The effects of job rotation on the risk of reporting low back pain

Job rotation has been widely recommended as an administrative control to reduce the risk of developing work-related musculoskeletal disorders. However, evidence of its benefits are hard to find in the literature. The effect of job rotation on predictions for the risk of reporting low back pain was estimated using Low Back Pain Reporting (LBPR) and Time Weighted Average (TWA) approaches. Index scores calculated using the peak hand force, the peak L4/L5 shear force and the L4/L5 moment cumulated over the entire shift were used to estimate the effects of job rotation on the probability of reporting low back pain. Simulations of realistic rotations between two jobs showed that workers in low demand jobs who rotate into higher demand jobs experience a linear increase in reporting probability using the TWA approach. With the LBPR approach a step increase in reporting probability occurred because of the immediate exposure to the peak loading parameters associated with the more demanding job. With a 50-50 rotation the TWA and LBPR index scores increased by 39% and 57%, respectively. With the LBPR approach the redistribution of risk was not uniform with job rotation. The increase was greater for those who rotated into the demanding job compared to the reduction experienced by those who rotated out of the demanding job. The effects of job rotation are not easily estimated because of the complex effect that mixing jobs has on peak and cumulative tissue loading.

[1]  B Jonsson,et al.  Electromyographic studies of job rotation. , 1988, Scandinavian journal of work, environment & health.

[2]  R W Norman,et al.  Biomechanical and psychosocial risk factors for low back pain at work. , 2001, American journal of public health.

[3]  Vern Putz-Anderson,et al.  Cumulative trauma disorders : a manual for musculoskeletal diseases of the upper limbs , 1988 .

[4]  Marilyn F. Hallock,et al.  Exposure Assessment for Epidemiology: Characteristics of Exposure , 1991 .

[5]  Alwin Luttmann,et al.  Lumbar load during one-handed bricklaying , 1991 .

[6]  Laura Punnett,et al.  Ergonomic Job Analysis: A Structured Approach for Identifying Risk Factors Associated with Overexertion Injuries and Disorders , 1991 .

[7]  L. Hazzard,et al.  Job rotation cuts cumulative trauma cases , 1992 .

[8]  A Yassi,et al.  Modernization of a laundry processing plant: is it really an improvement? , 1993, Applied ergonomics.

[9]  Y. K. Liu,et al.  Fatigue Life Improvement of Nitrogen‐Ion–Implanted Pedicle Screws , 1990, Spine.

[10]  W. Patrick Neumann,et al.  The accuracy of self-report and trained observer methods for obtaining estimates of peak load information during industrial work , 1997 .

[11]  T. Keller,et al.  Mechanical behavior of the human lumbar spine. II. Fatigue strength during dynamic compressive loading , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[12]  H C Kemper,et al.  Job rotation as a factor in reducing physical workload at a refuse collecting department. , 1999, Ergonomics.

[13]  Ekkehart Frieling,et al.  Comparison of different organisations of assembly work in the European automotive industry , 1997 .

[14]  David A. Soto-quijano,et al.  Work-Related Musculoskeletal Disorders of the Upper Extremity , 2005 .

[15]  M. Adams,et al.  Gradual Disc Prolapse , 1985, Spine.

[16]  J. D. G. Troup,et al.  Lumbar Spinal Pathology in Cadaveric Material in Relation to History of Back Pain, Occupation, and Physical Loading , 1990 .

[17]  C Gaudart,et al.  Conditions for maintaining ageing operators at work--a case study conducted at an automobile manufacturing plant. , 2000, Applied ergonomics.

[18]  Richard Wells,et al.  Ergonomic Interventions for Reducing Musculoskeletal Disorders : An Overview , Related Issues and Future Directions , 1998 .

[19]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[20]  Thomas J. Miceli,et al.  Job Rotation: Cost, Benefits, and Stylized Facts , 1999 .

[21]  Katharyn A. Grant,et al.  Ergonomics: Lifting Hazards at a Cabinet Manufacturing Company: Evaluation and Recommended Controls , 1997 .