Influence of charge carrier injection on the device performance of blue organic light-emitting diodes

Multilayer organic light-emitting diodes with a well-defined emission region are ideal systems to investigate the underlying mechanisms of device operation. In this paper we give a brief overview of our studies on the injection and recombination processes in blue organic light-emitting diodes. Our diodes consist of copper phthalocyanine as the hole- injection/buffer layer, the aromatic diamine N,N'- di(naphthalene-1-yl)-N,N'-diphenyl-benzidine as the hole- transport layer, a distyrylarylene derivative as the emitting layer, tris(8-hydroxy-quinoline)aluminum as the electron- injection/transport layer sandwiched between indium tin oxide (ITO) as the transparent hole injector, and low work-function metals as the electron-injecting electrode. To reveal the limiting mechanisms in device operation we investigated the influence of different anode (ITO, optimized ITO) and cathode materials (Mg:Ag, Ca, LiF/Mg:Ag) as well as different layer thicknesses on the device characteristics. These investigations revealed that the device characteristics in the low and medium voltage range are determined by the injection properties of the electrodes, whereas at higher voltages (i.e. at higher current densities) a transition from an electrode- limited injection to a bulk-limited conduction process is detectable.

[1]  William R. Salaneck,et al.  Electronic and chemical structure of conjugated polymers and their interfaces: experiment, theory and a glance toward the future , 1994 .

[2]  Stephen R. Forrest,et al.  Electroluminescence from trap‐limited current transport in vacuum deposited organic light emitting devices , 1994 .

[3]  Katsutoshi Nagai,et al.  Multilayer White Light-Emitting Organic Electroluminescent Device , 1995, Science.

[4]  Ching Wan Tang,et al.  Organic electroluminescent devices with improved stability , 1996 .

[5]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[6]  Tetsuo Tsutsui,et al.  Blue light‐emitting organic electroluminescent devices , 1990 .

[7]  Homer Antoniadis,et al.  Effects of hole carrier injection and transport in organic light-emitting diodes , 1997 .

[8]  Shigeo Fujita,et al.  Surface Treatment of Indium-Tin-Oxide Substrates and Its Effects on Initial Nucleation Processes of Diamine Films , 1997 .

[9]  Tadashi Kusumoto,et al.  Highly efficient blue electroluminescence from a distyrylarylene emitting layer with a new dopant , 1995 .

[10]  M. Matsumura,et al.  Height of the energy barrier existing between cathodes and hydroxyquinoline-aluminum complex of organic electroluminescence devices , 1996 .

[11]  Chishio Hosokawa,et al.  Organic multi-color electroluminescence display with fine pixels , 1997 .

[12]  C. Tang,et al.  Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode , 1997 .