Design of an Haptic Tactile Interface (HTI) with Friction Coefficient Measurements

An haptic tactile interface (HTI) is presented with its modeling. Its design is dedicated to perform friction coefficient measurement to characterize reachable feelings with that kind of interface. Friction measurements are presented and discussed.

[1]  W. E. Langlois.  Isothermal squeeze films , 1961 .

[2]  J. Edward Colgate,et al.  T-PaD: Tactile Pattern Display through Variable Friction Reduction , 2007, Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (WHC'07).

[3]  B. Lemaire-Semail,et al.  Squeeze film effect for the design of an ultrasonic tactile plate , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Frédéric Giraud,et al.  Power Consumption Reduction of a Controlled Friction Tactile Plate , 2010, EuroHaptics.

[5]  Yves Perriard,et al.  Modeling of the air film pressure for a haptic touch actuator , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[6]  Yoan Civet,et al.  Optimal design of a squeeze film actuator for friction feedback , 2013, 2013 International Electric Machines & Drives Conference.

[7]  Mélisande Biet.  Conception et contrôle d'actionneurs électro-actifs dédiés à la stimulation tactile , 2007 .

[8]  Betty Lemaire-Semail,et al.  Design of a transparent tactile stimulator , 2012, 2012 IEEE Haptics Symposium (HAPTICS).