Realization of current mode universal shadow filter

Abstract In this paper, a current-mode universal shadow filter is proposed using a new variant of current differencing transconductance amplifier (CDTA), namely current controlled current differencing cascaded transconductance amplifier (CC-CDCTA) and two capacitors. It realizes three shadow filter functioning; low pass (LPS), high pass (HPS) and band pass (BPS). Furthermore, it is extended to a universal filter by adding one second generation current conveyor (CCII) and CC-CDCTA building blocks. The proposed configuration realizes all the standard responses of a universal shadow filter such as LPS, BPS, HPS, band-reject (BRS), and all pass (APS) simultaneously. It does not use any resistor. The presented shadow filter utilizes the LP and BP outputs of the basic filter in the feedback amplifier to obtain the desired universal shadow filter functionality. The pole frequency (ωos) and quality factor (Qos) of the shadow filter is electronically tunable using the gain of the feedback amplifiers. The ωos and Qos can also be tuned without disturbing each other. It is also found to be suitable for full cascadability. The validation is done using 180 nm technology in Cadence. Experimental verification has also been done using IC AD844, and CA3080 and found satisfactory results.

[1]  Jiun Wei Horng,et al.  High input impedance voltage-mode biquad with one input and five outputs employing four CCII ICs , 2016 .

[2]  Oguzhan Cicekoglu,et al.  A class of MOSFET-C multifunction filters , 2017, 2017 10th International Conference on Electrical and Electronics Engineering (ELECO).

[3]  Dalibor Biolek,et al.  Shadow filters for orthogonal modification of characteristic frequency and bandwidth , 2010 .

[4]  Worapong Tangsrirat,et al.  Single CFTA-based dual-mode biquadratic filter , 2018, 2018 3rd International Conference on Control and Robotics Engineering (ICCRE).

[5]  Erkan Yuce.  A single-input multiple-output voltage-mode second-order universal filter using only grounded passive components , 2017 .

[6]  Worapong Tangsrirat,et al.  High-Input Impedance Voltage-Mode Multifunction Filter Using a Single DDCCTA and Grounded Passive Elements , 2011 .

[7]  Shahram Minaei,et al.  A new ICCII based resistor-less current-mode first-order universal filter with electronic tuning capability , 2017, Microelectron. J..

[8]  A. Fabre,et al.  Shadow filters generalisation to nth-class , 2010 .

[9]  A. Fabre,et al.  Shadow filters - new family of second-order filters , 2010 .

[10]  Fırat Kaçar,et al.  Band-pass filter with high quality factor based on current differencing transconductance amplifier and current amplifier , 2017 .

[11]  Hua-Pin Chen,et al.  Independently tunable voltage-mode OTA-C biquadratic filter with five inputs and three outputs and its fully-uncoupled quadrature sinusoidal oscillator application , 2019, AEU - International Journal of Electronics and Communications.

[12]  Nan-Hui Chiang,et al.  High-Q biquadratic notch filter synthesis using nodal admittance matrix expansion , 2015 .

[13]  Hua-Pin Chen,et al.  High-input impedance tunable DDCCTA-based voltage-mode universal filter with grounded capacitors and resistors , 2016 .

[14]  Montree Kumngern,et al.  Shadow filters based on DDCC , 2017, IET Circuits Devices Syst..

[15]  Neeta Pandey,et al.  Single-Input Four-Output Current Mode Filter Using Operational Floating Current Conveyor , 2013 .

[16]  Data Ram Bhaskar,et al.  Voltage-Mode New Universal Biquad Filter Configuration Using a Single VDIBA , 2014, Circuits Syst. Signal Process..

[17]  Worapong Tangsrirat,et al.  Single-input four-output voltage-mode universal filter using single DDCCTA , 2013, Microelectron. J..

[18]  Neeta Pandey,et al.  Realization of CDTA based frequency agile filter , 2013, 2013 IEEE International Conference on Signal Processing, Computing and Control (ISPCC).

[19]  Montree Siripruchyanun,et al.  3 Input/ 2 Output Current-Mode Universal Biquad Filter Using Single DO-CCCDTA , 2007 .

[20]  Muhammad Taher Abuelma’atti,et al.  New current-feedack operational-amplifier based shadow filters , 2016 .

[21]  Erkan Yüce,et al.  A New DVCC+ Based Second-Order Current-Mode Universal Filter Consisting of Only Grounded Capacitors , 2017, J. Circuits Syst. Comput..

[22]  Hakan Kuntman,et al.  New Current-Mode Class 1 Frequency-Agile Filter for Multi Protocol GPS Application , 2015 .

[23]  Ahmed M. Soliman,et al.  New high accuracy CMOS current conveyors , 2005 .

[24]  Neeta Pandey,et al.  OTRA based shadow filters , 2015, 2015 Annual IEEE India Conference (INDICON).

[25]  Suhash Chandra Dutta Roy.  ‘Shadow’ Filters—A New Family of Electronically Tunable Filters , 2010 .

[26]  Shahram Minaei,et al.  Electronically controllable bandpass filters with high quality factor and reduced capacitor value: An additional approach , 2016 .

[27]  Jiun-Wei Horng,et al.  Voltage-Mode Highpass, Bandpass, Lowpass and Notch Biquadratic Filters Using Single DDCC , 2012 .

[28]  Neeta Pandey,et al.  Design of CDTA and VDTA Based Frequency Agile Filters , 2014 .

[29]  Erkan Yuce,et al.  Grounded capacitor based fully cascadable electronically tunable current-mode universal filter , 2017 .

[30]  Worapong Tangsrirat,et al.  Voltage-mode universal filter with one input and five outputs using DDCCTAs and all-grounded passive components , 2012, Microelectron. J..

[31]  Hua-Pin Chen,et al.  Voltage-mode biquadratic filters using single DDCCTA , 2016 .

[32]  Shahram Minaei,et al.  All-Grounded Passive Elements Voltage-Mode DVCC-Based Universal Filters , 2010, Circuits Syst. Signal Process..

[33]  Dalibor Biolek,et al.  High Input Impedance Voltage-Mode Biquad Filter Using VD-DIBAs , 2014 .

[34]  Winai Jaikla,et al.  Five-inputs single-output voltage mode universal filter with high input and low output impedance using VDDDAs , 2017 .

[35]  Montree Kumngern,et al.  Cascadable independently and electronically tunable voltage-mode universal filter with grounded passive components , 2018 .

[36]  Costas Psychalinos,et al.  Multiple-input single-output universal biquad filter using single output operational transconductance amplifiers , 2018 .

[37]  Erkan Yüce,et al.  Two lossy integrator loop based current-mode electronically tunable universal filter employing only grounded capacitors , 2017, Microelectron. J..

[38]  Chunhua Wang,et al.  Current Differencing Cascaded Transconductance Amplifier (CDCTA) and Its Applications on Current-Mode nth-Order Filters , 2013, Circuits Syst. Signal Process..

[39]  Kamel Besbes,et al.  MISO current mode bi-quadratic filter employing high performance inverting second generation current conveyor circuit , 2017 .

[40]  Hakan Kuntman,et al.  MOSFET-Only filter design automation based on polynomial regression with exemplary circuits , 2018 .

[41]  Farid Temcamani,et al.  High-q and high-frequency current-mode bandpass active-filter based on simplified CCCIIs , 2017, 2017 International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS).

[42]  Deva Nand,et al.  New Configuration for OFCC-Based CM SIMO Filter and its Application as Shadow Filter , 2018 .

[43]  Tajinder Singh Arora,et al.  Current mode universal filter employing operational transconductance amplifier and third generation current conveyor , 2016, 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES).

[44]  Roman Sotner,et al.  High input impedance voltage-mode universal filter and its modification as quadrature oscillator using VDDDAs , 2017 .

[45]  Winai Jaikla,et al.  Single-input multiple-output voltage-mode shadow filter based on VDDDAs , 2019 .

[46]  Jiun-Wei Horng.  High output impedance current-mode universal biquadratic filters with five inputs using multi-output CCIIs , 2011, Microelectron. J..

[47]  Yongan Li,et al.  A new single MCCCDTA based Wien-bridge oscillator with AGC , 2012 .

[48]  Data Ram Bhaskar,et al.  Universal Current-Mode Biquad Filter Using a VDTA , 2013 .

[49]  Yongan Li.  A Modified CDTA (MCDTA) and Its Applications: Designing Current-Mode Sixth-Order Elliptic Band-Pass Filter , 2011, Circuits Syst. Signal Process..

[50]  Alain Fabre,et al.  On the frequency limitations of the circuits based on second generation current conveyors , 1995 .