New set-up for in-plane permeability measurement

The determination of accurate permeability values is critical to process simulations for Resin Transfer Molding (RTM). New instrumentation is presented in this paper for high throughput permeability measurements. The design extends the original work of Hoes [Hoes K. Development of a new sensor-based set-up for experimental permeability identification of fibrous media, PhD thesis, Vrije Universiteit Brussels, Brussels, 2003] with a new sensor design, a much larger sensor pattern, and new analysis software. For example, the new analysis software is more robust than previous versions in that it will compute the flow front orientation angle rather than assume the angle as given by the user. The new set-up was used to measure the permeability of a basalt woven 3/1 twill fabric. When compared with previous work on 2/2 twill and plain woven fabrics, a relationship was observed between the breadth of the anisotropy distribution, the correlation between the principle components of the permeability tensor, and the fabric structure. Such a relationship has implications for manufacturing reliability, and may help explain why some fabrics process much more consistently than others.

[1]  Joy P. Dunkers,et al.  The prediction of permeability for an epoxy/E‐glass composite using optical coherence tomographic images , 2001 .

[2]  Ludwig Rebenfeld,et al.  In-Plane Flow of Fluids in Fabrics: Structure/Flow Characterization , 1987 .

[3]  Paolo Ermanni,et al.  Dependence of the 1-D permeability of fibrous media on the fibre volume content: Comparison between measurement and simulation , 1998 .

[4]  Takaji Inamuro,et al.  Lattice Boltzmann simulation of flows in a three‐dimensional porous structure , 1999 .

[5]  POWER-LAW FLUIDS IN POROUS MEDIA , 1987 .

[6]  Ignace Verpoest,et al.  Pore network modeling of permeability for textile reinforcements , 2003 .

[7]  S. Advani,et al.  On-Line Characterization of Bulk Permeability and Race-Tracking During the Filling Stage in Resin Transfer Molding Process , 2003 .

[8]  Alfred C. Loos,et al.  The Effects of Fluid Type and Viscosity on the Steady-State and Advancing Front Permeability Behavior of Textile Preforms , 1997 .

[9]  F. Dullien.  Porous Media: Fluid Transport and Pore Structure , 1979 .

[10]  Suresh G. Advani,et al.  Permeability characterization. Part 1: A proposed standard reference fabric for permeability , 1995 .

[11]  Sandro Campos Amico,et al.  An experimental study of the permeability and capillary pressure in resin-transfer moulding , 2001 .

[12]  R. Parnas,et al.  A comparison of the unidirectional and radial in-plane flow of fluids through woven composite reinforcements , 1993 .

[13]  Rikard Gebart,et al.  Measurement of in-plane permeability of anisotropic fiber reinforcements , 1996 .

[14]  Ludwig Rebenfeld,et al.  Radial penetration of a viscous liquid into a planar anisotropic porous medium , 1988 .

[15]  François Trochu,et al.  Permeability measurement and flow simulation through fiber reinforcement , 1996 .

[16]  Suresh G. Advani,et al.  Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot prediction , 1996 .

[17]  Resin Transfer Moulding for Aerospace Structures , 1998 .

[18]  D. Kleinbaum,et al.  Applied Regression Analysis and Other Multivariate Methods , 1978 .

[19]  Constantina Lekakou,et al.  Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding , 1996 .

[20]  François Trochu,et al.  Concurrent methods for permeability measurement in resin transfer molding , 1996 .

[21]  H. Partanen,et al.  In-plane permeability measurements: a nordic round-robin study , 2000 .

[22]  Chuck Zhang,et al.  Statistical characterization of fiber permeability for composite manufacturing , 2000 .

[23]  Christophe Binetruy,et al.  The interactions between flows occurring inside and outside fabric tows during RTM , 1997 .

[24]  Suresh G. Advani,et al.  EXPERIMENTAL INVESTIGATION OF TRANSVERSE FLOW THROUGH ALIGNED CYLINDERS , 1995 .

[25]  Vistasp M. Karbhari,et al.  Experimental characterization of permeability and fibre wetting for liquid moulding , 1995 .

[26]  C. Rudd,et al.  Material characterization for flow modeling in structural reaction injection molding , 1996 .

[27]  R. Parnas.  Liquid Composite Molding , 2000 .

[28]  G. Neale,et al.  Practical significance of brinkman's extension of darcy's law: Coupled parallel flows within a channel and a bounding porous medium , 1974 .

[29]  Constantina Lekakou,et al.  Mathematical modelling of macro- and micro-infiltration in resin transfer moulding (RTM) , 1998 .