Asymmetric Temperature Modulation for Extreme Fast Charging of Lithium-Ion Batteries
暂无分享,去创建一个
Shanhai Ge | Chao-Yang Wang | Donghai Wang | Teng Liu | Chaoyang Wang | X. Yang | Donghai Wang | Y. Leng | S. Ge | Yue Gao | Teng Liu | Yue Gao | Xiao Guang Yang | Yongjun Leng
[1] Yi Cui,et al. Challenges and opportunities towards fast-charging battery materials , 2019, Nature Energy.
[2] D. Wood,et al. Enabling fast charging of high energy density Li-ion cells with high lithium ion transport electrolytes , 2019, Electrochemistry Communications.
[3] Pontus Svens,et al. Fast-charging effects on ageing for energy-optimized automotive LiNi1/3Mn1/3Co1/3O2/graphite prismatic lithium-ion cells , 2019, Journal of Power Sources.
[4] Hansu Kim,et al. Improved fast charging capability of graphite anodes via amorphous Al2O3 coating for high power lithium ion batteries , 2019, Journal of Power Sources.
[5] Andrew M. Colclasure,et al. Requirements for Enabling Extreme Fast Charging of High Energy Density Li-Ion Cells while Avoiding Lithium Plating , 2019, Journal of The Electrochemical Society.
[6] Allen Pei,et al. Design of Red Phosphorus Nanostructured Electrode for Fast-Charging Lithium-Ion Batteries with High Energy Density , 2019, Joule.
[7] Donghai Wang,et al. Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions , 2019, Nature Materials.
[8] Gregory J. Offer,et al. How Observable Is Lithium Plating? Differential Voltage Analysis to Identify and Quantify Lithium Plating Following Fast Charging of Cold Lithium-Ion Batteries , 2019, Journal of The Electrochemical Society.
[9] J. Dahn,et al. Editors' Choice—Hindering Rollover Failure of Li[Ni0.5Mn0.3Co0.2]O2/Graphite Pouch Cells during Long-Term Cycling , 2019, Journal of The Electrochemical Society.
[10] Daniel P. Abraham,et al. Quantifying lithium concentration gradients in the graphite electrode of Li-ion cells using operando energy dispersive X-ray diffraction , 2019, Energy & Environmental Science.
[11] João Coelho,et al. Quantifying the factors limiting rate performance in battery electrodes , 2018, Nature Communications.
[12] Qiang Wu,et al. LiFePO4-Coated LiNi0.5Co0.2Mn0.3O2 Cathode Materials with Improved High Voltage Electrochemical Performance and Enhanced Safety for Lithium Ion Pouch Cells , 2019, Journal of The Electrochemical Society.
[13] Jiajun Wang,et al. Fabrication of Low‐Tortuosity Ultrahigh‐Area‐Capacity Battery Electrodes through Magnetic Alignment of Emulsion‐Based Slurries , 2018, Advanced Energy Materials.
[14] K. Gering,et al. A Critical Evaluation of the Advanced Electrolyte Model , 2018 .
[15] Chao-Yang Wang,et al. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries , 2018, Journal of Power Sources.
[16] Shanhai Ge,et al. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells , 2018, Journal of Power Sources.
[17] Shanhai Ge,et al. Fast charging of lithium-ion batteries at all temperatures , 2018, Proceedings of the National Academy of Sciences.
[18] Jun Lu,et al. Batteries and fuel cells for emerging electric vehicle markets , 2018 .
[19] Jeff Dahn,et al. Exploring Classes of Co-Solvents for Fast-Charging Lithium-Ion Cells , 2018 .
[20] Shuru Chen,et al. General Method of Manipulating Formation, Composition, and Morphology of Solid-Electrolyte Interphases for Stable Li-Alloy Anodes. , 2017, Journal of the American Chemical Society.
[21] Seok-Gwang Doo,et al. Graphene balls for lithium rechargeable batteries with fast charging and high volumetric energy densities , 2017, Nature Communications.
[22] James Francfort,et al. Enabling fast charging – Battery thermal considerations , 2017 .
[23] Richard Barney Carlson,et al. Enabling fast charging – A battery technology gap assessment , 2017 .
[24] T. Mallouk,et al. Interfacial Chemistry Regulation via a Skin-Grafting Strategy Enables High-Performance Lithium-Metal Batteries. , 2017, Journal of the American Chemical Society.
[25] Jaephil Cho,et al. Fast-charging high-energy lithium-ion batteries via implantation of amorphous silicon nanolayer in edge-plane activated graphite anodes , 2017, Nature Communications.
[26] Chaoyang Wang,et al. Modeling of lithium plating induced aging of lithium-ion batteries: Transition from linear to nonlinear aging , 2017 .
[27] Pulickel M. Ajayan,et al. A materials perspective on Li-ion batteries at extreme temperatures , 2017, Nature Energy.
[28] Jianming Zheng,et al. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries , 2017, Nature Energy.
[29] Chaoyang Wang,et al. Innovative heating of large-size automotive Li-ion cells , 2017 .
[30] Andreas Jossen,et al. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction , 2017 .
[31] Hubert A. Gasteiger,et al. Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries , 2017 .
[32] Tongchao Liu,et al. Aligned Li+ Tunnels in Core-Shell Li(NixMnyCoz)O2@LiFePO4 Enhances Its High Voltage Cycling Stability as Li-ion Battery Cathode. , 2016, Nano letters.
[33] Jessika E. Trancik,et al. Potential for widespread electrification of personal vehicle travel in the United States , 2016, Nature Energy.
[34] Yi Cui,et al. Promises and challenges of nanomaterials for lithium-based rechargeable batteries , 2016, Nature Energy.
[35] Chaoyang Wang,et al. Lithium-ion battery structure that self-heats at low temperatures , 2016, Nature.
[36] Xiaodong Chen,et al. Rational material design for ultrafast rechargeable lithium-ion batteries. , 2015, Chemical Society reviews.
[37] Simon F. Schuster,et al. Nonlinear aging characteristics of lithium-ion cells under different operational conditions , 2015 .
[38] J. C. Burns,et al. In-Situ Detection of Lithium Plating Using High Precision Coulometry , 2015 .
[39] M. Wohlfahrt‐Mehrens,et al. Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study , 2014 .
[40] Yuki Yamada,et al. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. , 2014, Journal of the American Chemical Society.
[41] Yuki Yamada,et al. A superconcentrated ether electrolyte for fast-charging Li-ion batteries. , 2013, Chemical communications.
[42] Matthew B. Pinson,et al. Theory of SEI Formation in Rechargeable Batteries: Capacity Fade, Accelerated Aging and Lifetime Prediction , 2012, 1210.3672.
[43] Feng Li,et al. Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates , 2012, Proceedings of the National Academy of Sciences.
[44] Xuemei Zhao,et al. A High Precision Coulometry Study of the SEI Growth in Li/Graphite Cells , 2011 .
[45] Marshall C. Smart,et al. Effects of Electrolyte Composition on Lithium Plating in Lithium-Ion Cells , 2011 .
[46] P. Novák,et al. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries , 2010 .
[47] P. Novák,et al. Colorimetric Determination of Lithium Content in Electrodes of Lithium-Ion Batteries , 2008 .
[48] T. Jow,et al. Solvation sheath of Li+ in nonaqueous electrolytes and its implication of graphite/ electrolyte interface chemistry , 2007 .
[49] T. L. Kulova,et al. Temperature effect on the lithium diffusion rate in graphite , 2006 .
[50] Lars Ole Valøen,et al. Transport Properties of LiPF6-Based Li-Ion Battery Electrolytes , 2005 .
[51] Ralph E. White,et al. Solvent Diffusion Model for Aging of Lithium-Ion Battery Cells , 2004 .