Thin film removal mechanisms in ns-laser processing of photovoltaic materials

Abstract The removal of thin films widely used in photovoltaics (amorphous silicon, tin oxide, zinc oxide, aluminum, and molybdenum) is studied experimentally using multi-kHz Q-switched solid-state lasers at 532 nm and 1064 nm wavelengths. The processing (“scribing”) is performed through the film-supporting glass plate at scribing speeds of the order of m/s. The dependence of the film removal threshold on the laser pulse duration (8 ns to 40 ns) is investigated and the results are complemented by a multi-layer thermal model used for numerical simulations of the laser-induced spatio-temporal temperature field within the samples. Possible film removal mechanisms are discussed upon consideration of optical, geometrical, thermal and mechanical properties of the layers.

[1]  M. Gower,et al.  Industrial applications of laser micromachining. , 2000, Optics express.

[2]  W. Martienssen,et al.  Springer handbook of condensed matter and materials data , 2005 .

[3]  Guy Beaucarne,et al.  Back‐contact solar cells: a review , 2006 .

[4]  Jörg Krüger,et al.  Femtosecond laser damage of a high reflecting mirror , 2002 .

[5]  Eric Fogarassy,et al.  A thermal description of the melting of c- and a-silicon under pulsed excimer lasers , 1989 .

[6]  Jean-François Molinari,et al.  On the rate-dependency of dynamic tensile strength of a model ceramic system , 2005 .

[7]  C. Choy,et al.  Tensile strength of zinc oxide films measured by a microbridge method , 2003 .

[8]  M. Fuchs.  Optical properties of liquid silicon: the integral equation approach , 2000 .

[9]  Alvin D. Compaan,et al.  Laser scribing of polycrystalline thin films , 2000 .

[10]  Juergen Jandeleit,et al.  Picosecond laser ablation of thin copper films , 1996 .

[11]  Razvan Stoian,et al.  Dynamics of femtosecond laser induced voidlike structures in fused silica , 2009 .

[12]  J. Bonse,et al.  Femtosecond- and nanosecond-pulse laser ablation of bariumalumoborosilicate glass , 1999 .

[13]  Remo Guidieri.  Res , 1995, RES: Anthropology and Aesthetics.

[14]  Heinz P. Huber,et al.  Selective ablation of thin Mo and TCO films with femtosecond laser pulses for structuring thin film solar cells , 2007 .

[15]  Nadezhda M. Bulgakova,et al.  Energy balance of pulsed laser ablation: thermal model revised , 2004 .

[16]  J. P. Espinós,et al.  SnO2 thin films prepared by ion beam induced CVD : preparation and characterization by X-ray absorption spectroscopy , 1999 .

[17]  Jean-François Guillemoles,et al.  Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers , 2006 .

[18]  Klaus Zimmer,et al.  Etching of CuInSe2 thin films-comparison of femtosecond and picosecond laser ablation , 2005 .

[19]  B. Luk’yanchuk,et al.  Influence of thermal diffusion on the laser ablation of thin polymer films , 2008 .

[20]  M. E. Straumanis,et al.  Handbook of the Physicochemical Properties of the Elements , 1968 .

[21]  N. Bulgakova,et al.  Nonequilibrium magnetization dynamics of gadolinium studied by magnetic linear dichroism in time-resolved 4f core-level photoemission. , 2008, Physical review letters.

[22]  M. Ferenets,et al.  Thin Solid Films , 2010 .

[23]  Martin A. Green,et al.  Beneficial and constraining effects of laser scribing in buried‐contact solar cells , 1997 .

[24]  Alexandre A. Radzig,et al.  Handbook of Physical Quantities , 1997 .

[25]  J. Rabier,et al.  Low Temperature, High Stress Plastic Deformation of Semiconductors: The Silicon Case , 2000 .

[26]  D. Bäuerle.  Laser Processing and Chemistry , 1996 .

[27]  M. Stuke,et al.  Femtosecond uv excimer laser ablation , 1987 .

[28]  D. Lynch,et al.  Handbook of Optical Constants of Solids , 1985 .

[29]  Toshiyuki Tsuchiya,et al.  Cross comparison of thin-film tensile-testing methods examined using single-crystal silicon, polysilicon, nickel, and titanium films , 2005 .

[30]  Nadezhda M. Bulgakova,et al.  Thermoelastic modeling of microbump and nanojet formation on nanosize gold films under femtosecond laser irradiation , 2006 .

[31]  Seiichi Kiyama,et al.  Laser Patterning Method for Integrated Type a-Si Solar Cell Submodules , 1986 .

[32]  J. Liu.  Simple technique for measurements of pulsed Gaussian-beam spot sizes. , 1982, Optics letters.

[33]  Kamil Postava,et al.  Spectroscopic ellipsometry of epitaxial ZnO layer on sapphire substrate , 2000 .

[34]  Andrew G. Glen,et al.  APPL , 2001 .

[35]  I. Malitson.  Interspecimen Comparison of the Refractive Index of Fused Silica , 1965 .

[36]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[37]  Helmut Stiebig,et al.  High speed laser processing for monolithical series connection of silicon thin‐film modules , 2008 .

[38]  D F Farson,et al.  Direct-write patterning of indium-tin-oxide film by high pulse repetition frequency femtosecond laser ablation. , 2007, Applied optics.