Methodology for developing a high-precision ultrasound flow meter and fluid velocity profile reconstruction

This article reports the methodology used to develop a high-precision ultrasound transit time flow meter dedicated to liquid hydrocarbons. This kind of flow meter is designed for custody transfer applications requiring accuracy better than 0.15% of reading. We focus here on certain specific points to achieve this accuracy. The transit time method needs to estimate accurately the time delay between signals received by a pair of transducers. In this study, we review different ways of estimating this time delay. We also propose a specific configuration of the flow meter paths. In particular, this configuration compensates for the swirl phenomenon, which has a significant impact on the accuracy of the flow meter. We also propose a theoretical parametric profile to reconstruct the fluid velocity profile in order to perform in situ diagnosis of the flow. The parameters of the model are estimated from the measurements of the flow meter. Simulations and experimental results showed that this method provides characterization of the flow in disturbed and undisturbed flow conditions.

[1]  L. Salami,et al.  Application of a computer to asymmetric flow measurement in circular pipes , 1984 .

[2]  Bodo Mickan,et al.  Systematic investigation of pipe flows and installation effects using laser Doppler anemometry—Part I. Profile measurements downstream of several pipe configurations and flow conditioners , 1996 .

[3]  Gregor J. Brown,et al.  Ultrasonic transit-time flowmeters modelled with theoretical velocity profiles: methodology , 2000 .

[4]  D. Jackson,et al.  A new integration technique for flowmeters with chordal paths , 1990 .

[5]  O. Reynolds.  III. An experimental investigation of the circumstances which determine whether the motion of water shall be direct or sinuous, and of the law of resistance in parallel channels , 1883, Proceedings of the Royal Society of London.

[6]  F. Peters,et al.  Effects of upstream installations on the reading of an ultrasonic flowmeter , 2004 .

[7]  Gaetano Scarano,et al.  Discrete time techniques for time delay estimation , 1993, IEEE Trans. Signal Process..

[8]  L. Lynnworth,et al.  Ultrasonic flowmeters: half-century progress report, 1955-2005. , 2006, Ultrasonics.

[9]  Kon Max Wong,et al.  Design of optimum signals for the simultaneous estimation of time delay and Doppler shift , 1993, IEEE Trans. Signal Process..

[10]  D. Kouame,et al.  Transit time ultrasonic flowmeter : velocity profile estimation , 2005, IEEE Ultrasonics Symposium, 2005..

[11]  Stephen B. M. Beck,et al.  Measurement of fluid flow rates through cracks , 1997 .

[12]  G. Carter,et al.  The generalized correlation method for estimation of time delay , 1976 .

[13]  E. Weinstein,et al.  Delay and Doppler estimation by time-space partition of the array data , 1983 .

[14]  H. Johari,et al.  Direct measurement of circulation using ultrasound , 1998 .

[15]  Lora G. Weiss,et al.  Time-varying system characterization for wideband input signals , 1996, Signal Process..

[16]  D. Kouame,et al.  3J-2 Access of Asymmetric Fluid Velocity Profile in High Precision Ultrasonic Velocimetry , 2006, 2006 IEEE Ultrasonics Symposium.

[17]  Chrysostomos L. Nikias,et al.  Time delay estimation in unknown Gaussian spatially correlated noise , 1988, IEEE Trans. Acoust. Speech Signal Process..

[18]  D. Pruzan.  Evaluation of an Ultrasonic Vortex Detection System , 2005 .

[19]  R. Cabot.  A note on the application of the Hilbert transform to time delay estimation , 1981 .

[20]  M. Blejan,et al.  Ultrasonic Flowmeter , 2006, 2006 29th International Spring Seminar on Electronics Technology.

[21]  W. M. Ali.  Estimation de retards, de facteurs d'échelle et de variations de forme de signaux vectoriels : application aux signaux biomédicaux , 2001 .