Development of a new driller system to prevent the osteonecrosis in orthopedic surgery applications

[1]  Christian Krettek,et al.  Temperature control with internally applied cooling in solid material drilling: an experimental, biomechanical study , 2013, International Orthopaedics.

[2]  Yoed Rabin,et al.  An experimental investigation on thermal exposure during bone drilling. , 2012, Medical engineering & physics.

[3]  Federico Hernández-Alfaro,et al.  Thermal changes and drill wear in bovine bone during implant site preparation. A comparative in vitro study: twisted stainless steel and ceramic drills. , 2012, Clinical oral implants research.

[4]  Francisco Javier Gil,et al.  Comparative study on AISI 440 and AISI 420B stainless steel for dental drill performance , 2012 .

[5]  Bunyamin Aksakal,et al.  Influence of drill parameters on bone temperature and necrosis: A FEM modelling and in vitro experiments , 2012 .

[6]  G. Augustin,et al.  Cortical bone drilling and thermal osteonecrosis. , 2012, Clinical biomechanics.

[7]  Danko Brezak,et al.  Temperature changes during cortical bone drilling with a newly designed step drill and an internally cooled drill , 2012, International Orthopaedics.

[8]  İrfan Ucun,et al.  Numerical simulation of orthogonal machining process using multilayer and single-layer coated tools , 2011 .

[9]  Yuan-Kun Tu,et al.  The Effects of Drilling Parameters on Bone Temperatures: A Finite Element Simulation , 2011, 2011 5th International Conference on Bioinformatics and Biomedical Engineering.

[10]  Vadim V. Silberschmidt,et al.  Thermal analysis of orthogonal cutting of cortical bone using finite element simulations , 2010 .

[11]  Wei Ouyang,et al.  Drilling and microfracture lead to different bone structure and necrosis during bone‐marrow stimulation for cartilage repair , 2009, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[12]  Vadim V. Silberschmidt,et al.  Finite element analysis of forces of plane cutting of cortical bone , 2009 .

[13]  Mamoru Mitsuishi,et al.  Dynamic controlled milling process for bone machining , 2009 .

[14]  Toma Udiljak,et al.  Thermal osteonecrosis and bone drilling parameters revisited , 2007, Archives of Orthopaedic and Trauma Surgery.

[15]  A Scarano,et al.  Effects of Bur Wear during Implant Site Preparation: An in Vitro Study , 2007, International journal of immunopathology and pharmacology.

[16]  Man Yong Choi,et al.  Monitoring of Bone Temperature during Osseous Preparation for Orthodontic Micro-Screw Implants: Effect of Motor Speed and Ressure , 2006 .

[17]  Paul Mativenga,et al.  Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining , 2006 .

[18]  Indrajit Mukherjee,et al.  A review of optimization techniques in metal cutting processes , 2006, Comput. Ind. Eng..

[19]  Ramsey F. Hamade,et al.  Extracting cutting force coefficients from drilling experiments , 2006 .

[20]  J Fanghänel,et al.  The use of ceramic drills on a zirconium oxide basis in bone preparation. , 2006, Folia morphologica.

[21]  A. K. Balaji,et al.  AN ‘EFFECTIVE CUTTING TOOL THERMAL CONDUCTIVITY’ BASED MODEL FOR TOOL–CHIP CONTACT IN MACHINING WITH MULTI-LAYER COATED CUTTING TOOLS , 2002 .

[22]  Carl E Misch,et al.  Heat generation during implant drilling: the significance of motor speed. , 2002, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[23]  Richard E. DeVor,et al.  Modeling chip-evacuation forces and prediction of chip-clogging in drilling , 2002 .

[24]  P Missika,et al.  Optimal implant stabilization in low density bone. , 2001, Clinical oral implants research.

[25]  Yeh-Liang Hsu,et al.  A MODULAR MECHATRONIC SYSTEM FOR AUTOMATIC BONE DRILLING , 2001 .

[26]  M T Rondina,et al.  The effects of drilling force on cortical temperatures and their duration: an in vitro study. , 2000, Medical engineering & physics.

[27]  H. Townsend,et al.  Effect of feed rate and drill speed on temperatures in equine cortical bone. , 1999, American journal of veterinary research.

[28]  Benedetto Allotta,et al.  A hand-held drilling tool for orthopedic surgery , 1997 .

[29]  Eiji Shamoto,et al.  Prediction of Shear Angle in Oblique Cutting With Maximum Shear Stress and Minimum Energy Principles , 1997, Manufacturing Science and Engineering: Volume 1.

[30]  J. Dowell,et al.  Orthopaedic bone drills-can they be improved? Temperature changes near the drilling face. , 1996, The Journal of bone and joint surgery. British volume.

[31]  P. Christel,et al.  The effect of drilling parameters on bone , 1994 .

[32]  L. S. Matthews,et al.  The thermal effects of skeletal fixation-pin insertion in bone. , 1984, The Journal of bone and joint surgery. American volume.

[33]  J A Albright,et al.  Surgical drilling: design and performance of an improved drill. , 1982, Journal of biomechanical engineering.

[34]  M H Pope,et al.  A study of the bone machining process-orthogonal cutting. , 1974, Journal of biomechanics.

[35]  L. S. Matthews,et al.  Temperatures measured in human cortical bone when drilling. , 1972, The Journal of bone and joint surgery. American volume.

[36]  E R COSTICH,et al.  A STUDY OF THE EFFECTS OF HIGH-SPEED ROTARY INSTRUMENTS ON BONE REPAIR IN DOGS. , 1964, Oral surgery, oral medicine, and oral pathology.

[37]  G. V. Stabler.  The Fundamental Geometry of Cutting Tools , 1951 .

[38]  Matthias Kern,et al.  Influence of the drill material and method of cooling on the development of intrabony temperature during preparation of the site of an implant. , 2013, The British journal of oral & maxillofacial surgery.

[39]  Zbigniew Paszenda,et al.  Numerical and experimental analyses of drills used in osteosynthesis. , 2011, Acta of bioengineering and biomechanics.

[40]  Toshiaki Hara,et al.  The Effect of Drill Design Elements on Drilling Characteristics when Drilling Bone , 2010 .

[41]  Zbigniew Paszenda,et al.  Biomechanical Behaviour of Surgical Drills in Simulated Conditions of Drilling in a Bone , 2010 .

[42]  Girolamo Garreffa,et al.  An alternative method to record rising temperatures during dental implant site preparation: a preliminary study using bovine bone. , 2010, Annali dell'Istituto superiore di sanita.

[43]  Zbigniew Paszenda,et al.  FEM analysis of drills used in bone surgery , 2009 .

[44]  Yuan-Kun Tu,et al.  Finite element modeling of kirschner pin and bone thermal contact during drilling , 2009 .

[45]  Toma Udiljak,et al.  Determination of spatial distribution of increase in bone temperature during drilling by infrared thermography: preliminary report , 2008, Archives of Orthopaedic and Trauma Surgery.

[46]  Akira Hosokawa,et al.  Temperature Measurement of Cutting Edge in Drilling -Effect of Oil Mist- , 2007 .

[47]  Eduardo Anitua,et al.  A novel drilling procedure and subsequent bone autograft preparation: a technical note. , 2007, The International journal of oral & maxillofacial implants.

[48]  Shin'ichi Warisawa,et al.  Determination of the Machining Characteristics of a Biomaterial Using a Machine Tool Designed for Total Knee Arthroplasty , 2004 .

[49]  T. Özel,et al.  Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting , 2000 .

[50]  M. T. Hillerya,et al.  Temperature effects in the drilling of human and bovine bone , 1999 .

[51]  C. Piconi,et al.  Zirconia as a ceramic biomaterial. , 1999, Biomaterials.

[52]  D. F. James,et al.  Measurements of shaft speed while drilling through bone. , 1995, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[53]  T Albrektsson,et al.  Heat caused by drilling cortical bone. Temperature measured in vivo in patients and animals. , 1984, Acta orthopaedica Scandinavica.

[54]  G. H. Farnworth,et al.  Optimization of Drill Geometry for Orthopaedic Surgery , 1975 .

[55]  C. Hirsch,et al.  Factors affecting the determination of the physical properties of femoral cortical bone. , 1966, Acta orthopaedica Scandinavica.