An adaptive tunable vibration absorber using a new magnetorheological elastomer for vehicular powertrain transient vibration reduction

During the transient stage of acceleration, the powertrain experiences a period of high level vibration because the engine speed passes through one or several powertrain natural frequencies. This paper presents a concept design of an adaptive tuned vibration absorber (ATVA) using a new magnetorheological elastomer (MRE) for powertrain transient vibration reduction. The MRE material used to develop the ATVA is a new one, which is synthesized from a highly elastic polymer and carbonyl iron particles of 3–5 and 40–50 µm. Under a magnetic field of 0.3 T, the MRE material has a giant increase, which is more than two orders, in both the storage and loss moduli. To facilitate the ATVA design, effective formulae for the storage modulus and loss factor were derived as explicit functions of the applied magnetic field density. With the derived formulae, ATVA parameters such as the stiffness and damping coefficients were converted effectively from the magnetic field density. Thus, the ATVA frequency can be tuned properly according to the excitation frequency. Numerical simulations of a powertrain system fitted with the ATVA were conducted to examine the ATVA proposed design. By using the MRE-based ATVA, the powertrain natural frequencies can be actively tuned far away from the resonant area of excitation frequency. Also, the time histories of powertrain frequencies depending on the magnetic field density before and after installing the ATVA have been compared to show that the resonant phenomena have been dealt with completely. As a result, the powertrain transient vibration response is significantly suppressed. In addition, the effect of the ATVA's moment of inertia, stiffness and damping on the ATVA's effectiveness during the transient stage was investigated to choose the ATVA's optimal parameters. The MRE-based ATVA will be a novel device for powertrain vibration control not only for the steady stage but also for transient vibration.

[1]  J. C. Wachel,et al.  Analysis Of Torsional Vibrations In Rotating Machinery. , 1993 .

[2]  Miklós Zrínyi,et al.  Novel highly elastic magnetic materials for dampers and seals: Part I. Preparation and characterization of the elastic materials , 2007 .

[3]  J. Der Hagopian,et al.  Vehicle driveline dynamic behaviour experimentation and simulation , 1998 .

[4]  Nong Zhang,et al.  The damping effect of magnetorheological elastomers on dynamic absorber for powertrain vibration reduction , 2009 .

[5]  Mehdi Farshad,et al.  Magnetoactive elastomer composites , 2004 .

[6]  Weihua Li,et al.  Effect of carbon black on the mechanical performances of magnetorheological elastomers , 2008 .

[7]  Alexei R. Khokhlov,et al.  Effect of a homogeneous magnetic field on the viscoelastic behavior of magnetic elastomers , 2007 .

[8]  M J Brennan.  Vibration control using a tunable vibration neutralizer , 1997 .

[9]  N. Gil-Negrete,et al.  Torsion stiffness of a rubber bushing: A simple engineering design formula including the amplitude dependence , 2007 .

[10]  P. Walsh,et al.  A variable stiffness vibration absorber for minimization of transient vibrations , 1992 .

[11]  John Matthew Ginder,et al.  Magnetorheological elastomers in tunable vibration absorbers , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Xinglong Gong,et al.  An effective permeability model to predict field-dependent modulus of magnetorheological elastomers , 2006 .

[13]  Alexei R. Khokhlov,et al.  Effect of a homogeneous magnetic field on the mechanical behavior of soft magnetic elastomers under compression , 2006 .

[14]  J. Carlson,et al.  A model of the behaviour of magnetorheological materials , 1996 .

[15]  Miklós Zrínyi,et al.  Novel highly elastic magnetic materials for dampers and seals: part II. Material behavior in a magnetic field , 2007 .

[16]  Alexander V. Chertovich,et al.  New Composite Elastomers with Giant Magnetic Response , 2010 .

[17]  J. Carlson,et al.  MR fluid, foam and elastomer devices , 2000 .

[18]  H. Du,et al.  A dynamic absorber with a soft magnetorheological elastomer for powertrain vibration suppression , 2009 .

[19]  G. Zhou,et al.  Shear properties of a magnetorheological elastomer , 2003 .

[20]  Kenneth A. Cunefare,et al.  Properties of a magnetorheological semi-active vibration absorber , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  R Manoj,et al.  Gear rattle modelling and analysis for automotive manual transmissions , 2001 .

[22]  Brian R. Mace,et al.  A tunable magneto-rheological fluid-filled beam-like vibration absorber , 2010 .

[23]  N. Hoang,et al.  A dual adaptive tunable vibration absorber using MREs for vehicle powertrain vibration control , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[24]  R G White,et al.  PRACTICAL APPLICATION OF THE RAPID FREQUENCY SWEEP TECHNIQUE FOR STRUCTURAL FREQUENCY RESPONSE MEASUREMENT , 1982 .

[25]  Kenneth A. Cunefare,et al.  Performance of MRE-based Vibration Absorbers , 2008 .

[26]  Ashley R. Crowther,et al.  A Finite Element Method for the Dynamic Analysis of Automatic Transmission Gear Shifting with a Four-Degree-of-Freedom Planetary Gearset Element , 2003 .

[27]  Tomi Lindroos,et al.  The elastic and damping properties of magnetorheological elastomers , 2006 .