A novel sensorless model control DC-DC converter

This paper presents a novel sensorless model control dc-dc converter. In the proposed method, the output current is predicted from the duty ratio and the output voltage in order to exclude the sensing resistor. Only the output voltage and the input voltage are detected. The transient characteristics in the proposed method without the current detection are compared to the existing proposed method and the conventional P-I-D control method. The bias value in the P-I-D is controlled based on the static model of dc-dc converter. The proposed method achieves a superior transient response compared to the P-I-D control. It is also confirmed that the proposed method without current sensing can achieve the good transient response as the digital control method using the output current sensing.

[1]  Fujio Kurokawa,et al.  A new quick transient response digital control dc-dc converter with smart bias function , 2011, 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC).

[2]  Fujio Kurokawa,et al.  Dynamic Characteristics of DC-DC Converters Using Digital Filters , 2009 .

[3]  Jiaqi Liang,et al.  Feed-forward transient compensation control for DFIG wind generators during both balanced and unbalanced grid disturbances , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[4]  Tadatoshi Babasaki,et al.  An auto-tuning digital control for buck-boost dc-dc converter , 2010, Intelec 2010.

[5]  Yan-Fei Liu,et al.  A practical control strategy to improve unloading transient response performance for buck converters , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[6]  D. G. Holmes,et al.  Enhanced Load Step Response for a Bidirectional DC–DC Converter , 2013, IEEE Transactions on Power Electronics.

[7]  S. Chattopadhyay,et al.  A Digital Current-Mode Control Technique for DC–DC Converters , 2006, IEEE Transactions on Power Electronics.

[8]  Fujio Kurokawa,et al.  A new STS model DC-DC converter , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  Praveen K. Jain,et al.  A Low-Complexity Dual-Voltage-Loop Digital Control Architecture With Dynamically Varying Voltage and Current References , 2014, IEEE Transactions on Power Electronics.

[10]  David J. Perreault,et al.  Integrated CMOS DC-DC converter with digital maximum power point tracking for a portable thermophotovoltaic power generator , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[11]  Michel Osee,et al.  A digital platform for real-time simulation of power converters with high switching frequency , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[12]  F. Kurokawa,et al.  Static and Dynamic Characteristics of DC-DC Converter Using a Digital Filter , 2009 .