Evolution of anisotropy in hierarchical porous ceramics during sinter-forging

[1]  E. Olevsky,et al.  Homogenization of Biporous Agglomerated Powder Structures During High‐Temperature Consolidation , 2015 .

[2]  H. Shang,et al.  Densification and Microstructural Evolution of Hierarchically Porous Ceramics During Sintering , 2015 .

[3]  R. Bordia,et al.  Microstructural Evolution and Anisotropic Shrinkage in Constrained Sintering and Sinter Forging , 2012 .

[4]  A. Atkinson,et al.  Microstructure evolution in thin zirconia films: Experimental observation and modelling , 2011 .

[5]  Scott A. Barnett,et al.  Effect of composition of (La0.8Sr0.2MnO3–Y2O3-stabilized ZrO2) cathodes: Correlating three-dimensional microstructure and polarization resistance , 2010 .

[6]  O. Guillon,et al.  Effect of Anisotropic Microstructure on the Viscous Properties of an LTCC Material , 2007 .

[7]  O. Guillon,et al.  Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments , 2007 .

[8]  O. Guillon,et al.  Constrained Sintering of Alumina Thin Films: Comparison Between Experiment and Modeling , 2007 .

[9]  O. Guillon,et al.  Anisotropic Microstructural Development During the Constrained Sintering of Dip‐Coated Alumina Thin Films , 2007 .

[10]  Veena Tikare,et al.  Multi‐Scale Study of Sintering: A Review , 2006 .

[11]  André R. Studart,et al.  Processing Routes to Macroporous Ceramics: A Review , 2006 .

[12]  Gary L. Messing,et al.  Constrained Sintering of Low-Temperature Co-Fired Ceramics , 2006 .

[13]  V. Tikare,et al.  Modelling of anisotropic sintering in crystalline ceramics , 2005 .

[14]  Jing-Song Pan,et al.  Sintering Kinetics of Large Pores , 2005 .

[15]  Jing-Song Pan,et al.  Modelling microstructural evolution of porous polycrystalline materials and a numerical study of anisotropic sintering , 2005 .

[16]  M. Mayo,et al.  Sinter-Forging of Nanocrystalline Zirconia: II, Simulation , 2004 .

[17]  J. Rödel,et al.  Critical Evaluation of Hot Forging Experiments: Case Study in Alumina , 2003 .

[18]  J. Rödel,et al.  Evolution of defect size and strength of porous alumina during sintering , 2000 .

[19]  Eugene A. Olevsky,et al.  Theory of sintering: from discrete to continuum , 1998 .

[20]  Doh-Yeon Kim,et al.  Shrinkage of Large Isolated Pores during Hot Isostatic Pressing of Presintered Alumina Ceramics , 1995 .

[21]  Y. Kwon,et al.  Densification and Grain Growth of Porous Alumina Compacts , 1994 .

[22]  H. Riedel,et al.  Densification and creep in the final stage of sintering , 1994 .

[23]  F. Lange,et al.  Densification of Large Pores: I, Expriments , 1992 .

[24]  H. Bowen,et al.  Kinetics of Constrained‐Film Sintering , 1990 .

[25]  P. Dawson,et al.  An anisotropic continuum model for the sintering and compaction of powder packings , 1988 .

[26]  Rajendra K. Bordia,et al.  On constrained sintering—I. Constitutive model for a sintering body , 1988 .

[27]  G. Scherer,et al.  On constrained sintering-II. Comparison of constitutive models , 1988 .

[28]  G. Scherer,et al.  On constrained sintering-III. Rigid inclusions , 1988 .

[29]  A. Evans,et al.  Behavior of Large Pores During Sintering and Hot Isostatic Pressing , 1986 .

[30]  R. Raj,et al.  Shear Deformation and Densification of Powder Compacts , 1986 .

[31]  L. C. Jonghe,et al.  Effect of Shear Stress on Sintering , 1984 .

[32]  R. Coble.  Diffusion Models for Hot Pressing with Surface Energy and Pressure Effects as Driving Forces , 1970 .

[33]  Mel I. Mendelson,et al.  Average Grain Size in Polycrystalline Ceramics , 1969 .

[34]  O. Guillon,et al.  Constrained sintering: A delicate balance of scales , 2008 .

[35]  O. Guillon,et al.  Anisotropic constitutive laws for sintering bodies , 2006 .

[36]  D. Bouvard,et al.  Anisotropy in Shrinkage During Sintering , 2006 .

[37]  J. Rödel,et al.  Evolution of strength determining flaws during sintering , 1996 .

[38]  B. Kellett,et al.  Experiments on pore closure during hot isostatic pressing and forging , 1988 .

[39]  L. C. Jonghe,et al.  Creep During Sintering of Porous Compacts , 1986 .

[40]  Anthony G. Evans,et al.  Residual Stresses in Machined Ceramic Surfaces , 1986 .

[41]  H. Exner,et al.  Problems in the Extension of Sintering Theories to Real Systems , 1973 .