Optimization of processing parameters for the manufacturing of jute stick binderless particleboard

[1]  M. Ferrandez-Villena,et al.  Study of the Utilisation of Almond Residues for Low-Cost Panels , 2019, Agronomy.

[2]  M. Maleque,et al.  Effects of Particle Sizes on the Properties of Binderless Boards Made from Rattan Furniture Waste , 2019, Journal of Engineering Science.

[3]  Ashaduzzaman,et al.  Development of Binderless Composites from Different Nonwood Lignocellulosic Materials: Overview , 2019, Handbook of Ecomaterials.

[4]  M. Rosa,et al.  Binderless Fiberboards Made from Unripe Coconut Husks , 2018 .

[5]  R. Halis,et al.  Effects of two-step post heat-treatment in palm oil on the properties of oil palm trunk particleboard , 2018, Industrial Crops and Products.

[6]  Masatoshi Sato,et al.  The effects of chemical components and particle size on the mechanical properties of binderless boards made from oak (Quercus spp.) logs degraded by shiitake fungi (Lentinula edodes) , 2018, Journal of Wood Science.

[7]  M. A. Quaiyyum,et al.  Variation of morphological and chemical properties of three varieties of jute stick. , 2016 .

[8]  Masatoshi Sato,et al.  Properties of binderless board made from rice straw: The morphological effect of particles , 2015 .

[9]  Masatoshi Sato,et al.  Optimization of press temperature and time for binderless particleboard manufactured from oil palm trunk biomass at different thickness levels , 2015 .

[10]  Daihui Zhang,et al.  A review of preparation of binderless fiberboards and its self-bonding mechanism , 2015, Wood Science and Technology.

[11]  M. Rahaman,et al.  Dissolving pulp from jute stick. , 2015, Carbohydrate polymers.

[12]  F. Mobarak,et al.  Advanced binderless board-like green nanocomposites from undebarked cotton stalks and mechanism of self-bonding , 2013, Cellulose.

[13]  Hao Wang,et al.  Mechanical and thermal properties of jute fibre reinforced composites , 2013 .

[14]  K. Umemura,et al.  Characterization of bagasse binderless particleboard manufactured in high-temperature range , 2012, Journal of Wood Science.

[15]  R. Sun,et al.  FRACTIONAL SEPARATION AND STRUCTURAL FEATURES OF HEMICELLULOSES FROM SWEET SORGHUM LEAVES , 2012 .

[16]  A. A. Astimar,et al.  Mechanical and dimensional stability properties of medium-density fibreboard produced from treated oil palm empty fruit bunch. , 2012 .

[17]  D. C. Nath,et al.  Population Increase and Deforestation : A Study in Kokrajhar District of Assam , India , 2012 .

[18]  Masatoshi Sato,et al.  Influence of press temperature on the properties of binderless particleboard made from oil palm trunk , 2011 .

[19]  Laxmikanta Nayak,et al.  Utilisation of Jute By-Products: A Review , 2011 .

[20]  Masatoshi Sato,et al.  Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk , 2010 .

[21]  Jianying Xu,et al.  Effect of different hot-pressing technology on mechanical properties of binderless particleboard from kenaf core , 2010, 2010 International Conference on Mechanic Automation and Control Engineering.

[22]  C. Santulli,et al.  Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites , 2010 .

[23]  N. Yunus,et al.  Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks , 2009 .

[24]  Alfred Teischinger,et al.  Cement bonded composites - A mechanical review , 2008, BioResources.

[25]  Seung-Won Oh,et al.  IMPROVING CORE BOND STRENGTH OF PARTICLEBOARD THROUGH PARTICLE SIZE REDISTRIBUTION , 2008 .

[26]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[27]  Masafumi Inoue,et al.  Steam or Heat Fixation of Compressed Wood , 2007 .

[28]  Mark F. Davis,et al.  MODIFICATION OF WOOD FIBER USING STEAM , 2006 .

[29]  Donghai Wang,et al.  Properties of particleboard bond with rice bran and polymeric methylene diphenyl diisocyanate adhesives , 2006 .

[30]  N. Okuda,et al.  Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition , 2006, Journal of Wood Science.

[31]  F. Carrillo,et al.  Comparative Study of Wood Samples of the Northern Area of Catalonia by FTIR , 2005 .

[32]  Takashi Watanabe,et al.  Chemical changes in steam-pressed kenaf core binderless particleboard , 2005, Journal of Wood Science.

[33]  N. Okuda,et al.  Manufacture and mechanical properties of binderless boards from kenaf core , 2004, Journal of Wood Science.

[34]  Hilde van der Togt,et al.  Publisher's Note , 2003, J. Netw. Comput. Appl..

[35]  R. Sun,et al.  Fractional isolation, physico-chemical characterization and homogeneous esterification of hemicelluloses from fast-growing poplar wood , 2001 .

[36]  R. Sun,et al.  Chemical, structural, and thermal characterizations of alkali-soluble lignins and hemicelluloses, and cellulose from maize stems, rye straw, and rice straw , 2001 .

[37]  D. Montané,et al.  Binderless composites from pretreated residual softwood , 1999 .

[38]  P. McMillan,et al.  Temperature dependence of the OH⁻ absorption in SiO2 glass and melt to 1975 K , 1998 .

[39]  K. Iiyama,et al.  Preparation of Binderless Boards from Steam Exploded Pulps of Oil Palm (Elaeis guneensis Jaxq.) Fronds and Structural Characteristics of Lignin and Wall Polysaccharides in Steam Exploded Pulps to be Discussed for Self-Bindings , 1998 .

[40]  E. Back.  The Bonding Mechanism in Hardboard Manufacture Review Report , 2009 .

[41]  George E. Woodson,et al.  Fiberboard manufacturing practices in the United States , 1987 .

[42]  L. E. Wise,et al.  A CHLORITE HOLOCELLULOSE, ITS FRACTIONATION AND BEARING ON SUMMATIVE WOOD ANALYSIS AND STUDIES ON THE HEMICELLULOSES , 1946 .