A continuum description of the damage process in the arterial wall of abdominal aortic aneurysms

In the present work, we develop a three-dimensional isotropic finite-strain damage model for abdominal aortic aneurysm (AAA) wall that considers both the characteristic softening of the material caused by damage and the spatial variation of the material properties. A strain energy function is formulated that accounts for a hyperelastic, slightly compressible, isotropic material behavior during the elastic phase, whereas the damage process only contributes to the material response when the elastic limit of the AAA wall is exceeded. Material and damage parameters are obtained by fitting the strain energy function to the experimental data obtained by uniaxial tensile tests of freshly harvested AAA wall samples. The damage model extends the validity of the material law to a strain range of up to 50%. Purely elastic material laws for AAA wall are only valid for a strain range of up to 17%. In a series of finite element simulations of patient-specific AAAs, serving as numerical examples, we investigate the applicability of the damage model. The use of the damage model does not yield a more distinct identification of rupture-prone AAAs than other computational-based risk indices. However, the benefit of the finite-strain damage model is the potential capability to trigger growth and remodeling processes in mechanobiological models.

[1]  Gerhard A Holzapfel,et al.  Computational stress-deformation analysis of arterial walls including high-pressure response. , 2007, International journal of cardiology.

[2]  Christian Reeps,et al.  The impact of model assumptions on results of computational mechanics in abdominal aortic aneurysm. , 2010, Journal of vascular surgery.

[3]  D. Vorp,et al.  Biomechanics of abdominal aortic aneurysm. , 2007, Journal of biomechanics.

[4]  M L Raghavan,et al.  Toward a biomechanical tool to evaluate rupture potential of abdominal aortic aneurysm: identification of a finite strain constitutive model and evaluation of its applicability. , 2000, Journal of biomechanics.

[5]  J Swedenborg,et al.  Biomechanical rupture risk assessment of abdominal aortic aneurysms: model complexity versus predictability of finite element simulations. , 2010, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[6]  W A Wall,et al.  Impact of calcifications on patient-specific wall stress analysis of abdominal aortic aneurysms , 2010, Biomechanics and modeling in mechanobiology.

[7]  Thoralf M. Sundt,et al.  Mechanical Properties of Dilated Human Ascending Aorta , 2002, Annals of Biomedical Engineering.

[8]  W. Wall,et al.  A Comparison of Diameter, Wall Stress, and Rupture Potential Index for Abdominal Aortic Aneurysm Rupture Risk Prediction , 2010, Annals of Biomedical Engineering.

[9]  J Swedenborg,et al.  The impact of intraluminal thrombus failure on the mechanical stress in the wall of abdominal aortic aneurysms. , 2011, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[10]  David A. Vorp,et al.  Towards A Noninvasive Method for Determination of Patient-Specific Wall Strength Distribution in Abdominal Aortic Aneurysms , 2006, Annals of Biomedical Engineering.

[11]  S. Doll,et al.  On the Development of Volumetric Strain Energy Functions , 2000 .

[12]  G. Moneta,et al.  Comparison of Endovascular Aneurysm Repair With Open Repair in Patients With Abdominal Aortic Aneurysm (EVAR Trial 1), 30-Day Operative Mortality Results: Randomised Controlled Trial , 2006 .

[13]  R Vanderby,et al.  A structurally based stress-stretch relationship for tendon and ligament. , 1997, Journal of biomechanical engineering.

[14]  Sanjay Govindjee,et al.  A micro-mechanically based continuum damage model for carbon black-filled rubbers incorporating Mullins' effect , 1991 .

[15]  M. Thubrikar,et al.  Mechanical properties of abdominal aortic aneurysm wall , 2001, Journal of medical engineering & technology.

[16]  Mark F Fillinger,et al.  Prediction of rupture risk in abdominal aortic aneurysm during observation: wall stress versus diameter. , 2003, Journal of vascular surgery.

[17]  C. Kleinstreuer,et al.  Invariant-based anisotropic constitutive models of the healthy and aneurysmal abdominal aortic wall. , 2009, Journal of biomechanical engineering.

[18]  W. Wall,et al.  Truly monolithic algebraic multigrid for fluid–structure interaction , 2011 .

[19]  W A Wall,et al.  Prestressing in finite deformation abdominal aortic aneurysm simulation. , 2009, Journal of biomechanics.

[20]  B Calvo,et al.  On modelling damage process in vaginal tissue. , 2009, Journal of biomechanics.

[21]  J. Weiss,et al.  Finite element implementation of incompressible, transversely isotropic hyperelasticity , 1996 .

[22]  Per Eriksson,et al.  Influence of intraluminal thrombus on structural and cellular composition of abdominal aortic aneurysm wall. , 2003, Journal of vascular surgery.

[23]  J. C. Simo,et al.  Associated coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation , 1992 .

[24]  Manuel Doblaré,et al.  Finite element implementation of a stochastic three dimensional finite-strain damage model for fibrous soft tissue , 2008 .

[25]  Gerhard A. Holzapfel,et al.  A Numerical Model to Study the Interaction of Vascular Stents with Human Atherosclerotic Lesions , 2007, Annals of Biomedical Engineering.

[26]  Wolfgang A. Wall,et al.  Coupling strategies for biomedical fluid–structure interaction problems , 2010 .

[27]  Konstantin Y. Volokh,et al.  Hyperelasticity with softening for modeling materials failure , 2007 .

[28]  D. Vorp,et al.  The effects of aneurysm on the biaxial mechanical behavior of human abdominal aorta. , 2006, Journal of biomechanics.

[29]  T Christian Gasser,et al.  Failure properties of intraluminal thrombus in abdominal aortic aneurysm under static and pulsating mechanical loads. , 2008, Journal of vascular surgery.

[30]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[31]  Jonathan P Vande Geest,et al.  Biomechanical determinants of abdominal aortic aneurysm rupture. , 2005, Arteriosclerosis, thrombosis, and vascular biology.

[32]  Y C Fung,et al.  Compressibility and constitutive equation of arterial wall in radial compression experiments. , 1984, Journal of biomechanics.

[33]  P. Flory,et al.  Thermodynamic relations for high elastic materials , 1961 .

[34]  M. Webster,et al.  Ex vivo biomechanical behavior of abdominal aortic aneurysm: Assessment using a new mathematical model , 1996, Annals of Biomedical Engineering.

[35]  D. R. J. Owen,et al.  Continuum modelling and numerical simulation of material damage at finite strains , 1998 .

[36]  Manuel Doblaré,et al.  An uncoupled directional damage model for fibred biological soft tissues. Formulation and computational aspects , 2007 .

[37]  Ender A. Finol,et al.  Quantitative Assessment of Abdominal Aortic Aneurysm Geometry , 2010, Annals of Biomedical Engineering.

[38]  J D Humphrey,et al.  A constrained mixture model for arterial adaptations to a sustained step change in blood flow , 2003, Biomechanics and modeling in mechanobiology.

[39]  Elena S. Di Martino,et al.  Three-dimensional geometrical characterization of abdominal aortic aneurysms: image-based wall thickness distribution. , 2009, Journal of biomechanical engineering.

[40]  J. C. Simo,et al.  On a fully three-dimensional finite-strain viscoelastic damage model: Formulation and computational aspects , 1987 .

[41]  Gerhard A. Holzapfel,et al.  A rate-independent elastoplastic constitutive model for biological fiber-reinforced composites at finite strains: continuum basis, algorithmic formulation and finite element implementation , 2002 .

[42]  S. Belkoff,et al.  A failure model for ligaments. , 1999, Journal of biomechanics.

[43]  Christian Miehe,et al.  Superimposed finite elastic–viscoelastic–plastoelastic stress response with damage in filled rubbery polymers. Experiments, modelling and algorithmic implementation , 2000 .

[44]  S. Yazdani,et al.  A constitutive model of the artery with damage , 1997 .

[45]  P N Watton,et al.  Evolving mechanical properties of a model of abdominal aortic aneurysm , 2009, Biomechanics and modeling in mechanobiology.

[46]  Manuel Doblaré,et al.  On finite‐strain damage of viscoelastic‐fibred materials. Application to soft biological tissues , 2008 .

[47]  Wolfgang A. Wall,et al.  A computational strategy for prestressing patient‐specific biomechanical problems under finite deformation , 2010 .

[48]  K Y Volokh,et al.  A model of growth and rupture of abdominal aortic aneurysm. , 2008, Journal of biomechanics.

[49]  D. Balzani Simulation of Deformation, Damage and Residual Stresses in Arterial Walls , 2008 .