Itzï (version 17.1): an open-source, distributed GIS model for dynamic flood simulation

Abstract. Worldwide, floods are acknowledged as one of the most destructive hazards. In human-dominated environments, their negative impacts are ascribed not only to the increase in frequency and intensity of floods but also to a strong feedback between the hydrological cycle and anthropogenic development. In order to advance a more comprehensive understanding of this complex interaction, this paper presents the development of a new open-source tool named Itzi that enables the 2-D numerical modelling of rainfall–runoff processes and surface flows integrated with the open-source geographic information system (GIS) software known as GRASS. Therefore, it takes advantage of the ability given by GIS environments to handle datasets with variations in both temporal and spatial resolutions. Furthermore, the presented numerical tool can handle datasets from different sources with varied spatial resolutions, facilitating the preparation and management of input and forcing data. This ability reduces the preprocessing time usually required by other models. Itzi uses a simplified form of the shallow water equations, the damped partial inertia equation, for the resolution of surface flows, and the Green–Ampt model for the infiltration. The source code is now publicly available online, along with complete documentation. The numerical model is verified against three different tests cases: firstly, a comparison with an analytic solution of the shallow water equations is introduced; secondly, a hypothetical flooding event in an urban area is implemented, where results are compared to those from an established model using a similar approach; and lastly, the reproduction of a real inundation event that occurred in the city of Kingston upon Hull, UK, in June 2007, is presented. The numerical approach proved its ability at reproducing the analytic and synthetic test cases. Moreover, simulation results of the real flood event showed its suitability at identifying areas affected by flooding, which were verified against those recorded after the event by local authorities.

[1]  P. Bates,et al.  Applicability of the local inertial approximation of the shallow water equations to flood modeling , 2013 .

[2]  Edward Hanna,et al.  An analysis of the extreme rainfall in Yorkshire, June 2007, and its rarity , 2008 .

[3]  M. Hodgson,et al.  Accuracy of Airborne Lidar-Derived Elevation: Empirical Assessment and Error Budget , 2004 .

[4]  C. Sampson,et al.  Benchmarking urban flood models of varying complexity and scale using high resolution terrestrial LiDAR data , 2011 .

[5]  S. Djordjević,et al.  Potential and limitations of 1D modelling of urban flooding , 2004 .

[6]  P. Bates,et al.  A subgrid channel model for simulating river hydraulics and floodplain inundation over large and data sparse areas , 2012 .

[7]  Adrián Pedrozo-Acuña,et al.  Evaluation of inundation areas resulting from the diversion of an extreme discharge towards the sea: case study in Tabasco, Mexico , 2012 .

[8]  Paul D. Bates,et al.  Improving the stability of a simple formulation of the shallow water equations for 2‐D flood modeling , 2012 .

[9]  T. Coulthard,et al.  The Hull floods of 2007: implications for the governance and management of urban drainage systems , 2010 .

[10]  C. Sampson,et al.  Use of terrestrial laser scanning data to drive decimetric resolution urban inundation models , 2010 .

[11]  Paul D. Bates,et al.  How much physical complexity is needed to model flood inundation? , 2012 .

[12]  Markus Metz,et al.  GRASS GIS: A multi-purpose open source GIS , 2012, Environ. Model. Softw..

[13]  Theo G. Schmitt,et al.  Analysis and modeling of flooding in urban drainage systems , 2004 .

[14]  P. Bates,et al.  A simple inertial formulation of the shallow water equations for efficient two-dimensional flood inundation modelling. , 2010 .

[15]  Edzer J. Pebesma,et al.  TGRASS: A temporal GIS for field based environmental modeling , 2014, Environ. Model. Softw..

[16]  Tom J. Coulthard,et al.  Evaluating the importance of catchment hydrological parameters for urban surface water flood modelling using a simple hydro-inundation model , 2015 .

[17]  V. T. Chow Open-channel hydraulics , 1959 .

[18]  P. D. Batesa,et al.  A simple raster-based model for flood inundation simulation , 2000 .

[19]  Albert S. Chen,et al.  A novel approach to model dynamic flow interactions between storm sewer system and overland surface for different land covers in urban areas , 2015 .

[20]  T. Chang,et al.  Inundation simulation for urban drainage basin with storm sewer system , 2000 .

[21]  Paul D. Bates,et al.  A high‐resolution global flood hazard model† , 2015, Water resources research.

[22]  P. Bates,et al.  Two dimensional diffusion wave modelling of flood inundation using a simplified channel representation , 2004 .

[23]  Jin Chen,et al.  Global land cover mapping at 30 m resolution: A POK-based operational approach , 2015 .

[24]  Michele Guidolin,et al.  A weighted cellular automata 2D inundation model for rapid flood analysis , 2016, Environ. Model. Softw..

[25]  Albert S. Chen,et al.  A 2D parallel diffusive wave model for floodplain inundation with variable time step (P-DWave) , 2014 .

[26]  Olivier Delestre,et al.  SWASHES: a compilation of shallow water analytic solutions for hydraulic and environmental studies , 2011, 1110.0288.

[27]  P. Bates,et al.  Integrating the LISFLOOD‐FP 2D hydrodynamic model with the CAESAR model: implications for modelling landscape evolution , 2013 .

[28]  Marco Ciolli,et al.  Pygrass: An Object Oriented Python Application Programming Interface (API) for Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS) , 2013, ISPRS Int. J. Geo Inf..

[29]  L. Ahrens,et al.  Physics and Chemistry of the Earth , 1980 .

[30]  C. Sampson,et al.  An automated routing methodology to enable direct rainfall in high resolution shallow water models , 2013 .

[31]  Stefan Behnel,et al.  Cython: The Best of Both Worlds , 2011, Computing in Science & Engineering.

[32]  S. Lane,et al.  Urban fluvial flood modelling using a two‐dimensional diffusion‐wave treatment, part 1: mesh resolution effects , 2006 .

[33]  T. J. Chang,et al.  An integrated inundation model for highly developed urban areas. , 2005, Water science and technology : a journal of the International Association on Water Pollution Research.

[34]  Nancy Nichols,et al.  Analytic Benchmark Solutions for Open-Channel Flows , 1997 .

[35]  P. Bates,et al.  Benchmarking 2D hydraulic models for urban flooding , 2008 .