论文信息 - Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section

Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section

The coupled bending and torsional natural frequencies of uniform elastic beams with arbitrary cross-section are studied using the finite element method. The special cases of cross-sectional symmetry in one or two perpendicular direction and negligible warping and rotary inertia effects can be treated readily by simply removing some of the entries of stiffness and mass matrices. Coupled natural frequencies of asymmetric and monosymmetric beams are obtained for a variety of classical boundary conditions, and a reasonably good agreement has been achieved with the exact results published in the literature.

A. N. Bercin | M. Tanaka | M. Tanaka | A. N. Berçin

[1] Richard Evelyn Donohue Bishop,et al. On coupled bending and torsional vibration of uniform beams , 1989 .

[2] J. R. Banerjee,et al. Exact dynamic stiffness matrix of a bending-torsion coupled beam including warping , 1996 .

[3] V. Vlasov. Thin-walled elastic beams , 1961 .

[4] T. H. Richards,et al. An accurate method in structural vibration analysis , 1977 .

[5] J. Z. Zhu,et al. The finite element method , 1977 .

[6] C. Mei. Coupled vibrations of thin-walled beams of open section using the finite element method , 1970 .

[7] E. Dokumacı. An exact solution for coupled bending and torsion vibrations of uniform beams having single cross-sectional symmetry , 1987 .

[8] P. O. Friberg. Coupled vibrations of beams—an exact dynamic element stiffness matrix , 1983 .

[9] R. J. Pryputniewicz,et al. Theoretical and experimental study of coupled vibrations of channel beams , 1995 .

[10] J. S. Rao,et al. Solution of the equations of motion of coupled-bending bending torsion vibrations of turbine blades by the method of ritz-galerkin , 1970 .

[11] W. H. Wittrick,et al. An automatic computational procedure for calculating natural frequencies of skeletal structures , 1970 .

[12] W. L. Hallauer,et al. Beam bending-torsion dynamic stiffness method for calculation of exact vibration modes , 1982 .