al.  Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting , 2008 .

[57]  Han Tong Loh,et al.  Micro-mould fabrication for a micro-gear via vacuum casting , 2007 .

[58]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[59]  M. Ashby,et al.  The mechanics of three-dimensional cellular materials , 1982, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[60]  Noy Cohen,et al.  Modeling the non-linear elastic response of periodic lattice materials , 2019, Mechanics of Materials.

[61]  Ali Gökhan Demir,et al.  Micro laser metal wire deposition for additive manufacturing of thin-walled structures , 2018 .

[62]  Vasily Ploshikhin,et al.  Three-dimensional modeling of the microstructure evolution during metal additive manufacturing , 2018 .

[63]  V. Carneiro,et al.  Deformation behaviour of self-expanding magnesium stents based on auxetic chiral lattices , 2016 .

[64]  G. Carlomagno,et al.  Composite Materials in the Aeronautical Industry , 2015 .

[65]  Vincenzo Crupi,et al.  Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam , 2013 .

[66]  L. Marșavina.  Fracture Mechanics of Cellular Solids , 2010 .

[67]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[68]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .